LG F1069FD Service Manual ▷ View online
4
2. SPECIFICATIONS
POWER SUPPLY
PRODUCT WEIGHT
PTC + Solenoid
10 steps (by sensor)
Incorporated
Incorporated
686
(W) X 767
(D) X 983
(H), X 129.1 cm (D with door open)
CYCLES
OPTIONS
CONTROL TYPE
WASH CAPACITY
DIMENSIONS
DOOR SWITCH TYPE
WATER LEVEL
LAUNDRY LOAD SENSING
ERROR DIAGNOSIS
OPERATIONAL WATER PRESSURE
ELECTRIC POWER
CONSUMTION
WASHING
DRAIN MOTOR
F1069FD F1069FD4 F1069FD6 F1069FD7 F1069FD2 F1069FD3
BLUE WHITE
220V~60Hz
87 kg
500 W
30 W
45 rpm
1150 RPM
4
ADD SUPER WASH Cycle
1.0 -8.0 kgf/cm 2 (100 -800 kPa)
Electronic
13kg
REVOLUTION SPEED
WASH
SPIN
COLOR
MODEL
5
3. FEATURES & TECHNICAL EXPLANATION
3-1. FEATURES
એ
Direct Drive System
The advanced Brushless DC motor directly drives the drum
without belt and pulley.
એ
The Tilted Drum and Extra La
Tilted drum and extra large door opening make it possible
to load and unload easily.
એ
Ultra Capacity
The larger drum enables not just higher head drop and stronger centrifugal
force, but also less tangling and wrinkling of the laundry. Heavier loads, such
as king size comforters, blankets, and curtains, can be washed.
એ
Large Door and Window
The large window lets you see the wash as it progresses.
એ
The Stainless Steel drum
એ
Magnetic Door Plunger
Safely and conveniently secure the door slightly ajar with the magnetic door plunger. This will
promote air circulation and allow the interior of the machine to dry. To use this feature, after the
load has been removed, do not close the door completely. When the magnetic door plunger
comes into contact with the metal washer cabinet, it will secure the door slightly open allowing the
interior of the washer to dry.
rge Door Opening
એ
Automatic
Automatically detects the load and optimizes the washing time.
Wash Load Detection
6
3-2. WATER LEVEL CONTROL
ઊ
This model incorporates a pressure sensor which can sense the water level in the tub.
ઊ
The water supply is stopped when the water level reaches the preset level; then the selected cycle begins.
ઊ
Spinning does not proceed until the water in the tubdrains to a certain level.
3-3. DOOR CONTROL
ઊ
The door can be opened by pulling the door handle whenever washer is not in operation.
ઊ
When the cycle is completed, the DOOR LOCKED light will turn off.
ઊ
If a power failure has occurred while in operation, the door will unlock after 2 minutes.
ઊ
Clicking sounds can be heard when the door is locked/unlocked.
3-4. THE DOOR CAN NOT BE OPENED
ઊ
While program is operating.
ઊ
While Door Lock lights turn on.
ઊ
While the drum is rotating.
3-5. DOOR LOCKED LAMP LIGHTS
ઊ
When the frequency of water level is lower than 22.9 kHz.
(It can be canceled when the frequency is more than 23.8 kHz.)
ઊ
When the temperature inside the tubis higher than 45 C (104 F) and water level is not 25.5 kHz.
(It can be canceled when the water level is 25.5 kHz or the temperature inside the tub is lower than
40 C (113 F). )
40 C (113 F). )
4. PARTS IDENTIFICATION
Drain Hose
Dispenser
Door
Lower Cover Cap
Drain Plug
Drain Pump Filter
Adjustable Feet
Power Plug
Control Panel
Shipping Bolts (4)
Cold Water Inlet
Hot Water Inlet
Air Vent for Safety
If the supply cord is damaged,
it must be replaced by the
manufacturer or an authorized
service technician in order to
avoid a hazard.
it must be replaced by the
manufacturer or an authorized
service technician in order to
avoid a hazard.
Name:
Front-loading Washing Machine
Power supply:
220V~ 60Hz
Size:
686 mm (W) X 767 mm (D) X 983 mm (H), 129.1 cm (D with door open)
Weight:
87 kg
Wash capacity:
13kg
Spin speed:
1150 rpm max.
Permissible water pressure: 1.0 -8.0 kgf/cm 2 (100 -800 kPa)
Back of Washer
Specifications subject to change by manufacturer.
Note
Accessories
Inlet hose :
Hot / Col (2EA)
Elbow Bracket
(for securing drain hose)
Tie Strap
(for securing drain hose)
Wrench
(for removing shipping
bolts and adjusting
leveling feet)
Caps (4)
(for covering shipping bolt holes)
Non-skid pads
Drum
7
Magnet Door
Plunger
Plunger
(see page 5)
Click on the first or last page to see other F1069FD service manuals if exist.