DOWNLOAD Harman Kardon HD 950 (serv.man3) Service Manual ↓ Size: 5.44 MB | Pages: 60 in PDF or view online for FREE

 

                                                                                Page 11 of 58                        Report No. JSH006100256-002 

 

IEC/EN 60065 

Clause 

Requirement – Test 

Result - Remark 

Verdict 

 

TRF No:  IEC/EN 60065H 

 

       TRF originator Intertek ETL SEMKO SH 

 

 

14.3.4.1 

Class II transformers have adequate separation 
between hazardous live parts and accessible parts 
(double or reinforced insulation) 

TR1 basic insulation minimum 
5.0 mm between TR1 core 
and primary, Supplementary 
insulation minimum 5.0mm 
between TR1 core and 
secondary. 

Pass 

 

Coil formers and partition walls > 0,4 mm 

TR1 bobbin: 0.8mm min. 

Pass 

14.3.4.2 

Class I transformers, with basic insulation and 
protective screening only if all 7 conditions of 
14.3.4.2 are met 

Class II construction 

N/A 

14.3.4.3 

Separating transformers with at least basic 
insulation 

 

N/A 

14.3.5.1 

Class II transformers have adequate insulation 
between hazardous live parts and accessible parts 
(double or reinforced insulation) 

TR1 basic insulation minimum 
5.0 mm between TR1 core 
and primary, Supplementary 
insulation minimum 5.0mm 
between TR1 core and 
secondary.

 

Pass 

 

Coil formers and partition walls > 0,4 mm 

TR1 bobbin: 0.8mm min.

 

Pass 

14.3.5.2 

Class I transformers have adequate insulation 
between hazardous live parts and accessible 
conductive parts or those conductive parts or 
protective screens connected to a protective earth 
terminal 

Class II construction 

N/A 

 

Winding wires connected to protective earth have 
adequate current-carrying capacity 

 N/A 

14.4 

High voltage components 

No such components 

N/A 

 

High-voltage components and assemblies: 
U > 4 kV (peak) separately approved 

 

N/A 

 

Component meets category V-1 of IEC 60707 

 

N/A 

14.4.1 

High voltage transformers and multipliers tested as 
part of the submission 

 

N/A 

14.4.2 

High voltage assemblies and other parts tested as 
part of the submission 

 

N/A 

14.5 Protective 

devices 

 

Pass 

 

Protective devices used within their ratings 

 

Pass 

 

External clearances and creepage distances meet 
requirement of clause 13 for the voltage across the 
device when opened 

Fuse FU1: 3.4mm 

Pass 

14.5.1.1 

a) Thermal cut-outs separately approved 

No such components 

N/A 

 

                                                                                Page 12 of 58                        Report No. JSH006100256-002 

 

IEC/EN 60065 

Clause 

Requirement – Test 

Result - Remark 

Verdict 

 

TRF No:  IEC/EN 60065H 

 

       TRF originator Intertek ETL SEMKO SH 

 

 

 

b) Thermal cut-outs tested as part of the 
submission 

 

N/A 

14.5.1.2 

a) Thermal links separately approved 

No such components 

N/A 

 

b) Thermal links tested as part of the submission 

 

N/A 

14.5.1.3 

Thermal devices re-settable by soldering 

 

N/A 

14.5.2.1 

Fuse-links in the mains circuit according to IEC 
60127 

FU1 approved. 

Pass 

14.5.2.2 

Correct marking of fuse-links adjacent to holder ... : FU1: T1A L 250V 

Pass 

14.5.2.3 

Not possible to connect fuses in parallel  ............... : Only one fuse holder 

Pass 

14.5.2.4 

Not possible to touch hazardous live parts when 
replacing fuse-links without the use of a tool ......... :

 

 

Pass 

14.5.3 

PTC-S thermistors comply with IEC 60730-1 

No such parts 

N/A 

 

PTC-S devices (15 W) category V-1 or better 

 

N/A 

14.5.4 Circuit 

protectors 

have adequate breaking capacity 

and their position is correctly marked 

 

N/A 

14.6 Switches 

No 

switch 

N/A 

14.6.1 a) 

Separate testing to IEC 61058 including: 

10 000 operations 

Normal pollution suitability 

Resistance to heat and fire level 3 

and 

V-0 compliance with annex G, G.1.1 

         

 N/A 

14.6.1 b) 

Tested in the apparatus: 

 

N/A 

 

Switch controlling > 0.2A with open contact  
voltage > 35 V (peak)/24 V dc complying with 
14.6.3, 14.6.4 and V-0 in annex G, G.1.1 

 N/A 

 

Switch controlling > 0.2A with open contact  
voltage < 35 V (peak)/24 V dc complying with 
14.6.3 and V-0 in annex G, G.1.1 

 N/A 

 

Switch controlling < 0.2A with open contact  
voltage > 35 V (peak)/24 V dc complying with  
14.6.4 and V-0 in annex G, G.1.1 

         

 N/A 

14.6.2 

Switch tested to 14.6.1 b) constructed to IEC 
61058-1 subclause 13.1 and has making/breaking  
action independent of speed of actuation 

         

 N/A 

 

                                                                                Page 13 of 58                        Report No. JSH006100256-002 

 

IEC/EN 60065 

Clause 

Requirement – Test 

Result - Remark 

Verdict 

 

TRF No:  IEC/EN 60065H 

 

       TRF originator Intertek ETL SEMKO SH 

 

 

14.6.3 

Switch tested to 14.6.1 b) compliant with IEC 
61058-1 subclause 16.2.2 d) and  m) not attaining 
excessive temperatures in use 

         

 N/A 

14.6.4 

Switch tested to 14.6.1 b) has adequate dielectric 
strength 

         

 N/A 

14.6.5 

Mains switch controlling mains socket outlets 
additional tests to IEC 60058-1 

         

 N/A 

 

Socket outlet current marking correct 

         

 N/A 

14.7 

Safety interlocks 

No such parts 

N/A 

 

Safety interlocks to 2.8 of IEC 60950 

         

 N/A 

14.8 

Voltage setting devices 

No such parts 

N/A 

 

Voltage setting device not likely to be changed 
accidentally 

         

 N/A 

14.9 Motors 

 

N/A 

14.9.1 

Endurance test on motors 

Only low voltage DC servo 
motor in DVD loader 

N/A 

 

Motor start test 

         

 N/A 

 

Dielectric strength test 

         

 N/A 

14.9.2 

Not adversely affected by oil or grease etc. 

         

 N/A 

14.9.3 

Protection against moving parts 

         

 N/A 

14.9.4 

Motors with phase-shifting capacitors, three-phase 
motors and series motors meet clause. B.8, B.9 
and B.10 of IEC 60950, Annex B 

         

 N/A 

14.10 Batteries 

 Pass 

14.10.1 

Batteries mounted with no risk of accumulation of 
flammable gases 

Only non-rechargeable alkali 
batteries in IR remote 
controller. 

Pass 

14.10.2 

No possibility of recharging non-rechargeable 
batteries 

No recharging circuit in 
apparatus 

N/A 

14.10.3 

Recharging currents and times within 
manufacturers limits 

No recharging circuit in 
apparatus 

N/A 

 

Lithium batteries discharge and reverse currents 
within the manufacturers limits 

No lithium battery 

N/A 

14.10.4 

Battery mould stress relief 

No such battery 

N/A 

14.10.5 

Battery drop test 

No such battery 

N/A 

14.11 

Optocouplers 

Separately approved, see 
appended table 

Pass 

 

                                                                                Page 14 of 58                        Report No. JSH006100256-002 

 

IEC/EN 60065 

Clause 

Requirement – Test 

Result - Remark 

Verdict 

 

TRF No:  IEC/EN 60065H 

 

       TRF originator Intertek ETL SEMKO SH 

 

 

 

Optocouplers comply with Cl. 8 

Internal DTI >0.40mm

  

Pass 

 

Internal and external dimensions to 13.1. or 
alternatively 13.6 (jointed insulation) 

int./ext. Cl. &Cr. >4mm / 

≥6.0mm 

Pass 

14.12 

Surge suppression varistors 

VDE approved 

Pass 

 

Comply with IEC 61051-2 

 

Pass 

 

Not connected between mains and accessible 
parts except for earthed parts of permanently 
connected apparatus 

 Pass 

 

Complies with the current pulse, fire hazard and 
thermal stress requirements of 14.12 

 Pass 

 
 

15 TERMINALS 

 

15.1.1 

Mains plug, appliance inlet, interconnection 
couplers and mains socket-outlet meet the 
appropriate standard 

Mains plug approved 

Pass 

15.1.2 

Connectors for antenna, earth, audio, video or data: 

 

 

No risk of insertion in mains socket-outlets 

 

Pass 

 

No risk of insertion into audio or video: outlets 
marked with the symbol of 5.2 

 

N/A 

15.1.3 

Output terminals of a.c. adaptors or similar devices 
not compatible with household mains socket-
outlets 

         

 N/A 

15.2 

Provision for protective earthing 

 

 

Accessible conductive parts of Class I equipment 
reliably connected to earth terminal, within 
equipment 

Class II 

N/A 

 

Class I supply equipment with non-hazardous live 
output voltage: output circuit not connected to 
earth 

 

N/A 

 

Protective earth conductors correctly coloured 

 

N/A 

 

Equipment with non-detachable mains cord 
provided with separate protective earth terminal 
near mains input 

 

N/A 

 

Protective earth terminal resistant to corrosion 

 

N/A 

 

Earth resistance  test: < 0,1 

Ω at 25 A ................... :  

N/A 

15.3 

Terminals for external flexible cords and for 
permanent connection to the mains supply 

 Pass