DOWNLOAD Harman Kardon FL 8300 (serv.man12) Service Manual ↓ Size: 350.8 KB | Pages: 19 in PDF or view online for FREE

ENGLISH

This button is used for replaying
from the beginning of the current
track, returning to a previous track or
searching for a particular passage in
fast reverse.

This button is used for moving on to
the next track or searching for a
particular passage in fast forward.

This button is used for repeating one
track, one disc or all discs.

This button is used to let the unit
automatically select and play tracks
randomly on each CD or randomly
between discs and tracks.

Press the POWER switch to turn this
unit on and press it again to turn it
off.  For system operation, plug the
AC input cord into the switched AC
outlet, keep the power switch ON
and control power ON/OFF with the
main POWER switch on the amplifier
or receiver.

This display shows the
corresponding information according
to each mode.

One disc per tray can be loaded with
the labelled side up.

This button is used for starting play,
pausing play at the beginning of a
track or interrupting play.

This button is used for stopping play,
clearing programmed selections or
recovering the deleted selections.

6

This button is used for checking the
elapsed playing time from the
beginning of the current track,
remaining playing time of the current
track or remaining playing time of the
disc.

This button is used for deleting the
undesired tracks or discs.

These buttons are used for selecting
the disc to be played.

Each time this button is pressed to
load or unload the disc, the carousel
will rotate to the next tray position
clockwise.

This receives the infrared signals
transmitted by the remote control
and converts it into the electrical
signal to control this unit.

This button is used for selecting the
tape length.

This button is used for editing the
tracks to be recorded onto the
cassette tape.

This button is used for playing  the
first 10 seconds of each track or the
first track on CDs.

This button is used for opening and
closing the tray.

This button is used for programming
your favorite tracks or discs or
reviewing the programmed
selections.

This is used for listening with
headphones.

FL8300 Engelsk

12/01/98, 16:37

9

ENGLISH

• If a track is playing, press the

BACKWARD SKIP button (       ) to
return to the beginning of the
track.

• Press the BACKWARD SKIP

button before a track begins
playing to move to the beginning
of the previous track.

• During normal or deleted play,

etc., if the BACKWARD SKIP
button is pressed at the beginning
of the first track on a CD, the first
track is skipped to the last track
on that CD.

• During random or programmed

play, etc., the BACKWARD SKIP
button can be pressed only to
return to the beginning of a track
or the first programmed track.

• To start play from a disc among

five discs, press the button that
corresponds to the desired disc,
then continuous play starts from
the first track of the desired disc
without the PLAY/PAUSE button.

• Open the tray to replace discs,

other than the disc being played.

• Close the tray.

• Press the FORWARD SKIP button

(       ) to advance to the beginning
of the next track.

• During normal or deleted play,

etc., if the FORWARD SKIP button
is pressed when playing the last
track on a CD, the last track is
skipped to the first track on that
CD.

• During random or programmed

play, etc., if the FORWARD SKIP
button is pressed when playing
the last track, the “End” sign
appears on the display and the
last track continues to be played.

• In continuous play mode, the unit

plays from the first track on the
first disc to the final track on the
fifth disc.

1. Press the POWER switch.

• The carousel will rotate to see

where the CD is.

2. Open the tray.

3. Load the disc(s) on the tray(s) with

the labelled side up.

• For loading a disc in the 5th tray,

press the DISC SKIP button.

4. Close the tray.

• To avoid damage, do not insert

any objects into the tray.

• To prevent dirt and dust from

entering the mechanism, do not
leave the tray open when not in
use.

5. Press the PLAY/PAUSE button.

• Continuous play starts from the

tray on which a CD is loaded.

7

1

2

3

4

5

TRACK

MIN

SEC

STOP MODE

1      2      3      4       5

6      7      8      9      10

11    12   13    14

3

4

5

1

2

3

4

5

MIN

SEC

1      2      3      4      5

6      7      8      9     10

11    12   

TRACK

An 

→

 at the END of the music

calendar indicates that the disc
contains more than 19 tracks.

• After the last track on the 5th disc

has been played, the unit switches
to stop mode.

• Press the PLAY/PAUSE button to

temporarily interrupt play. The
sound stops and II appears on the
display.

• To resume, press the PLAY/

PAUSE button again.

• Press the STOP/CLEAR button to

stop play before the end of the
last disc is reached.

1

2

3

4

5

TRACK

MIN

SEC

:

PAUSE MODE

6      7      8      9      10

11    12   

FL8300 Engelsk

12/01/98, 16:37

10

ENGLISH

You can program up to 32 selections
to play in any sequence you choose.
If you exceed 32 selections, the
“FULL” sign appears to remind you
that memory is full and cannot
accept any more selections.

1. In stop mode, press the
PROGRAM/REVIEW button (on the
remote control).

2. Select the desired disc with the
DISC SELECTOR or DISC SKIP
button(s).

Example: When you select the first
disc.

• If the PROGRAM/REVIEW button
is pressed without selecting a track,
the selected disc is programmed as
one selection.

1. Repeatedly press the FORWARD
or BACKWARD SKIP button
(               ) until the desired track
number appears on the display.

2. Press the PLAY/PAUSE button

• Press and hold down the FOR-

WARD or BACKWARD SEARCH
button (               ). The sound level
is decreased by 1/4 (12dB)
compared with the normal level.

• Release the button when the

desired point has been reached.

• If the unit reaches the end of a CD

during forward search in normal or
deleted play mode, etc., it starts
play at the beginning of the next
CD.

8

1

2

3

4

5

TRACK

MIN

SEC

                        4      5

6      7      8      9     10

11    12   13    14    15

16    17   18    19   

PROGRAM

1

1

2

3

4

5

TRACK

1      2      3      4      5

6      7      8      9     10

11    12   13    14    15

16    17   18    19   

PROGRAM

1

2

3

4

5

TRACK

MIN

SEC

• Before or during play, select the

desired CD with the DISC SELEC-
TOR buttons and press the
REPEAT button twice, then
REPEAT 1 DISC appears on the
display and only the selected CD
is played repeatedly.

• During programmed play,

REPEAT 1 DISC play is not
operative.

• Press the REPEAT button three

times,  then press the PLAY/
PAUSE button.

• Then REPEAT ALL DISCS appears

on the display and all discs are
played repeatedly.

• If the REPEAT button is pressed

once more in REPEAT ALL DISCS
play mode, repeat play mode is
cancelled.

• If the unit reaches the end during

forward search, it switches to stop
mode.

• If the unit reaches the beginning of

a CD during backward search in
normal or deleted play mode, etc.,
play restarts at this point.

• If the unit reaches the beginning of

a track during backward search in
random or programmed play
mode, etc., play restarts at this
point.

• Select the desired track with the

FORWARD or BACKWARD SKIP
button and press the REPEAT
button. Then press the PLAY/
PAUSE button to play the track.

• Then REPEAT 1 appears on the

display and only the selected
track is played repeatedly.

• During random or disc intro play,

REPEAT 1 TRACK play is not
operative.

FL8300 Engelsk

12/01/98, 16:37

11

ENGLISH

6.  Press the PLAY/PAUSE button.

• If you want continuous play

without clearing your programmed
selection during programmed
play, select the desired disc with
the DISC SELECTOR or DISC
SKIP button(s) then continuous
play starts from the first track of
that disc.

• If you want programmed play

again, press the PROGRAM/
REVIEW button in stop mode,
then the unit switches to program
mode.

You can check the programmed
selections during programming or
after completion of the program.

• Each time the PROGRAM/REVIEW

button is pressed, the
programmed selections will
appear in the programmed
sequence.

When you made a mistake and
programmed the wrong selection,
you can rectify it as follows.

Example: When tracks 3, 4 and 7 of
the first disc are programmed, if you
want to program track 7 of the 5th
disc instead of track 4 of the first
disc:

1. Find track 4 of the first disc with
the PROGRAM/REVIEW button by
continuing to press the review button
until that selection appears on the
display.

2. Select your desired disc with the
DISC SELECTOR or DISC SKIP
button(s).

Only the number that corresponds to
that disc appears.

3. Select your desired track with the
FORWARD or BACKWARD SKIP
button.

9

4. Press the PROGRAM/REVIEW
button.

• Each time the STOP/CLEAR

button is pressed during program-
ming or after completion of
programming, the programmed
selections are cleared one by one
in the opposite sequence.

• If you want to clear a specific

selection, find that selection with
the PROGRAM/REVIEW button
and clear it with the STOP/CLEAR
button.

• By pressing the OPEN/CLOSE or

STOP/CLEAR button over 4
seconds in stop mode, all pro-
grammed selections will be
cleared.

PROGRAM

1

2

3

4

5

TRACK

MIN

SEC

:

                        4      

            7          9     

11

PROGRAM

1

                3           5      

         7      

TRACK

SEC

PROGRAM

5

PROGRAM

5

TRACK

7 

PROGRAM

1

2

3

4

5

TRACK

                3     

       7

SEC

PROGRAM

5

TRACK

7

SEC

PROGRAM

5

TRACK

7

SEC

MIN

After a few seconds

After a few seconds

3.  Select the track with the FOR-
WARD or BACKWARD SKIP button.

Example: When you select the 4th
track.

• When the track of the current disc

is selected, the track can be
selected directly without selecting
the disc.

4. Press the PROGRAM/REVIEW

button.

• Because it is impossible to know

the playing time of each selection
from five discs, --:-- can appear
on the time display.

• 5.  Repeat steps 2, 3 and 4 to

complete programming.

PROGRAM

1

TRACK

4

PROGRAM

PROGRAM

1

1

TRACK

TRACK

MIN

MIN

SEC

SEC

After about 1 second

                       4

                                  4     

1

2

3

4

5

TRACK

MIN

SEC

:

After a few seconds

                            4

After about 1 second

FL8300 Engelsk

12/01/98, 16:38

12