JBL ON BEAT EMC - CB Certificate ▷ View online
Page 20 of 39
Report Ref. No. 086-2101101501-000
TRF No.: IEC/EN60950_1c
4.7.3.3
Materials for components and other parts outside
fire enclosures
fire enclosures
N/A
4.7.3.4
Materials for components and other parts inside
fire enclosures
fire enclosures
N/A
4.7.3.5
Materials for air filter assemblies
No air filter assemblies.
N/A
4.7.3.6
Materials used in high-voltage components
No high voltage component
used.
used.
N/A
5
ELECTRICAL REQUIREMENTS AND SIMULATED ABNORMAL CONDITIONS
P
5.1
Touch current and protective conductor current
N/A
5.1.1
General
Class III equipment, SELV
circuit only.
circuit only.
N/A
5.1.2
Configuration of equipment under test (EUT)
N/A
5.1.2.1
Single connection to an a.c. mains supply
N/A
5.1.2.2
Redundant multiple connections to an a.c. mains
supply
supply
N/A
5.1.2.3
Simultaneous multiple connections to an a.c.
mains supply
mains supply
N/A
5.1.3
Test circuit
N/A
5.1.4
Application of measuring instrument
N/A
5.1.5
Test procedure
N/A
5.1.6
Test measurements
N/A
Supply voltage (V) ..............................................:
Measured touch current (mA) .............................:
Max. allowed touch current (mA) ........................:
Measured protective conductor current (mA) ......:
Max. allowed protective conductor current (mA) ..:
5.1.7
Equipment with touch current exceeding 3,5 mA
N/A
5.1.7.1
General ..............................................................:
N/A
5.1.7.2
Simultaneous multiple connections to the supply
N/A
5.1.8
Touch currents to telecommunication networks
and cable distribution systems and from
telecommunication networks
and cable distribution systems and from
telecommunication networks
N/A
5.1.8.1
Limitation of the touch current to a
telecommunication network or to a cable
distribution system
telecommunication network or to a cable
distribution system
N/A
Supply voltage (V) ..............................................:
Measured touch current (mA) .............................:
Max. allowed touch current (mA) ........................:
5.1.8.2
Summation of touch currents from
telecommunication networks
telecommunication networks
N/A
a) EUT with earthed telecommunication ports .....:
N/A
Page 21 of 39
Report Ref. No. 086-2101101501-000
TRF No.: IEC/EN60950_1c
b) EUT whose telecommunication ports have no
reference to protective earth
reference to protective earth
N/A
5.2
Electric strength
N/A
5.2.1
General
Class III equipment, SELV
circuit only.
circuit only.
N/A
5.2.2
Test procedure
Class III equipment, SELV
circuit only.
circuit only.
N/A
5.3
Abnormal operating and fault conditions
P
5.3.1
Protection against overload and abnormal
operation
operation
(see appended table 5.3)
P
5.3.2
Motors
N/A
5.3.3
Transformers
No isolating transformers.
N/A
5.3.4
Functional insulation ............................................: Class III equipment, SELV
circuit only
N/A
5.3.5
Electromechanical components
No electromechanical
components in secondary
circuits.
components in secondary
circuits.
N/A
5.3.6
Audio amplifiers in ITE .......................................: Audio amplifiers used in the
equipment and conducted
short-circuit at output of
speaker. (see appended
table 5.3)
short-circuit at output of
speaker. (see appended
table 5.3)
P
5.3.7
Simulation of faults
(see appended table 5.3).
P
5.3.8
Unattended equipment
N/A
5.3.9
Compliance criteria for abnormal operating and
fault conditions
fault conditions
See below.
P
5.3.9.1
During the tests
No fire or molten metal
occurred and no
deformation of enclosure
during the tests.
occurred and no
deformation of enclosure
during the tests.
P
5.3.9.2
After the tests
(see appended table 5.3)
P
6
CONNECTION TO TELECOMMUNICATION NETWORKS
N/A
6.1
Protection of telecommunication network service persons, and users of other
equipment connected to the network, from hazards in the equipment
equipment connected to the network, from hazards in the equipment
N/A
6.1.1
Protection from hazardous voltages
N/A
6.1.2
Separation of the telecommunication network from earth
N/A
6.1.2.1
Requirements
No such part
N/A
Supply voltage (V) ............................................. :
Current in the test circuit (mA) ......................... :
6.1.2.2
Exclusions ......................................................... :
N/A
Page 22 of 39
Report Ref. No. 086-2101101501-000
TRF No.: IEC/EN60950_1c
6.2
Protection of equipment users from overvoltages on telecommunication networks
N/A
6.2.1
Separation requirements
N/A
6.2.2
Electric strength test procedure
N/A
6.2.2.1
Impulse test
N/A
6.2.2.2
Steady-state test
N/A
6.2.2.3
Compliance criteria
N/A
6.3
Protection of the telecommunication wiring system from overheating
N/A
Max. output current (A) ...................................... :
Current limiting method ..................................... :
7
CONNECTION TO CABLE DISTRIBUTION SYSTEMS
N/A
7.1
General
No such part
N/A
7.2
Protection of cable distribution system service
persons, and users of other equipment connected
to the system, from hazardous voltages in the
equipment
persons, and users of other equipment connected
to the system, from hazardous voltages in the
equipment
N/A
7.3
Protection of equipment users from overvoltages
on the cable distribution system
on the cable distribution system
N/A
7.4
Insulation between primary circuits and cable
distribution systems
distribution systems
N/A
7.4.1
General
N/A
7.4.2
Voltage surge test
N/A
7.4.3
Impulse test
N/A
Page 23 of 39
Report Ref. No. 086-2101101501-000
TRF No.: IEC/EN60950_1c
A
ANNEX A, TESTS FOR RESISTANCE TO HEAT AND FIRE
N/A
A.1
Flammability test for fire enclosures of movable
equipment having a total mass exceeding 18 kg,
and of stationary equipment (see 4.7.3.2)
equipment having a total mass exceeding 18 kg,
and of stationary equipment (see 4.7.3.2)
No such condition
N/A
A.1.1
Samples ............................................................. :
Wall thickness (mm) ........................................... :
A.1.2
Conditioning of samples; temperature ( C) ........ :
N/A
A.1.3
Mounting of samples ......................................... :
N/A
A.1.4
Test flame (see IEC 60695-11-3)
N/A
Flame A, B, C or D ............................................ :
A.1.5
Test procedure
N/A
A.1.6
Compliance criteria
N/A
Sample 1 burning time (s) .................................. :
Sample 2 burning time (s) .................................. :
Sample 3 burning time (s) .................................. :
A.2
Flammability test for fire enclosures of movable equipment having a total mass
not exceeding 18 kg, and for material and components located inside fire
enclosures (see 4.7.3.2 and 4.7.3.4)
not exceeding 18 kg, and for material and components located inside fire
enclosures (see 4.7.3.2 and 4.7.3.4)
N/A
A.2.1
Samples, material .............................................. :
Wall thickness (mm) ........................................... :
A.2.2
Conditioning of samples; temperature (°C) ........ :
N/A
A.2.3
Mounting of samples ......................................... :
N/A
A.2.4
Test flame (see IEC 60695-11-4)
N/A
Flame A, B or C ................................................. :
A.2.5
Test procedure
N/A
A.2.6
Compliance criteria
N/A
Sample 1 burning time (s) .................................. :
Sample 2 burning time (s) .................................. :
Sample 3 burning time (s) .................................. :
A.2.7
Alternative test acc. to IEC 60695-11-5, cl. 5 and 9
N/A
Sample 1 burning time (s) .................................. :
Sample 2 burning time (s) .................................. :
Sample 3 burning time (s) .................................. :
A.3
Hot flaming oil test (see 4.6.2)
N/A
A.3.1
Mounting of samples
N/A
A.3.2
Test procedure
N/A
A.3.3
Compliance criterion
N/A
Click on the first or last page to see other ON BEAT service manuals if exist.