DOWNLOAD LG 41532 Service Manual ↓ Size: 22.57 MB | Pages: 59 in PDF or view online for FREE

 Pre

Wash

NOTE: To  protect your garments, not every wash temperature, spin speed, soil level, or option is available 
            with every cycle. A chime will sound and the LED will not light if the selection is not allowed. 

The washer automatically adjusts the wash time for the amount of laundry, water pressure, water heating 
time and other operating conditions.

These cycles use various wash motions to enhance cleaning and/or fabric care performance. The wash 
motions may sound different at different stages of the wash cycle. This is normal.

Recommended test load size of sanitize course is 10 lbs.

5-2. CYCLE GUIDE

58

42

19

54 63

99 108

5-3. CYCLE OPTIONS

Select this option to add a prewash, rinse and spin cycle to the chosen cycle.

This is espe-cially useful for heavily soiled items. 

5-4. SPECIAL FUNCTION

5-5. EXPLANATION OF EACH PROCESS

No.

Process

Explanation

1.

Stay

• Electrical power is supplied
• Washer is ready to work and the micom is in the active mode.

2.

Water
supply

• After loading laundry and selecting a course and a cycle, water is

supplied and  drum rotates.

• When a user selects Pre-wash course, water is supplied through 

pre wash valve.

3.

Soaking
& washing
laundry

• To get laundry wet, drum rotates clockwise and counterclockwise.
• If water amount is insufficient at this time, the Inlet valve will supply

water again. 

4.

Heating &
washing

• The heater heats the water in drum to the selected water temperature

and drum rotates for washing. 

5.

~

6.

Washing
& heating
/ washing

• When the water temperature reaches to the selected temperature, the

heating stops and only the drum rotates.

• If water temperature becomes lower than selected because of 

re-supplied water, the heating starts again.

7.

Washing

• Fuzzy Logic decides washing time according to the laundry load, water

temperature, and other factors.

8.

Drainage

• A pump motor drains the water from the drum.
• After sensing drained water amount by water level frequency, spin starts.
• When a heating course is selected, stay cooling process is performed to

decrease the water temperature gradually to prevent laundry from being
damaged and for safety reasons.

9.

Untangling
(Sensing
eccent-
ricity)

• It balances laundry load and senses the eccentricity of the load, to only

allow spinning  without vibration 

• If the eccentricity is worse than the allowed level, it repeats the

disentangling process. When the repeated time is more than allowed
level, it displays UE.

• If the eccentricity is good, the intermittent spin starts.
• During this process, the drain pump works for drainage intermittently.