LG LV-B1861HL Service Manual ▷ View online
–26–
R
R
R
1
2
• Before working, refer to "Connecting pipe
and cable to Indoor Unit" on page 32.
and cable to Indoor Unit" on page 32.
R
Inlet hanger
Hook
Cabinet Bottom
• Secure the unit to the Installation Plates with four M8
bolts and washers.
• Hook up the Inlet Grille Hook to the cabinet.
• Hang the Inlet Hanger to the screw.
• Hang the Inlet Hanger to the screw.
• Fit the projection hooks of the side plates to the 'Side
Panel' and the 'Front Panel' by lifting it.
• Fasten the screws.
–27–
1076
more than
260
265
Washer
Nut
Wall
Anchor nut
Spring
washer
washer
Wall
5~7mm
Less than
12mm
1236
Indoor
Outdoor
2) Installation on the Wall
• Select and mark the position for fixing bolts and piping
hole.
Decide the position for fixing bolts slightly tilted to the
drain direction after considering the direction of drain
hose.
Decide the position for fixing bolts slightly tilted to the
drain direction after considering the direction of drain
hose.
• Drill the hole for anchor nut on the wall.
• Drill the piping hole on the wall slightly tilted to the out-
door side using a ø70 hole-core drill.
• Secure the 'Install Plate' onto the wall with four anchor
bolts, washers and spring washers.
¡
Before secure the Install Plates, select the bent direc-
tion of the 'Install Plate' to the inside or outside
according to the installation circumstances.
tion of the 'Install Plate' to the inside or outside
according to the installation circumstances.
–28–
Install the Indoor unit onto Installation Plate.
• Insert 2 hooks on the both left and right side of the unit
to the inner slot (wall side) of the Installation Plate.
• Secure the unit to the Installation Plate with four M8
bolts and washers.
• Hook up the Inlet Grille Hook to the cabinet.
• Hang the Inlet Hanger to the screw.
• Hang the Inlet Hanger to the screw.
• Fit the projection hooks of the side plates to the 'Side
Panel' and the 'Front Panel' by lifting it.
• Fasten the screws.
R
2
1
• Before working, refer to "Connecting pipe
and cable to Indoor Unit" on page 32.
and cable to Indoor Unit" on page 32.
Inner slot
–29–
3) Installation on the floor
Installation of Mount Bracket.
• Select and mark the position for Mount Brackets and
the piping hole.
• Drill the hole for the anchor nut on the wall.
• Drill the piping hole using a ø70 hole-core drill.
• Secure the Mount Brackets on the wall with four M4
• Drill the piping hole using a ø70 hole-core drill.
• Secure the Mount Brackets on the wall with four M4
screws.
Install the indoor unit onto the Mount Brackets.
• Engage the slot at the back of the unit with Mount
Bracket.
•
Drill the piping hole with 70mm dia, hole core drill.
• Piping hole should be slightly slant to the outdoor side.
After Installing, reassemble detached parts.
• Hang the 'Inlet Grille' and hook the 'Inlet Hanger' to the
• Hang the 'Inlet Grille' and hook the 'Inlet Hanger' to the
Hanger Screw.
• Assemble the 'Side Plates(R,L)' with 2 screws on both
left and right side.
Floor mount
bracket
Slot
Floor mount
bracket
Install plate
bracket
Install plate
Slot
Piping hole
Wall
5~7mm
Indoor
Outdoor
more than 760mm
From the left wall
From the
right wall
right wall
448mm
more than 840mm
Wall
Click on the first or last page to see other LV-B1861HL service manuals if exist.