Harman Kardon HKTS 210SUB (serv.man7) EMC - CB Certificate ▷ View online
Page 13 of 22 Report No.1021750
IEC60065
Clause
Requirement + Test
Result - Remark
Verdict
Component
Manufacturer/
trademark
Type/model
Value / rating
Standard
Approval/
Reference
Capacitor CX2
across mains
poles
Shenzhen
SuRong
Capacitors
Co., Ltd.
MPX/MKP
0.22µF X2 275V
IEC 60384-14
2:nd Ed.
Alt. Farad
Electronics
Co., Ltd.
PXK
0.22µF X2 275V
IEC 60384-14
2:nd Ed.
Alt. Europtronic(Taiw
an) IND.Corp
MPX
0.22µF X2 275V
IEC 60384-14
2:nd Ed.
Alt. Shenzhen
SuRong
Capacitors
Co.,Ltd.
MPX/MKP
0.33µF X2 275V
IEC 60384-14
2:nd Ed.
Mains switch
Chily Precision
Industrial Co.,Ltd.
3024 8/128A
250V
IEC 61058-1
16
Alt. Solteam
Electronics
Co.,Ltd.
MR-21N-
2BB-F2
6/100A 250V
IEC 61058-1
IEC 60065
cl.14.6
16
***Alt.
EnRwha Electronics
Co.,Ltd.
(Light country)
BRS-6110-4A
(R19)
6/70A
250V
IEC 61058-1
IEC 60065
cl.14.6
16
Plastic for the
BRS-6110-4A (R19)
E I Dupont De
Nemours & Co
inc.
FR7025V0F(+)
Thickness
>0.75 mm
>0.75 mm
Complies with
IEC 60707
V-0
Accepted in
appliance
***Flexible cord
set for all plugs:
Cord
I-Sheng Electric
Wire&Cable
Co.,Ltd.
H03VVH2-F
2x0.75mm
2
(300/300V)70°C
Approved for
each country
each country
Approved for each
country
***Plug EU
I-Sheng Electric
Wire&Cable
Co.,Ltd.
SP-021A
2.5A 250V
CEE 7
***Plug UK
I-Sheng Electric
Wire&Cable
Co.,Ltd.
SP62
13A 250V
BS 1363-1
Asta
***Plug CN
I-Sheng Electric
Wire&Cable
Co.,Ltd.
SP-505A
10A 250V
GB 2099.1
GB 1002
CCC
***Plug KR
I-Sheng Electric
Wire&Cable
Co.,Ltd.
SP-021A
2.5A 250V
KSC8305
K60884-1
KOREA
***Plug AU
I-Sheng Electric
Wire&Cable
Co.,Ltd.
SP-501A 7.5A
250V
AS/NZS 3112
QAS
Plastic cover
Chi Mei
Corporation
ABS 765A
Thickness 3 mm
V-0
Complies with
IEC 60695-11-10
Accepted in
appliance
* National difference for Australia
** New alternative component for T2
*** New component
** New alternative component for T2
*** New component
Page 14 of 22
Report No.1021750
IEC60065 - ATTACHMENT
Clause
Requirement + Test
Result - Remark
Verdict
National differences CHINA
IEC 60065:1998
CB Bulletin / CN 06 I
4.2.1
first sentence replaced by:
The apparatus is connected to a supply voltage of 0.9
times or 1.1 times of any RATED SUPPLY VOLTAGE
for which the apparatus is designed.
The apparatus is connected to a supply voltage of 0.9
times or 1.1 times of any RATED SUPPLY VOLTAGE
for which the apparatus is designed.
P
5.1f)
Second paragraph replaced by:
………When single rated voltage is given, it should be
marked 220 V, For a rating range, it should cover 220
V; when multiple RATED VOLTAGES are given, one of
them must be 220 V and also factory default setting
should be 220 V.
………When single rated voltage is given, it should be
marked 220 V, For a rating range, it should cover 220
V; when multiple RATED VOLTAGES are given, one of
them must be 220 V and also factory default setting
should be 220 V.
AC 220-240V
P
5.4
replaced by:
When information with regard to safety is required
according to this standard, this information shall be
given in an instruction for installation or use and
supplied with the apparatus. This information shall be
given in simplify Chinese where the apparatus is
intended to be used.
When information with regard to safety is required
according to this standard, this information shall be
given in an instruction for installation or use and
supplied with the apparatus. This information shall be
given in simplify Chinese where the apparatus is
intended to be used.
P
15.1.1
first sentence replaced by:
Plugs and appliance couplers for the connection of the
apparatus to the MAINS and socket-outlets and
interconnection couplers for providing MAINS power to
other apparatus shall comply with the Chinese National
standards, Industrial standards or relevant IEC
standards for plugs and socket-outlets, appliance
couplers or interconnection couplers.
Plugs and appliance couplers for the connection of the
apparatus to the MAINS and socket-outlets and
interconnection couplers for providing MAINS power to
other apparatus shall comply with the Chinese National
standards, Industrial standards or relevant IEC
standards for plugs and socket-outlets, appliance
couplers or interconnection couplers.
See Table 14
P
Page 15 of 22
Report No.1021750
IEC60065 - ATTACHMENT
Clause
Requirement + Test
Result - Remark
Verdict
ATTACHMENT TO TEST REPORT IEC 60065
EUROPEAN GROUP DIFFERENCES AND NATIONAL DIFFERENCES
Audio, video and similar electronic apparatus – Safety requirements
Differences according ....................: EN
EUROPEAN GROUP DIFFERENCES AND NATIONAL DIFFERENCES
Audio, video and similar electronic apparatus – Safety requirements
Differences according ....................: EN
60065:2002 + A1:2006
Attachment Form No......................: EU_GD_IEC60065J_I
Attachment Form Originator .............: Intertek Semko AB
Master Attachment Form..................: 2009-06
Copyright © 2009 IEC System for Conformity Testing and Certification of Electrical Equipment
(IECEE), Geneva, Switzerland. All rights reserved.
Attachment Form Originator .............: Intertek Semko AB
Master Attachment Form..................: 2009-06
Copyright © 2009 IEC System for Conformity Testing and Certification of Electrical Equipment
(IECEE), Geneva, Switzerland. All rights reserved.
15.1.1
UK: Apparatus which is fitted with a flexible cable or
cord and is designed to be connected to a mains
socket conforming to BS 1363 by means of that
flexible cable or cord and plug shall be fitted with a
”standard plug” in accordance with Statutory
Instrument 1768: 1994: The Plugs and Sockets etc.
(Safety) Regulations 1994, unless exempted by
those Regulations.
NOTE ”Standard plug” is defined in SI 1768:1994
and essentially means an approved plug
conforming to BS 1363 or an approved conversion
plug.
Justification
cord and is designed to be connected to a mains
socket conforming to BS 1363 by means of that
flexible cable or cord and plug shall be fitted with a
”standard plug” in accordance with Statutory
Instrument 1768: 1994: The Plugs and Sockets etc.
(Safety) Regulations 1994, unless exempted by
those Regulations.
NOTE ”Standard plug” is defined in SI 1768:1994
and essentially means an approved plug
conforming to BS 1363 or an approved conversion
plug.
Justification
: SI 1768: 1994
P
Page 16 of 22
Report No.1021750
IEC60065 - ATTACHMENT
Clause
Requirement + Test
Result - Remark
Verdict
National differences Korea
IEC 60065:2001 + A1
Information from Korea / KR 06 I I
National supply voltage are 110, 220 and 380V
220-240V
P
Only appliances having supply frequency of
60Hz or a frequency range including 60Hz are
accepted
60Hz or a frequency range including 60Hz are
accepted
P
5
Instruction manuals and marking related safety,
including name plate shall be in Korean or
graphical symbols in accordance with IEC 60417
including name plate shall be in Korean or
graphical symbols in accordance with IEC 60417
P
5.101 Addition
Other marking;
Wording “
“ ( See the CB Bulletine) or
an information regulated in IEC Publication 60417
giving high voltage warning to layman shall be
marked, if an apparatus contains a part more
than 600 volts.
giving high voltage warning to layman shall be
marked, if an apparatus contains a part more
than 600 volts.
N/A
15.1.1
Plugs for the connection of the apparatus to the
supply mains and socket outlets for providing
mains power to other apparatus shall comply with
the Korean requirements (KSC 8300 and 8305).
supply mains and socket outlets for providing
mains power to other apparatus shall comply with
the Korean requirements (KSC 8300 and 8305).
P
31
Radio frequency Interference
The apparatus shall comply with the relevant
CISPR requirements. (EMC=EMI + EMS)
CISPR requirements. (EMC=EMI + EMS)
Test Reports 1024638E and
1024638I
1024638I
P
Click on the first or last page to see other HKTS 210SUB (serv.man7) service manuals if exist.