JBL ON CALL (serv.man2) EMC - CB Certificate ▷ View online
Appendix 1
Page 2 of 6
ST- 06153
11
INSULATION RESISTANCE AND ELECTRIC STRENGTH
11.1
Insulation resistance test: d.c. 500 V, applied for
60
s. The insulation resistance shall be more
than 5 M
Ω.
P
11.2
Electric strength test: a.c. 2000 V, 50 Hz, applied
for 1 min.
for 1 min.
After the test, no flashover or
breakdown occurred
breakdown occurred
P
13 MECHANICAL
STRENGTH
13.1 Compression
test:
150 N, 5 min. (shown as figure 7)
No deformation or any undue
change of dimensions
change of dimensions
P
13.2
Torque test on pins: 0.4 Nm, 1 min
No pin turn occurred
P
13.3
Abrasion test:
20 000 movements (fixed as figure 9)
No damage
P
13.4
Pull test with steel plate on pin:
Heated for 70 °C
± 2 °C, 60 min; pull force
40
N, 60
s. Displacement of the pin can not
be more than 1 mm
After the test, no pin
displacement occurred
displacement occurred
P
14
RESISTANCE TO HEAT AND TO AGEING
14.1.1
Heating test: 100 °C
± 2 °C, 1 hour
No damage
P
14.1.2
Compression test: 80 °C
± 2 °C, force 20 N,
60
min
No damage
P
14.2 Aging
test:
70 °C
± 2 °C, 168 hours; And then removed to
room temperature for 96 hours
No cracks visible
P
Forefinger wrap in a dry piece of rough cloth and
press the plug with a force of 5 N
press the plug with a force of 5 N
No traces
P
Appendix 1
Page 3 of 6
ST- 06153
15
CURRENT-CARRYING PARTS AND CONNECTIONS
15.1
Connections withstand the mechanical stresses
occurring in normal use
occurring in normal use
Complied P
15.2
Contact pressure not transmitted through
insulating material
insulating material
P
15.3
Material of current-carrying parts
> 58% copper
P
17
RESISTANCE OF INSULATING MATERIAL TO ABNORMAL HEAT AND TO
FIRE
FIRE
Glow-wire
test:
750 °C for parts necessary to retain current-
carrying parts in position; 650 °C for other parts
carrying parts in position; 650 °C for other parts
Flames and glowing
extinguished within 30 s
extinguished within 30 s
P
Appendix 1
Page 4 of 6
ST- 06153
Supplementary tests on plug portion according to EN 50075 or IEC 60884-1
Requirement - Test
References to
clauses in
Result-Remark
Comply
IEC
60884-1
EN 50075
1
Plug portion
CEE 7 Standard Sheet
XVI P
EN 50075
P
2
Dimensions
Checking dimensions by measuring
and by gauges according to
Standard sheet
and by gauges according to
Standard sheet
P
The edges of the metal-pins,
Chamfered or rounded off?
Chamfered or rounded off?
P
3
Protection against electric
shock
shock
a
Test finger (75 N, 1 min. in 35 °C)
10.1
8.1
P
or
Applicable appliance standard
b
Single pole insertion. Checked with
gauge:
gauge:
Figure
4
8.2
P
or
C19A or C19B (CEE 7)
9.2
P
c
Compression test 150 N, 5 min.
10.1
13.1
P
d
External parts made of insulating
material
material
10.4 8.3
P
4
Construction
a
Test on pins which are not solid
14.2
9.3
P
b
Pins shall be locked against
rotation 0.4 Nm 1 min.
rotation 0.4 Nm 1 min.
24.2 13.2
P
c
Pins shall be adequately fixed in
the body 1 min. Temperature 70 °C
the body 1 min. Temperature 70 °C
40 N for plugs < 2,5 A
50 N for plugs > 2,5 A
24.10 13.4
P
Appendix 1
Page 5 of 6
ST- 06153
Requirement - Test
References to
clauses in
Result-Remark
Comply
IEC
60884-1
EN 50075
d
Pins of copper or copper alloy min.
58 % copper or equivalent
58 % copper or equivalent
26.5-26.6
15.3
> 58 % copper
P
e
Plug shall not impose undue strain
on fixed socket-outlets, 0,25 Nm
on fixed socket-outlets, 0,25 Nm
14.23.2
Measured max.
0.07 Nm
P
f
Abrasion test on the insulating
sleeves 20000 movements
sleeves 20000 movements
24.7 13.3
P
5
Resistance of insulating
material to abnormal heat, to
fire and to tracking
material to abnormal heat, to
fire and to tracking
a
Compression test 1 h in 80 °C
25.4
14.1.2
P
b
Glow-wire test 750 °C
26.1.1
17
P
c
Resistance to tracking 175 V
(other than ordinary)
28.2
N/A
P - Pass; N/A - Not applicable
Click on the first or last page to see other ON CALL (serv.man2) service manuals if exist.