LG 41532 Service Manual ▷ View online
6
2-5. THE DOOR CAN NOT BE OPENED
While program is operating.
When a power failed and power plug is taken out in operation
While Door Lock lights turn on.
White the motor is in the process of intertial rotating, through the operation is paused.
When a power failed and power plug is taken out in operation
While Door Lock lights turn on.
White the motor is in the process of intertial rotating, through the operation is paused.
2-7. CONTROL LOCK
Use this option to prevent unwanted use of the washer. Press and hold CONTROL LOCK button for 5
seconds to lock/unlock control.
When child lock is set, CONTROL LOCK lights and all buttons are disabled except the POWER
button. You can lock the controls of the washer while washing.
CONTROL LOCK lasts after the end of cycle. If you want to deactivate this function,
Press and hold the CONTROL LOCK button for 5 seconds.
seconds to lock/unlock control.
When child lock is set, CONTROL LOCK lights and all buttons are disabled except the POWER
button. You can lock the controls of the washer while washing.
CONTROL LOCK lasts after the end of cycle. If you want to deactivate this function,
Press and hold the CONTROL LOCK button for 5 seconds.
2-6. DOOR LOCKED LAMP LIGHTS
When the frequency of water level is lower than 22.9 kHz.
(It can be canceled when the frequency is more than 23.8 kHz.)
When the temperature inside the tub is higher than 45°C and water level is not 25.5 kHz.
(It can be canceled when the water level is 25.5 kHz or the temperature inside the tub is lower than 40°C.)
(It can be canceled when the frequency is more than 23.8 kHz.)
When the temperature inside the tub is higher than 45°C and water level is not 25.5 kHz.
(It can be canceled when the water level is 25.5 kHz or the temperature inside the tub is lower than 40°C.)
7
3. PARTS IDENTIFICATION
ACCESSORIES
Wrench
Tie strap (Option)
to secure drain hose to standpipe,
inlet hose, or laundry tub
Hot and Cold
Water Hoses
Non-skid pads
Caps(4)
(for covering shipping
bolt holes)
Elbow Bracket
(for securing drain hose)
4. INSTALLATION & TEST
1
2
3
4
5
6
7
6
REMOVE THE SHIPPING
BOLTS
• Remove the 4 shipping bolts
with the supplied wrench.
Do first lower side to remove easily.
•
Turn the leveling feet to adjust
the appliance.
the appliance.
•
Turn clockwise to raise;
counterclockwise to lower.
counterclockwise to lower.
• Keep the shipping bolts and
spanner for future use.
• Insert the 4 caps (provided)
into the hole.
ADJUST THE
LEVELING
INSTALL THE APPLIANCE
ON A FLAT AND FIRM SURFACE
8
Before servicing, ask the customer what the trouble is.
When installing or repairing the washer, put on long sleeve gloves and safety glasses.
Check the setup (power supply is 120V, remove the transit bolts, level the washer...)
Check with the troubleshooting guide.
Plan your service method by referring to the disassembly instructions.
Service the unit.
After servicing, operate the appliance to see whether it functions correctly.
When installing or repairing the washer, put on long sleeve gloves and safety glasses.
Check the setup (power supply is 120V, remove the transit bolts, level the washer...)
Check with the troubleshooting guide.
Plan your service method by referring to the disassembly instructions.
Service the unit.
After servicing, operate the appliance to see whether it functions correctly.
STANDARD INSTALLATION
The appliance should be installed as follows:
9
HOW TO CONNECT THE INLET HOSE
• Check the rubber seals on both sides of the hose.
• Connect the water hoses to the faucets.
• Turn on the water tap to remove foreign substance
such as dirt, sand, or sawdust in the water line, and
than check the water temperature.
• Connect the hoses to the water inlets.
Click on the first or last page to see other 41532 service manuals if exist.