Harman Kardon FL 8300 (serv.man12) User Manual / Operation Manual ▷ View online
ENGLISH
CONCERNING
USE OF BATTERIES
USE OF BATTERIES
• Open the cover by sliding it as
shown.
• Insert two size “AA” (R6) batteries,
matching the polarity, and close
the cover.
the cover.
NOTE:
1. Replace them with two new
batteries when the remote control
does not operate the unit.
batteries when the remote control
does not operate the unit.
2. Remove the batteries if it is not to
be used for an extended period of
time.
be used for an extended period of
time.
3. Do not use rechargeable batteries
(Ni-Cd type).
(Ni-Cd type).
14
Power
4
5
Disc Skip
Program/Review Random
Repeat
Edit
Time
Intro
Delete
Tape Size
Open/Close
FL8300
harman/kardon
1
2
3
Phones
Remote Sensor
PROGRAM
RANDOM
REPEAT ALL 1 DISC 8
1
2
3
4
5
DELETE
A.SPACE
INTRO
TRACK
MIN
SEC
AUTO EDIT
AB
A
Headphones
A B
AUTO
EDIT
1 2 3 4 5
6 7 8 9 10
11 12 13 14 15
16 17 18 19
C O M P A C T
D I G I T A L A U D I O
7 m
30°
30°
DISPLAY
TIME
1/ALL
A B
RANDOM
DELETE
INTRO
PROG/REV TAPE SIZE
EDIT
9
0
5
6
7
8
1
2
3
4
harman/kardon
Compact Disc Changer
REPEAT
DISC
➞
FL8300 Engelsk
12/01/98, 16:38
17
ENGLISH
15
Troubleshooting Guide
Although the greatest care has been
taken in the manufacturing of this
unit, the possibility remains that a
fault could appear or that for some
reason the unit could fail to function
to your complete satisfaction.
taken in the manufacturing of this
unit, the possibility remains that a
fault could appear or that for some
reason the unit could fail to function
to your complete satisfaction.
The cause, however, will not always
be found in the unit itself. External
factors and the fact that it takes time
to become accustomed to the whole
concept of the new product and the
new discs, can also play a role.
be found in the unit itself. External
factors and the fact that it takes time
to become accustomed to the whole
concept of the new product and the
new discs, can also play a role.
To save unnecessary calls on your
dealer or our Service Organization,
we have compiled a list of possible
faults and their causes. To even
mention some of these causes, such
as those to do with power
connection, may seem excessive.
Our experience shows, however, that
they are easily overlooked as
sources of trouble. If, by using this
list, you do not succeed in solving
the problem, stop your investigation.
Disconnect the AC cord and contact
your dealer.
dealer or our Service Organization,
we have compiled a list of possible
faults and their causes. To even
mention some of these causes, such
as those to do with power
connection, may seem excessive.
Our experience shows, however, that
they are easily overlooked as
sources of trouble. If, by using this
list, you do not succeed in solving
the problem, stop your investigation.
Disconnect the AC cord and contact
your dealer.
Under no circumstances should you
open up the unit. If you should, this
will invalidate all your rights under
the warranty.
open up the unit. If you should, this
will invalidate all your rights under
the warranty.
NOTE:
If the faults relating to the power or
the connections arise when the unit
is a part of a system, check your
operating instructions for the
amplifier of the system.
the connections arise when the unit
is a part of a system, check your
operating instructions for the
amplifier of the system.
1. AFTER PRESSING
THE POWER SWITCH,
THE DISPLAY IS NOT ON OR THE
CAROUSEL DOES NOT ROTATE.
THE POWER SWITCH,
THE DISPLAY IS NOT ON OR THE
CAROUSEL DOES NOT ROTATE.
• The POWER switch is not pressed
completely.
• One of the plugs of the AC input
cord is not connected or is not
making contact.
making contact.
• There is no supply at the AC
outlet. Plug in another electrical
appliance to check if the AC outlet
functions.
appliance to check if the AC outlet
functions.
2. DISC IS LOADED
BUT PLAY DOES NOT START
BUT PLAY DOES NOT START
• The disc is not loaded with the
labelled side up.
• The disc is dirty. See if cleaning
the disc or using another clean
disc clears the fault.
disc clears the fault.
• The disc is defective. Try another
disc and see if that clears the
fault.
fault.
• There is an unwanted object such
as a piece of paper or a remnant
of packaging in the tray.
of packaging in the tray.
3. THE DISC PLAYED
AND THE TRACK NUMBER
AND THE ELAPSED TIME
INDICATORS FUNCTION WELL,
BUT THERE IS NO SOUND.
AND THE TRACK NUMBER
AND THE ELAPSED TIME
INDICATORS FUNCTION WELL,
BUT THERE IS NO SOUND.
• The amplifier is not turned on.
• The position of the amplifier
source selector does not corre-
spond with the input to which the
unit is connected.
spond with the input to which the
unit is connected.
• The amplifier or the speakers
connected to it are not working.
Check it with another sound
source to see if this is the case.
Check it with another sound
source to see if this is the case.
• The microprocessor has not
received the command correctly.
Turn the unit off and on again and
then try restarting to see if that
clears the fault.
Turn the unit off and on again and
then try restarting to see if that
clears the fault.
• The unit is not connected to the
amplifier correctly.
• The input to which the unit is
connected is defective. Check it
by connecting the unit to another
input jack.
by connecting the unit to another
input jack.
4. THE SOUND IS POOR
OR DISTORTED OR YOU
CAN HEAR ONLY ONE CHANNEL.
OR DISTORTED OR YOU
CAN HEAR ONLY ONE CHANNEL.
• The unit is not connected to the
CD or AUX input of the amplifier
but to the PHONO input.
but to the PHONO input.
• One of the plugs of the connection
cords is either not connected or
not properly connected.
not properly connected.
• The amplifier or the speakers
connected to it are not working
properly. Check it with another
sound source to see if this is the
case.
properly. Check it with another
sound source to see if this is the
case.
5. PROGRAMMING
IS NOT WORKING.
IS NOT WORKING.
• The microprocessor has not
processed the commands prop-
erly. Clear the program by
pressing the OPEN/CLOSE button
or the STOP/CLEAR button over 4
seconds. Try to program again,
restart play and check if the fault
is cleared.
erly. Clear the program by
pressing the OPEN/CLOSE button
or the STOP/CLEAR button over 4
seconds. Try to program again,
restart play and check if the fault
is cleared.
• The memory was already full of 32
selections and you missed the
“FULL” sign that indicated it.
Check it with the PROGRAM/
REVIEW button.
“FULL” sign that indicated it.
Check it with the PROGRAM/
REVIEW button.
FL8300 Engelsk
12/01/98, 16:38
18
ENGLISH
16
• TYPICAL AUDIO PERFORMANCES
Number of Channels
2
Frequency Range
20-20,000 Hz
±
0.2 dB
Signal to Noise Ratio
More than 104 dB
Dynamic Range
More than 94 dB
Total Harmonic Distortion
Less than 0.05% at 1kHz
Audio Output Level
2 Volts RMS
• OPTICAL READOUT SYSTEM
LASER
Semiconductor AlGaAs
Wave Length
760 - 800 nm
Numerical Aperture
0.45
• SIGNAL FORMAT
Sampling Frequency
44.1 kHz
D/A Conversion
Dual 1 Bit
Oversampling
8 times
• GENERAL
Power Supply Voltage
230 V, 50 Hz
Power Consumption
MAX. 12 Watts
Dimension (W
×
H
×
D)
440
×
95
×
380 mm
Weight
6.5 Kg (14.5 lbs)
• DISC
Diameter
120 mm/80 mm
Thickness
1.2 mm
Rotation Speed
500 - 200 rpm
Playing Time (Theoretical)
74 min. (stereo)
Track Pitch
1.6 um
Note: Specifications and features are subject to change without notice.
Specifications FL8300
Kongevejen 194B
DK-3460 Birkerød
Danemark
Danemark
We, Harman Marketing Europe a/s
Steen Michaelsen
harman marketing europe a/s
DECLARATION OF CONFORMITY
declare that the product described in
this owner's manual is in compliance
with technical standards:
Accredited test laboratory:
MIKES PRODUCT SERVICE GmbH
Ohmstrasse 2-4
D-94342 Strasskirchen
Germany
The appliance conforms with EEC directive
87/308/EEC regarding interference suppression
EN 55013/6.1990. EN 55020/6.1988.
EN 55022/4.1987.
EN 55022/4.1987.
FL8300 Engelsk
12/01/98, 16:38
19
ENGLISH
16
• TYPICAL AUDIO PERFORMANCES
Number of Channels
2
Frequency Range
20-20,000 Hz
±
0.2 dB
Signal to Noise Ratio
More than 104 dB
Dynamic Range
More than 94 dB
Total Harmonic Distortion
Less than 0.05% at 1kHz
Audio Output Level
2 Volts RMS
• OPTICAL READOUT SYSTEM
LASER
Semiconductor AlGaAs
Wave Length
760 - 800 nm
Numerical Aperture
0.45
• SIGNAL FORMAT
Sampling Frequency
44.1 kHz
D/A Conversion
Dual 1 Bit
Oversampling
8 times
• GENERAL
Power Supply Voltage
230 V, 50 Hz
Power Consumption
MAX. 12 Watts
Dimension (W
×
H
×
D)
440
×
95
×
380 mm
Weight
6.5 Kg (14.5 lbs)
• DISC
Diameter
120 mm/80 mm
Thickness
1.2 mm
Rotation Speed
500 - 200 rpm
Playing Time (Theoretical)
74 min. (stereo)
Track Pitch
1.6 um
Note: Specifications and features are subject to change without notice.
Specifications FL8300
Kongevejen 194B
DK-3460 Birkerød
Danemark
Danemark
We, Harman Marketing Europe a/s
Steen Michaelsen
harman marketing europe a/s
DECLARATION OF CONFORMITY
declare that the product described in
this owner's manual is in compliance
with technical standards:
Accredited test laboratory:
MIKES PRODUCT SERVICE GmbH
Ohmstrasse 2-4
D-94342 Strasskirchen
Germany
The appliance conforms with EEC directive
87/308/EEC regarding interference suppression
EN 55013/6.1990. EN 55020/6.1988.
EN 55022/4.1987.
EN 55022/4.1987.
FL8300 Engelsk
12/01/98, 16:38
19
