DOWNLOAD Harman Kardon GO AND PLAY (serv.man4) Service Manual ↓ Size: 2.46 MB | Pages: 127 in PDF or view online for FREE

Model
GO AND PLAY (serv.man4)
Pages
127
Size
2.46 MB
Type
PDF
Document
EMC - CB Certificate
Brand
Device
Audio
File
go-and-play-sm4.pdf
Date

Harman Kardon GO AND PLAY (serv.man4) EMC - CB Certificate ▷ View online

IEC 60950-1 (ed.1) 
 - 
Page 
1
 of 
1
 - 
 
 
 
www.nemko.com 
Report No.   70512 
 
ATTACHMENT: ISRAELI DIFFERENCES 
to IEC 60950-1 (ed.1) 
 
Clause 
Requirements – Test 
Result – Remark 
Verdict 
1.7.0 
Marking and Instructions 
 
The package of the equipment shall be marked in 
Hebrew, and shall include: 
- The name of the product, 
- The name of the manufacturer, 
- The country of production, 
- The name and the address of the importer. 
 
The marking shall be on a rectangular label (of at 
least 52mm x 24mm). The letters height should be 
at least 2mm. The color of the label shall be in 
contrast to the color of the package. 
Class III equipment. 
N/A 
1.7.12 Language 
 
All instructions and warnings concerning safety 
should be in the Hebrew language as well. 
Must be considered before 
marketing in Israel. 
 
2.101 EMC 
 
The equipment shall comply with SI 961 part 6 
(CISPR 22 + 24). 
Must be considered before 
marketing in Israel. 
 
3.2.1.1 
Connection to an a.c. mains supply 
 
Additional note: 
In Israel the mains supply plug shall comply with 
Israeli standard SI 32. 
Class III equipment. 
N/A 
 
 
IEC 60950-1 (ed.1) 
 
Page 1 of 2 
 
 
www.nemko.com 
Report No.   70512 
 
ATTACHMENT: SINGAPORE DIFFERENCES 
to IEC 60950-1 (ed.1) 
 
 
No  Item  
Requirement 
Result - Remark 
Ver-
dict 
The following is the national differences in accordance with safety authority website 
www.safety.org.sg/
  , ref. Singapore Consumer Protection (Safety Requirements) - Information 
booklet - chapter 7 (page 21 - 24). Based on information by Singapore NCB – PSB Corp.
 
7 SAFETY AUTHORITY’S REQUIREMENTS
 
The Safety Authority monitors the safety of the controlled goods sold in Singapore by 
investigating all complaints, incidents and accidents reported to the authority. Experiences 
gained are translated into the Safety Authority’s Requirements. These requirements are to be 
fulfilled in addition to the applicable safety standards.
 
Applicable to all electrical products 
All appliances 
All appliances must be tested to 230 
VAC. 
Class III equipment. 
N/A 
Voltage selector 
(voltage mis-
match test) 
Appliance fitted with voltage selector 
shall be tested as follows: 
Connect appliance to 230 VAC mains 
with voltage selector switch to settings 
not suitable for operation at 230 VAC. 
Class III equipment. 
N/A 
Tropical condition 
test 
All appliances (with tropical test 
requirements in applicable Standards) 
shall comply with the tropical condition 
test as stated in the relevant IEC 
Standards. 
Under tropical conditions the duration of 
the humidity conditioning is 5 days 
(120h) at a temperature (t) of 40°C 
± 
2°C with a relative humidity of 90% to 
95%. 
Class III equipment, no 
test performed. 
N/A 
Class I 
appliances  
(3-pin mains 
plug) 
All Class I appliances must be fitted with 
3-pin mains plugs
 
complied with SS 
145/SS 472 that are registered with the 
Safety Authority.  
Class III equipment. 
N/A 
Class II 
appliances 
(mains plug) 
a) All Class II appliances must be fitted 
with 2-pin mains plug (Appendix W) 
complied with IEC 83: 1975 (Standard 
C5, Version II) or EN 50075: 1991.   
b) Class II appliances that are fitted with 
3-pin mains plugs must use plugs that 
are complied with SS 145 and 
registered with the Safety Authority. 
Class III equipment. 
N/A 
IEC 60950-1 (ed.1) 
 - 
Page 
2
 of 
2
 - 
 
 
www.nemko.com 
Report No.   70512 
 
No 
Item  
Requirement 
Result - Remark 
Ver-
dict 
Appliances rated 
≥ 3 kW or 
connected to 
fixed wiring 
Electric appliance 
≥ 3 kW must be 
connected to fixed wiring. All connection to 
fixed wiring must be in accordance with 
Code of Practice CP5. 
Considered. 
N/A 
8 
Detachable 
power cord set 
(consists of 
mains plug, 
mains cord and 
appliance 
connector 
Detachable power cord set must be 
listed in the test report critical 
component list. 
Class III equipment. 
N/A 
Circuit diagrams 
Circuit diagrams must be indicated with 
component’s values for products tested 
to IEC 60065 and IEC 60950. 
Must be considered 
before marketing in 
Singapore. 
N/A 
10 
Circuit diagrams 
of electronic 
modules in 
electrical 
appliances 
Circuit diagrams of the electronic 
modules in the electrical appliances 
must be provided. 
Must be considered 
before marketing in 
Singapore. 
N/A 
11 
Controlled goods 
likely to be 
treated as toy by 
children 
Controlled goods, having an enclosure, 
which is shaped and decorated so that it 
is likely to be treated as a toy by 
children, shall not be accepted for 
certification and registration. 
 
N/A 
Applicable to AC adaptor 
13 
3-pin AC adaptor 
Test report showing that the 3-pin 
complied with sub-clauses 12.1 & 12.3 
of SS 246 must be submitted. 
Class III equipment. 
N/A 
14 
2-pin AC adaptor 
The 2-pin (Appendix W) shall comply 
with IEC 83: 1975 (Standard C5, 
Version II) or EN 50075 
Class III equipment. 
N/A 
15 
Detachable 
power supply 
cord set not 
supplied by 
Registered 
Supplier 
Registered Supplier who is not 
supplying the detachable power supply 
cord set together with the AC Adaptor 
must provide written instruction to its 
customer on the type of approved 
detachable power cord set to use. 
Must be considered 
before marketing in 
Singapore. 
N/A 
Applicable to computer products 
16 
CD/DVD ROM 
(used in personal 
computer) 
Test certificate showing that CD/DVD 
ROM has complied with IEC 825 must 
be provided. 
No lasers. 
N/A 
17 
Modem Card 
(used in personal 
computer) 
Modem card incorporated in the 
personal computer must be tested at set 
level (sub-clauses 5.1 & 6 of IEC 60950) 
or at component level. 
No TNV provided. 
N/A 
 
Page of 127
Display

Click on the first or last page to see other GO AND PLAY (serv.man4) service manuals if exist.