JBL PULSE (serv.man6) EMC - CB Certificate ▷ View online
- Page 8 of 8 -
www.nemko.com
Report No. 241619
Clause
Requirement - Test
Result - Remark
Verdict
N/A
N/A
- Page 1 of 5 -
www.nemko.com
Report No. 241619
SI 60950 Part 1 (2009)
Clause
Requirement + Test
Result - Remark
Verdict
ATTACHMENT: NATIONAL DIFFERENCES – ISRAEL
Test results according to Online CB BULLETIN (Last modified date of 2011-03-02)
1.7
Marking and instructions
The clause is applicable with the following additions:
- Subclause 1.7.201 shall be added at the beginning of the clause as follows:
The clause is applicable with the following additions:
- Subclause 1.7.201 shall be added at the beginning of the clause as follows:
1.7.201
Marking in the Hebrew language
The marking in the Hebrew language shall be in
accordance with the Consumer Protection Order
(Marking of goods), 1983.
In addition to the marking required by claus e
I.7.1, the following details shall be marked in the
Hebrew language.
The details shall be marked on the apparatus or
on its package, or on a label properly attached to
the apparatus or on the package, by bonding or
sewing, in a manner that the label cannot be
easily removed.
1. Name of the apparatus and it commercial
designation;
2. Manufacturer's name and address. If the
apparatus is imported, the importer's name and
address;
3. Manufacturer's registered trademark, if any;
4. Name of the model and serial number, if any;
5. Country of manufacture.
The marking in the Hebrew language shall be in
accordance with the Consumer Protection Order
(Marking of goods), 1983.
In addition to the marking required by claus e
I.7.1, the following details shall be marked in the
Hebrew language.
The details shall be marked on the apparatus or
on its package, or on a label properly attached to
the apparatus or on the package, by bonding or
sewing, in a manner that the label cannot be
easily removed.
1. Name of the apparatus and it commercial
designation;
2. Manufacturer's name and address. If the
apparatus is imported, the importer's name and
address;
3. Manufacturer's registered trademark, if any;
4. Name of the model and serial number, if any;
5. Country of manufacture.
Must be considered when market
to Israel.
to Israel.
1.7.2
Safety instructions and Marking
1.7.2.1 General
The following shall be added to the clause:
All the instructions and warnings related to safety
shall also be written in the Hebrew language.
1.7.2.1 General
The following shall be added to the clause:
All the instructions and warnings related to safety
shall also be written in the Hebrew language.
Must be considered when market
to Israel.
to Israel.
2.
Protection from Hazards
The clause is applicable with the following additions:
The clause is applicable with the following additions:
- Page 2 of 5 -
www.nemko.com
Report No. 241619
SI 60950 Part 1 (2009)
Clause
Requirement + Test
Result - Remark
Verdict
2.9.4
Separation from hazardous voltages
The following shall be added at the beginning of
the clause :
In Israel, according to the Electricity Law, 1954,
and the Electricity Regulations (Earthing and
means of protection against electricity of voltages
up to 1,000V) 1991, seven means of protection
against electrocution are permitted, as follows:
1) TN-S - Network system earthing; TN-C-S -
Network system earthing;
2) TT - Network system earthing;
3) IT - Network Insulation Terre;
4) Isolated transformer;
5) Safety extra low voltage (SELV or ELV) ;
6) Residual current circuit breaker (30 rna =I△);
7) Reinforced insulation; Double insulation (class
II)
The following shall be added at the beginning of
the clause :
In Israel, according to the Electricity Law, 1954,
and the Electricity Regulations (Earthing and
means of protection against electricity of voltages
up to 1,000V) 1991, seven means of protection
against electrocution are permitted, as follows:
1) TN-S - Network system earthing; TN-C-S -
Network system earthing;
2) TT - Network system earthing;
3) IT - Network Insulation Terre;
4) Isolated transformer;
5) Safety extra low voltage (SELV or ELV) ;
6) Residual current circuit breaker (30 rna =I△);
7) Reinforced insulation; Double insulation (class
II)
.
Clause 2.201 shall be added at the end of the
clause, as follows:
clause, as follows:
Class III equipment.
N/A
2.201
Prevention of electromagnetic interference
-
-
Prior to carrying out the tests in
accordance with the clauses of this
Standard, the compliance of the apparatus
with the relevant requirements specified in
the appropriate part of the Standard series,
SI 961, shall be checked.
The apparatus shall meet the requirements
in the appropriate part of the Standard series.
Standard, the compliance of the apparatus
with the relevant requirements specified in
the appropriate part of the Standard series,
SI 961, shall be checked.
The apparatus shall meet the requirements
in the appropriate part of the Standard series.
SI 961.
-
-
If there are components in the apparatus
for the prevention of electromagnetic
interference, these components shall not reduce
the safety level of the apparatus as required by
this Standard.
interference, these components shall not reduce
the safety level of the apparatus as required by
this Standard.
Must be considered when market
to Israel.
to Israel.
3.
Wiring, connections and supply
The clause is applicable with the following additions:
The clause is applicable with the following additions:
3.2
Connection to a mains supply
3.2.1
Means of connection
3.2.1.1
Connection to an a.c. mains supply
After the note, the following note shall be added:
Note:
In Israel, the feed plug shall comply with the
requirements of Israel Standard 51 32 Part I.
After the note, the following note shall be added:
Note:
In Israel, the feed plug shall comply with the
requirements of Israel Standard 51 32 Part I.
Class III equipment.
N/A
- Page 3 of 5 -
www.nemko.com
Report No. 241619
SI 60950 Part 1 (2009)
Clause
Requirement + Test
Result - Remark
Verdict
3.2.1.2
Connection to a d.c. mains supply
At the end of the first paragraph, the following
note shall be added:
Note:
At the time of issue of this Standard, there is no
Israel Standard for connection accessories to d.c.
At the end of the first paragraph, the following
note shall be added:
Note:
At the time of issue of this Standard, there is no
Israel Standard for connection accessories to d.c.
Not connect to DC mains supply.
N/A
Click on the first or last page to see other PULSE (serv.man6) service manuals if exist.