DOWNLOAD JBL CINEMA SOUND 3 (serv.man3) Service Manual ↓ Size: 6.63 MB | Pages: 65 in PDF or view online for FREE

 

                                                                            Page 12 of 64                   Report No. JSH006110064-001 

 

IEC/EN 60065 

Clause 

Requirement – Test 

Result - Remark 

Verdict 

 

TRF No:  IEC/EN 60065H 

 

       TRF originator Intertek ETL SEMKO SH 

 

 

14.3.3.1 

Clearances and creepage distances comply with 
clause 13 

(see appended table) 

P 

14.3.3.2 

Transformers meet the constructional 
requirements 

 P 

14.3.4.1 

Class II transformers have adequate separation 
between hazardous live parts and accessible parts 
(double or reinforced insulation) 

T501 basic insulation 
minimum 5.3 mm between 
T501 core and primary, 
Supplementary insulation 
minimum 2.9mm between 
T501 core and secondary. 

T502 basic insulation 
minimum 4.2 mm between 
T502 core and primary, 
Supplementary insulation 
minimum 4.2mm between 
T502 core and secondary. 

P 

 

Coil formers and partition walls > 0,4 mm 

T501 bobbin: 0.85mm 

T502 bobbin: 0.85mm 

P 

14.3.4.2 

Class I transformers, with basic insulation and 
protective screening only if all 7 conditions of 
14.3.4.2 are met 

 N/A 

14.3.4.3 

Separating transformers with at least basic 
insulation 

         

 N/A 

14.3.5.1 

Class II transformers have adequate insulation 
between hazardous live parts and accessible parts 
(double or reinforced insulation) 

T501 basic insulation 
minimum 5.3 mm between 
T501 core and primary, 
Supplementary insulation 
minimum 2.9mm between 
T501 core and secondary. 

T502 basic insulation 
minimum 4.2 mm between 
T502 core and primary, 
Supplementary insulation 
minimum 4.2mm between 
T502 core and secondary. 

P 

 

Coil formers and partition walls > 0,4 mm 

T501 bobbin: 0.85 mm 

T502 bobbin: 0.85 mm 

P 

14.3.5.2 

Class I transformers have adequate insulation 
between hazardous live parts and accessible 
conductive parts or those conductive parts or 
protective screens connected to a protective earth 
terminal 

 N/A 

 

                                                                            Page 13 of 64                   Report No. JSH006110064-001 

 

IEC/EN 60065 

Clause 

Requirement – Test 

Result - Remark 

Verdict 

 

TRF No:  IEC/EN 60065H 

 

       TRF originator Intertek ETL SEMKO SH 

 

 

 

Winding wires connected to protective earth have 
adequate current-carrying capacity 

 N/A 

14.4 

High voltage components 

No such component 

N/A 

 

High-voltage components and assemblies: 
U > 4 kV (peak) separately approved 

 N/A 

 

Component meets category V-1 of IEC 60707 

 

N/A 

14.4.1 

High voltage transformers and multipliers tested as 
part of the submission 

 N/A 

14.4.2 

High voltage assemblies and other parts tested as 
part of the submission 

 N/A 

14.5 Protective 

devices 

 

P 

 

Protective devices used within their ratings 

 

P 

 

External clearances and creepage distances meet 
requirement of clause 13 for the voltage across the 
device when opened 

Fuse F501: 3.7mm 

P 

14.5.1.1 

a) Thermal cut-outs separately approved 

No such components 

N/A 

 

b) Thermal cut-outs tested as part of the 
submission 

 N/A 

14.5.1.2 

a) Thermal links separately approved 

No such components 

N/A 

 

b) Thermal links tested as part of the submission 

 

N/A 

14.5.1.3 

Thermal devices re-settable by soldering 

 

N/A 

14.5.2.1 

Fuse-links in the mains circuit according to IEC 
60127 

F501 approved. 

P 

14.5.2.2 

Correct marking of fuse-links adjacent to holder ... : F501: T3.15A L 250V 

P 

14.5.2.3 

Not possible to connect fuses in parallel  ............... : Only one holder 

P 

14.5.2.4 

Not possible to touch hazardous live parts when 
replacing fuse-links without the use of a tool ......... :

Tools required 

N/A 

14.5.3 

PTC-S thermistors comply with IEC 60730-1 

No such component 

N/A 

 

PTC-S devices (15 W) category V-1 or better 

  

N/A 

14.5.4 Circuit 

protectors 

have adequate breaking capacity 

and their position is correctly marked 

         

 N/A 

14.6 Switches 

No 

switch 

N/A 

 

                                                                            Page 14 of 64                   Report No. JSH006110064-001 

 

IEC/EN 60065 

Clause 

Requirement – Test 

Result - Remark 

Verdict 

 

TRF No:  IEC/EN 60065H 

 

       TRF originator Intertek ETL SEMKO SH 

 

 

14.6.1 a) 

Separate testing to IEC 61058 including: 

10 000 operations 

Normal pollution suitability 

Resistance to heat and fire level 3 

and 

V-0 compliance with annex G, G.1.1 

         

 N/A 

14.6.1 b) 

Tested in the apparatus: 

 

N/A 

 

Switch controlling > 0.2A with open contact  
voltage > 35 V (peak)/24 V dc complying with 
14.6.3, 14.6.4 and V-0 in annex G, G.1.1 

 N/A 

 

Switch controlling > 0.2A with open contact  
voltage < 35 V (peak)/24 V dc complying with 
14.6.3 and V-0 in annex G, G.1.1 

 N/A 

 

Switch controlling < 0.2A with open contact  
voltage > 35 V (peak)/24 V dc complying with  
14.6.4 and V-0 in annex G, G.1.1 

         

 N/A 

14.6.2 

Switch tested to 14.6.1 b) constructed to IEC 
61058-1 subclause 13.1 and has making/breaking  
action independent of speed of actuation 

         

 N/A 

14.6.3 

Switch tested to 14.6.1 b) compliant with IEC 
61058-1 subclause 16.2.2 d) and  m) not attaining 
excessive temperatures in use 

         

 N/A 

14.6.4 

Switch tested to 14.6.1 b) has adequate dielectric 
strength 

         

 N/A 

14.6.5 

Mains switch controlling mains socket outlets 
additional tests to IEC 60058-1 

         

 N/A 

 

Socket outlet current marking correct 

         

 N/A 

14.7 

Safety interlocks 

No such device 

N/A 

 

Safety interlocks to 2.8 of IEC 60950 

 

N/A 

14.8 

Voltage setting devices 

No such device 

N/A 

 

Voltage setting device not likely to be changed 
accidentally 

         

 N/A 

14.9 

Motors 

Only low voltage DC servo 
motor in DVD loader 

N/A 

14.9.1 

Endurance test on motors 

         

 N/A 

 

Motor start test 

         

 N/A 

 

Dielectric strength test 

         

 N/A 

 

                                                                            Page 15 of 64                   Report No. JSH006110064-001 

 

IEC/EN 60065 

Clause 

Requirement – Test 

Result - Remark 

Verdict 

 

TRF No:  IEC/EN 60065H 

 

       TRF originator Intertek ETL SEMKO SH 

 

 

14.9.2 

Not adversely affected by oil or grease etc. 

         

 N/A 

14.9.3 

Protection against moving parts 

         

 N/A 

14.9.4 

Motors with phase-shifting capacitors, three-phase 
motors and series motors meet clause. B.8, B.9 
and B.10 of IEC 60950, Annex B 

         

 N/A 

14.10 Batteries 

 

P 

14.10.1 

Batteries mounted with no risk of accumulation of 
flammable gases 

Only non-rechargeable alkali 
batteries in IR remote 
controller. 

P 

14.10.2 

No possibility of recharging non-rechargeable 
batteries 

No recharging circuit in 
apparatus 

N/A 

14.10.3 

Recharging currents and times within 
manufacturers limits 

         

 N/A 

 

Lithium batteries discharge and reverse currents 
within the manufacturers limits 

         

 N/A 

14.10.4 

Battery mould stress relief 

 

N/A 

14.10.5 

Battery drop test 

 

N/A 

14.11 

Optocouplers 

Separately approved, see 
appended table 

P 

 

Optocouplers comply with Cl. 8 

P 

 

int./ext. Input + output Cl./Cr.: 
6.4mm / 6.4mm 

P 

14.12 

Surge suppression varistors 

 

P 

 

Comply with IEC 61051-2 

 

P 

 

Not connected between mains and accessible 
parts except for earthed parts of permanently 
connected apparatus 

 P 

 

Complies with the current pulse, fire hazard and 
thermal stress requirements of 14.12 

 P 

 
 

15 TERMINALS 

 

15.1.1 

Mains plug, appliance inlet, interconnection 
couplers and mains socket-outlet meet the 
appropriate standard 

 P 

15.1.2 

Connectors for antenna, earth, audio, video or data: 

 

 

No risk of insertion in mains socket-outlets 

 

P