DOWNLOAD LG F1069FD Service Manual ↓ Size: 6.98 MB | Pages: 44 in PDF or view online for FREE

The display shows the vend price and remaining time
and programming options. Error codes are also
displayed here.

1

Wash time or rinse cycle can be added when
additional coin is inserted or a valid cash card is
entered.

LED flashes whenever the washing
cycle is in operation.

LED flashes whenever the Rinsing
cycle is in operation.

LED flashes whenever the Spining
cycle is in operation.  

LED flashes whenever the door lock
is activated.

3

The START LED flashes when the full vend price
has been satisfied and the cycle has been chosen.

4

5

Press the CYCLE button to select the desired cycle
based on laundry types and conditions.

Use for hot washing for heavy fabrics, such as white
clothes, table linens, and heavily soiled clothes.

Use for warm washing for heavy fabrics, such as
jeans, corduroys, or work clothes.

Use for cold washing for synthetic fabrics, such as
washable knit fabric and no-iron finishes.

Use for warm washing for sturdy fabrics, such as
work casual work.

2

WHITES

Cotton, Linen, Towels, Shirts,
Sheets

Mixed Loads, Work Clothes,
Jeans, Shirts

Dress Shirts/Blouses, 
Nylons, Sheer or Lacy Garment

Dress Shirts/Pants, Wrinkle
Free Clothing, Poly/Cotton
Blend Clothing, Tablecloths. 

COLORS

DELICATES

PERM.
PRESS

Hot/Cold

Warm/Cold

Cold/Cold

Warm/Cold

High

High

Low

Medium

O

O

O

O

- Adds an additional 3 minutes of washing time and an extra rinse

7. WIRING DIAGRAM/PROGRAM CHART

Program Chart

RQP

TP

TP

SV

SV

1. Push the WHITES & DELICATES button at the same time.
2. Push the COLORS button 3 times.
3. Push the START button.
4 Display will show “            “

8. TROUBLESHOOTING

8-1. BEFORE PERFORMING SERVICE

8-2. QC TEST MODE.

Be careful of electric shock when disconnecting parts while troubleshooting.

Card Type

The washer must be empty.

1. Insert Service Card
2.

Display

3. Press the Start button repeatedly to cycle through the test modes.

8-3. HOW TO CHECK THE WATER LEVEL FREQUENCY

8-4. HOW TO CHECK THE RPM

Press and hold the ADD SUPER WASH and PERMANENT PRESS buttons simultaneously.

Press the ADD SUPER WASH AND WHITES button simultaneously.

When you check the water level, the first digit is a 0 which means 2. 
A display indicating 041 is a water level frequency of 241 multiplied by 0.1 KHz , for an
actual frequency of 24.1 KHz. 

Under 200 rpm: The display indicates the rpm. (Under 200 rpm) 
Over 200 rpm: The display indicates the rpm. (x 10 rpm)
So, for example a display indicating 050 : rpm of 050 x 10 rpm = 500rpm 

Coin Type

1. Turn on/off  toggle switch
2.

Display

3. Press the Start button repeatedly to cycle through the test modes.

The voltage of each terminal is 220V- when the unit is plugged in.

OPL / CoinType

* This machine do not use circulation system

Number of times the 

START button is pressed

Check Point

Display

None
1 time

2 times
3 times
4 times
5 times
6 times
7 times
8 times
9 times

10 times

Turns on all lamps and locks the door

rpm (42~50)

rpm(1000~1150)
Water level frequency (26,2~23,0 kHz)
Water level frequency (26,2~23,0 kHz)
Water level frequency (26,2~23,0 kHz)
Water level frequency (26,2~23,0 kHz)
rpm (42~50)

Tumble Clockwise.
Low Speed Spin
High Speed Spin
Inlet valve for main water turns on.
Inlet valve for hot water turns on.
Inlet valve for softener turns on.
Inlet valve for bleach turns on.
Tumble counter clockwise.

Turn on the heater

Displayed 1U XX, 1g XX and 1O XX
alternately (Version)

16 times

15 times

12 times

11 times

13 times
14 times

High Speed Spin

PDA Signal Check

rpm (1000~1150)

This function is not applied in this machine

Displayed 1U XX, 1g XX and 1O XX alternately

Button Checks.

Turns on all lamps.

Drain Pump turns on.

Displayed 1U XX, 1g XX and 1O XX alternately

Water level frequency (26,2~23,0 kHz)

rpm (550~650)

Displayed XX