JBL ES 150P EMC - CB Certificate ▷ View online
Page 34 of 44
Report No. 707082
IEC
60065
Clause
Requirement – Test
Result - Remark
Verdict
TRF No.: IEC60065F
TRF Originator: ASTA BEAB
National differences Germany
IEC 60065:2001 + A1
(See also Group Differences)
CENELEC / DE 06 II
6.1
The following requirement applies:
For the operation of any cathode ray tube
intended for the display of visual images
operating at an acceleration voltage exceeding 40
kV, authorization is required, or application of
type approval (Bauartzulassung) and marking.
For the operation of any cathode ray tube
intended for the display of visual images
operating at an acceleration voltage exceeding 40
kV, authorization is required, or application of
type approval (Bauartzulassung) and marking.
Justification
:
N/A
Page 35 of 44
Report No. 707082
IEC
60065
Clause
Requirement – Test
Result - Remark
Verdict
TRF No.: IEC60065F
TRF Originator: ASTA BEAB
National differences Denmark
IEC 60065:2001 + A1
(See also Group Differences)
CB Bulletin 112A / DK 06 II
2.6.1
The following is added:
Certain types of CLASS I apparatus, see 15.1.1, may
be provided with a plug not establishing earthing
continuity when inserted in Danish socket-outlets
Justification:
Heavy Current Regulations, Section 107
Certain types of CLASS I apparatus, see 15.1.1, may
be provided with a plug not establishing earthing
continuity when inserted in Danish socket-outlets
Justification:
Heavy Current Regulations, Section 107
N/A
15.1.1
To the first paragraph the following is added:
In Denmark, supply cords of single phase appliances
having a rated current not exceeding 13 A shall be
provided with a plug according to the Heavy Current
Regulations Section 107-2-D1.
Appliances of CLASS I provided with socket-outlets
with earth contact or which are intended to be used in
locations where protection against indirect contact is
required according to the wiring rules shall be provided
with a plug in accordance with the Heavy Current
Regulations Section 107-2-D1 standard sheet DK 2-1a.
To the second paragraph the following is added:
Socket outlets intended for provided power to CLASS II
apparatus with a rated current of 2.5 A shall have the
following dimensions:
In Denmark, supply cords of single phase appliances
having a rated current not exceeding 13 A shall be
provided with a plug according to the Heavy Current
Regulations Section 107-2-D1.
Appliances of CLASS I provided with socket-outlets
with earth contact or which are intended to be used in
locations where protection against indirect contact is
required according to the wiring rules shall be provided
with a plug in accordance with the Heavy Current
Regulations Section 107-2-D1 standard sheet DK 2-1a.
To the second paragraph the following is added:
Socket outlets intended for provided power to CLASS II
apparatus with a rated current of 2.5 A shall have the
following dimensions:
Dimensions in mm
Other dimensions shall be in compliance with the
Heavy Current Regulations, Section 107-2-D1,
Standard Sheet DKA 1-3 for portable socket-outlets.
Shutters are not required.
To the third paragraph the following is added:
Mains socket-outlets with earthing contact shall be in
compliance with the Heavy Current Regulations,
Section 107-2-D1, Standard Sheet DK 1-3a, DK 1-5a
or DK 1-7a.
Justification
Other dimensions shall be in compliance with the
Heavy Current Regulations, Section 107-2-D1,
Standard Sheet DKA 1-3 for portable socket-outlets.
Shutters are not required.
To the third paragraph the following is added:
Mains socket-outlets with earthing contact shall be in
compliance with the Heavy Current Regulations,
Section 107-2-D1, Standard Sheet DK 1-3a, DK 1-5a
or DK 1-7a.
Justification
:
Heavy Current Regulations, Section 107
Only 1
st
paragraph
(Class II appliances and no
socket-outlets)
socket-outlets)
P
Page 36 of 44
Report No. 707082
IEC
60065
Clause
Requirement – Test
Result - Remark
Verdict
TRF No.: IEC60065F
TRF Originator: ASTA BEAB
National differences Ireland
IEC 60065:2001 + A1
(See also Group Differences)
CENELEC / IE 06 II
Apparatus which is fitted with a flexible cable or
cord shall be provided with a 13 A plug in
accordance with Statutory Instrument 525:97, “13
A Plugs and Conversion Adapters for Domestic
Use Regulations:1997.
cord shall be provided with a 13 A plug in
accordance with Statutory Instrument 525:97, “13
A Plugs and Conversion Adapters for Domestic
Use Regulations:1997.
Justification:
SI 525: 1997
SI 525: 1997
See Remark 1 under Summary
of testing
of testing
on page 3.
P
National differences United Kingdom
IEC 60065:2001 + A1
(See also Group Differences)
CB Bulletin 112A / GB 06 II
15.1.1
Apparatus which is fitted with a flexible cable or
cord and is designed to be connected to a mains
socket conforming to BS 1363 by means of that
flexible cable or cord and plug shall be fitted with
a ”standard plug” in accordance with Statutory
Instrument 1768: 1994: The Plugs and Sockets
etc. (Safety) Regulations 1994, unless exempted
by those Regulations.
NOTE ”Standard plug” is defined in SI 1768:1994
and essentially means an approved plug
conforming to BS 1363 or an approved
conversion plug.
Justification
cord and is designed to be connected to a mains
socket conforming to BS 1363 by means of that
flexible cable or cord and plug shall be fitted with
a ”standard plug” in accordance with Statutory
Instrument 1768: 1994: The Plugs and Sockets
etc. (Safety) Regulations 1994, unless exempted
by those Regulations.
NOTE ”Standard plug” is defined in SI 1768:1994
and essentially means an approved plug
conforming to BS 1363 or an approved
conversion plug.
Justification
: SI 1768: 1994
See Remark 1 under Summary
of testing
of testing
on page 3.
P
National differences Italy
IEC 60065:2001 + A1
(See also Group Differences)
CENELEC / IT 06 II
5.1
Additional markings on the outside of the TV
receiver in Italian language
receiver in Italian language
N/A
User instructions in Italian language including a
conformity declaration
conformity declaration
N/A
Certification number on the back cover
N/A
Page 37 of 44
Report No. 707082
IEC
60065
Clause
Requirement – Test
Result - Remark
Verdict
TRF No.: IEC60065F
TRF Originator: ASTA BEAB
National differences Norway
IEC 60065:2001 + A1
(See also Group Differences)
CB Bulletin 112A/ NO 06 II
13.3.1
To the second paragraph the following is added:
In Norway, due to the IT power distribution
system used, the a.c. MAINS supply voltage is
considered to be equal to the line-to-line voltage,
and will remain 230 V in case of a single earth
fault.
Justification:
Based on a use in Norway of an IT power
distribution system where the neutral is not
provided.
In Norway, due to the IT power distribution
system used, the a.c. MAINS supply voltage is
considered to be equal to the line-to-line voltage,
and will remain 230 V in case of a single earth
fault.
Justification:
Based on a use in Norway of an IT power
distribution system where the neutral is not
provided.
P
15.1.1 Mains
socket-outlets mounted on CLASS II
apparatus shall comply with the specifications
given in CEE Publ. 7 as fas as a Applicable, with
the following amendments:
§ 8 Dimensions
a 2.5 A 250 V two-pole socket-outlets for
electronic apparatus shall comply with the
enclosed Standard Sheet I.
given in CEE Publ. 7 as fas as a Applicable, with
the following amendments:
§ 8 Dimensions
a 2.5 A 250 V two-pole socket-outlets for
electronic apparatus shall comply with the
enclosed Standard Sheet I.
Justification:
Act of 24 May 1929 relating to supervision of
electrical installation (TEA 1929/FEL 1998).
Act of 24 May 1929 relating to supervision of
electrical installation (TEA 1929/FEL 1998).
N/A
Click on the first or last page to see other ES 150P service manuals if exist.