DOWNLOAD Harman Kardon FL 8300 (serv.man9) Service Manual ↓ Size: 197.65 KB | Pages: 2 in PDF or view online for FREE

Model
FL 8300 (serv.man9)
Pages
2 Few pages! See other manuals at the bottom of the first or last page.
Size
197.65 KB
Type
PDF
Document
Service Manual / Technical Bulletin
Brand
Device
Audio
File
fl-8300-sm9.pdf
Date

Harman Kardon FL 8300 (serv.man9) Service Manual / Technical Bulletin ▷ View online

              harman/kardon Incorporated   80 Crossways Park West, Woodbury New York 11797 (516) 496-3400
 
 
harman/kardon          
 
 
Service Bulletin
 
 
 
Service bulletin #  9703   June 1997   
 
 
 
Warranty labor rate: MAJOR repair 
 
 To: 
All harman/kardon Service Centers 
 
 Models:  FL8300 
 
 Subject:  Dead unit, no display;  Service upgrade 
 
 
 
In the event you receive an FL8300 that is dead, and upon inspection R701 is damaged or an otherwise 
open circuit, perform the necessary steps listed below: 
 
 
Due to current surges, early models of the FL8300 could repeatedly damage R701 (either a 1 ohm resistor or 
1.5A micro fuse depending on version).  Along with the replacement of R701, the positive lead should be 
relocated on C125 to suppress any future current surges. 
 
Additionally, two capacitors, now designated as C907 & C908, (1uf/50v) should be added to the power supply 
output pins on regulator IC108 & IC111 on a unit serviced for any reason; these will add stability to help prevent 
oscillation.   
 
PROCEDURE:  
 
1)   Replace R701 with micro-fuse H/K # 5508722221, this component is on PCB7. 
2)   A PCB trace should be cut on the C125 (2200 uf/25v) positive lead on the main circuit board and an insulated 
jumper wire attached from that lead to the junction of D109/110.  Additionally another insulated jumper will 
need to replace the trace that was cut. (see drawing) 
3)   Add C907 & 908, 1uf/50v , H/K/ # 3479310971, one on each output pin to ground on regulators IC108 and 
IC111.  This is most easily accomplished by: 
     Soldering one 1uf cap to the jumpers 153 & 197.  Observe polarity; J153 is ground. 
     Soldering one 1uf cap to the jumpers 185 & 186.  Observe polarity; J186 is ground. 
 
 
      Model 
Serial number 
120V 
Serial number 
230V 
Action 
Correction 
FL8300 
 
IN0019-72213 
and below 
NOT REQUIRED 
R701 is damaged or 
an open circuit 
Replace R701, 
re-route positive connection 
on C125, 
Add C907/908 
FL8300 
 
IN0019-72214 
and above 
NOT REQUIRED 
Modified by factory 
NONE REQUIRED 
 
 
 
 
 
 
              harman/kardon Incorporated   80 Crossways Park West, Woodbury New York 11797 (516) 496-3400
 
 
Display

Harman Kardon FL 8300 (serv.man9) Service Manual / Technical Bulletin ▷ Download

  • DOWNLOAD Harman Kardon FL 8300 (serv.man9) Service Manual ↓ Size: 197.65 KB | Pages: 2 in PDF or view online for FREE
  • Here you can View online or download the Service Manual / Technical Bulletin for the Harman Kardon FL 8300 (serv.man9) in PDF for free, which will help you to disassemble, recover, fix and repair Harman Kardon FL 8300 (serv.man9) Audio. Information contained in Harman Kardon FL 8300 (serv.man9) Service Manual / Technical Bulletin (repair manual) includes:
  • Disassembly, troubleshooting, maintenance, adjustment, installation and setup instructions.
  • Schematics, Circuit, Wiring and Block diagrams.
  • Printed wiring boards (PWB) and printed circuit boards (PCB).
  • Exploded View and Parts List.