Harman Kardon SB 26 (serv.man3) EMC - CB Certificate ▷ View online
Page 5 of 40
Report No.: ACSCBAV13004
TRF No. IEC60065K
Test item particulars .................................................. :
Classification of installation and use ...................... : Not portable, table-top or wall-mounted
(for model SB26 CNTR)
Not portable, table-top (for model SB26 SUB)
Not portable, table-top (for model SB26 SUB)
Supply Connection .................................................... : Not directly connected to the mains
(for model SB26 CNTR)
Detachable power supply cord (for model SB26
SUB)
Detachable power supply cord (for model SB26
SUB)
Possible test case verdicts:
- test case does not apply to the test object .......... : N/A (Not Applicable)
- test object does meet the requirement ................. : Pass
- test object does not meet the requirement .......... : Fail
Testing:
Date of receipt of test item........................................ : April 27, 2013
Date (s) of performance of tests .............................. : April 27, 2013 to May 31, 2013
Date (s) of performance of tests .............................. : April 27, 2013 to May 31, 2013
General remarks:
The test results presented in this report relate only to the object tested.
This report shall not be reproduced, except in full, without the written approval of the Issuing testing
laboratory.
”(see Enclosure #)” refers to additional information appended to the report.
”(see appended table)” refers to a table appended to the report.
Throughout this report a
This report shall not be reproduced, except in full, without the written approval of the Issuing testing
laboratory.
”(see Enclosure #)” refers to additional information appended to the report.
”(see appended table)” refers to a table appended to the report.
Throughout this report a
comma /
point is used as the decimal separator.
Manufacturer’s Declaration per sub-clause 6.2.5 of IECEE 02:
The application for obtaining a CB Test Certificate
includes more than one factory location and a
declaration from the Manufacturer stating that the
sample(s) submitted for evaluation is (are)
representative of the products from each factory
has been provided ......................................................:
includes more than one factory location and a
declaration from the Manufacturer stating that the
sample(s) submitted for evaluation is (are)
representative of the products from each factory
has been provided ......................................................:
Yes
Not applicable
Not applicable
When differences exist; they shall be identified in the General product information section.
Name and address of factory (ies)…………:
1. TCL TECHNOLY ELECTRONICS (HUIZHOU) CO.,
LTD
Section 19, Zhongkai High-tech Development Zone,
Huizhou City, Guang Dong Province, China, 516006
LTD
Section 19, Zhongkai High-tech Development Zone,
Huizhou City, Guang Dong Province, China, 516006
2. TCL TECHNOLY ELECTRONICS (HUIZHOU) CO.,
LTD
Section 37, Zhongkai High-tech Development Zone,
Huizhou City, Guang Dong Province, China, 516006
Page 6 of 40
Report No.: ACSCBAV13004
TRF No. IEC60065K
General product information:
Report Summary
Product Description
1 This equipment under test (EUT) with model SB26 is a Soundbar Speaker System which combines a BT
soundbar with model SB26 CNTR and a wireless subwoofer with model SB26 SUB. This system is
provided with optical, HDMI input, HDMI output at rear enclosure and IR remote control for most of all
functions,.
provided with optical, HDMI input, HDMI output at rear enclosure and IR remote control for most of all
functions,.
2 SB26 CNTR is supplied by External Approval Adaptor. The soundbar is housed within plastic enclosure
and electronic components mounted on PWB.
3 SB26 SUB with a built-in power supply board is supplied by the Mains. The subwoofer is housed within
a wooden enclosure and electronic components mounted on PWB.
4 The soundbar controls subwoofer via wireless signal and subwoofer cannot operate by itself. Normal
operation as the soundbar sent signal to subwoofer via wireless signal, generated sound and controlled
system by IR remote. And the subwoofer operated by signal from soundbar.
system by IR remote. And the subwoofer operated by signal from soundbar.
Model Differences
N/A
Additional Information
N/A
Technical Considerations
1 Mass of equipment:
Approx. 3.5 kg for SB26 CNTR (soundbar), and 9.7 kg for SB26 SUB (subwoofer)
2 The equipment under test (EUT) has been evaluated for moderate and tropical climates.
3 This soundbar also could be mounted on the wall, the user’s manual specified the relevant information
for mounting accessories.
Page 7 of 40
Report No.: ACSCBAV13004
IEC 60065
Clause
Requirement + Test
Result - Remark
Verdict
TRF No. IEC60065K
3 General
requirements
-
Safety class of the apparatus .................................. :
Class II.
Pass
4
General test conditions
-
4.1.4
Ventilation instructions require the use of the test
box
box
Yes. Pass
5
Marking and instructions
-
Comprehensible and easily discernible
Pass
Permanent durability against water and petroleum
spirit
spirit
Pass
5.1
a) Identification, maker .............................................: harman/kardon
Pass
b) Model number or type reference..........................: SB26, SB26 CNTR,
SB26 SUB
Pass
c) Class II symbol if applicable ................................:
for SB26 CNTR
Pass
d)
Nature
of supply....................................................: For SB26 CNTR:
For SB26 SUB: ~
Pass
e) Rated supply voltage ...........................................: For SB26 CNTR: 24V
For SB26 SUB: 100-240V
Pass
f) Mains frequency if safety dependant ...................: For SB26 CNTR: DC supplied
For SB26 SUB: 50/60Hz
Pass
g) Rated current or power consumption for
apparatus supplied by supply apparatus for general
use ............................................................................:
apparatus supplied by supply apparatus for general
use ............................................................................:
N/A
Measured current or power consumption ...............:
N/A
Deviation
%
(max 10%) ...........................................:
N/A
h) Rated current or power consumption for apparat-
us intended for connection to an a.c. mains supply.:
us intended for connection to an a.c. mains supply.:
For SB26 CNTR: 2.7A
For SB26 SUB: 100W
For SB26 SUB: 100W
Pass
Measured current or power consumption ...............: See appended table 7.1.
Pass
Measured current or power consumption for
Television set ...........................................................:
Television set ...........................................................:
N/A
Deviation
%
(max 10%) ...........................................:
Pass
5.2
a) Earth terminal
No such terminals.
N/A
b) Hazardous live terminals
No such terminals.
N/A
c) Markings on supply output terminals
No such terminals.
N/A
5.3
a) Use of triangle with exclamation mark
For SB26 SUB, such symbol is
indicated on circuit diagram for
specific components.
indicated on circuit diagram for
specific components.
Pass
b) marking on loudspeaker grille, IEC 60417-5036
N/A
Page 8 of 40
Report No.: ACSCBAV13004
IEC 60065
Clause
Requirement + Test
Result - Remark
Verdict
TRF No. IEC60065K
5.4
Instructions for use
English
(Version in other language will
be provided when submitted
for national approval)
(Version in other language will
be provided when submitted
for national approval)
Pass
5.4.1
a) Mains powered equipment not exposed to
dripping or splashing. Warning concerning objects
filled with liquid, etc.
dripping or splashing. Warning concerning objects
filled with liquid, etc.
Stated in user manual.
Pass
b) Hazardous live terminals, instructions for wiring
No live terminals.
N/A
c) Instructions for replacing lithium battery
No lithium battery.
N/A
d) Class I earth connection warning
N/A
e) Instructions for multimedia system connection
N/A
f) Special stability warning for attachment of the
apparatus to the floor/wall
apparatus to the floor/wall
N/A
g) Warning: battery exposure to heat
Stated in user manual.
Pass
h) Warning: protective film on CRT face
No CRT provided.
N/A
5.4.2
a-b) Disconnect device: plug/coupler or all-pole
mains switch location, accessibility and markings
mains switch location, accessibility and markings
Stated in user manual.
Pass
c) Instructions for permanently connected equipment
N/A
Marking, signal lamps or similar for completely
disconnection from the mains
disconnection from the mains
N/A
6 Hazardous
radiation
-
6.1
Ionizing radiation < 36 pA/kg (0,5 mR/h)
N/A
Ionizing radiation under fault condition
N/A
6.2
Laser radiation, emission limits to IEC 60825-1:2007
................................................................................... :
LED indicator is used, below
class 1.
class 1.
Pass
Emission limits under fault conditions ..................... :
Pass
7
Heating under normal operating conditions
-
7.1
Temperature rises not exceeding specified values;
fuse links and other protective devices defeated
fuse links and other protective devices defeated
See appended table 7.1.
Pass
7.1.1
Temperature rise of accessible parts
See appended table 7.1.
Pass
7.1.2
Temperature rise of parts providing electrical
insulation
insulation
See appended table 7.1.
Pass
7.1.3
Temperature rise of parts acting as a support or as a
mechanical barrier
mechanical barrier
See appended table 7.1.
Pass
7.1.4
Temperature rise of windings
See appended table 7.1.
Pass
7.1.5
Parts not subject to a limit under 7.1.1 to 7.1.4
See appended table 7.1.
Pass
7.2
Softening temperature of insulating material
supporting parts conductively connected to the
mains carrying a current > 0,2 A at least 150
supporting parts conductively connected to the
mains carrying a current > 0,2 A at least 150
o
C
N/A
Click on the first or last page to see other SB 26 (serv.man3) service manuals if exist.