Harman Kardon DVD 30 EMC - CB Certificate ▷ View online
Page 1 (14)
Date of issue: 12 June, 2003
Tested by:
Tested by:
Approved by:
Jörgen Wahlström
Anna Eriksson
Laboratories are accredited by the Swedish Board for Accreditation and Conformity Assessment (SWEDAC) under the terms of the Swedish legislation.
The accredited laboratory activities meet the requirements in SS-EN ISO/IEC 17025 (2000).
This report may not be reproduced other than in full, except with the prior written approval of the issuing laboratory.
The accredited laboratory activities meet the requirements in SS-EN ISO/IEC 17025 (2000).
This report may not be reproduced other than in full, except with the prior written approval of the issuing laboratory.
Postal address
Visiting address
Telephone
SEMKO AB
+ 46 8 750 00 00
Box 1103
Torshamnsgatan 43
S-164 22 KISTA
KISTA-STOCKHOLM
Fax
SWEDEN
SWEDEN
+ 46 8 750 60 30
EMC TEST REPORT
No. 305945E
Emission of electromagnetic disturbances
EQUIPMENT UNDER TEST
Equipment :
DVD Player
Type / model :
DVD 30
Manufacturer :
Harman Consumer Group
Tested by request of :
Harman Consumer Group
SUMMARY
The equipment complies with the requirements according to the following standards:
EN 55 013 (2001)*
EN 61000-3-2 (2000)
EN 61000-3-3 (1995) and A1(2001)
* The test of disturbance radiation in the frequency range 30-80 MHz is not within the scope of the
accreditation.
accreditation.
Test report no. 305945E
Page 2 (14)
CONTENTS
Page
1.Client information ................................................................................................................................3
2.Equipment under test (EUT) ................................................................................................................3
2.1 Identification of the EUT ..........................................................................................................3
2.2 Additional information about the EUT .....................................................................................3
3.Test specifications................................................................................................................................4
3.1 Standards...................................................................................................................................4
3.2 Additions, deviations and exclusions from standards and accreditation ...................................4
3.3 Mode of operation during the test .............................................................................................4
4.Test summary.......................................................................................................................................4
5. Mains terminal continuous disturbance voltage..................................................................................5
5.1 Operating environment..............................................................................................................5
5.2 Test set-up and test procedure...................................................................................................5
5.3 Measurement uncertainty ..........................................................................................................6
5.4 Test equipment ..........................................................................................................................6
5.5 Test protocol..............................................................................................................................7
6. Continuous disturbance power............................................................................................................8
6.1 Operating environment..............................................................................................................8
6.2 Test set-up and test procedure...................................................................................................8
6.3 Measurement uncertainty ..........................................................................................................8
6.4 Test equipment ..........................................................................................................................8
6.5 Test protocol..............................................................................................................................9
7. Disturbance radiation due to all other sources ..................................................................................10
7.1 Operating environment............................................................................................................10
7.2 Test set-up and test procedure.................................................................................................10
7.3 Measurement uncertainty ........................................................................................................11
7.4 Test equipment ........................................................................................................................11
7.5 Test protocol............................................................................................................................12
8. Harmonics, EN 61 000-3-2 ...............................................................................................................14
9. Voltage fluctuations - flicker, EN 61 000-3-3...................................................................................14
Test report no. 305945E
Page 3 (14)
1. CLIENT
INFORMATION
The EUT has been tested by request of:
Company:
Harman Consumer Group
250 Crossways Park Drive
Woodbury, NY 11797-2015
USA
250 Crossways Park Drive
Woodbury, NY 11797-2015
USA
Name of contact:
Peter Philips
Telephone:
+1 516 682 6460
Telefax:
+1 516 682 3513
2. EQUIPMENT UNDER TEST (EUT)
2.1 Identification of the EUT
Equipment: DVD
Player
Type/model: DVD
30
Brand name:
harman/kardon
Serial number:
-
Manufacturer: Harman Consumer Group
Country of origin:
USA
Rating:
100-240V AC, 50/60Hz, 20W
Class II
Class II
2.2 Additional information about the EUT
The EUT consists of the following units:
Unit Type
DVD Player
DVD 30
Remote Control
DVD 30
Test report no. 305945E
Page 4 (14)
3. TEST
SPECIFICATIONS
3.1 Standards
EN 55 013 (2001): Sound and television broadcast receivers and associated equipment – Radio disturbance
characteristics - Limits and methods of measurement.
EN 61 000-3-2 (2000): Limits for harmonic current emissions (equipment input current
≤ 16 A).
EN 61 000-3-3 (1995) and Amendment A1 (2001): Limitation of voltage fluctuations and flicker in low-
voltage supply systems for equipment with rated current
≤ 16A.
3.2 Additions, deviations and exclusions from standards and accreditation
No additions, deviations or exclusions have been made from standard.
All tests performed are within the scope of the accreditation, except the test of disturbance radiation in the
frequency range 30-80 MHz.
3.3 Mode of operation during the test
During the test the EUT was operating in the following mode:
The DVD-player was playing a test DVD disc.
The infrared remote control was activated during test of disturbance radiation due to all other sources.
4. TEST
SUMMARY
The results in this report apply only to the tested sample:
Result
Note
Mains terminal continuous disturbance voltage
Pass
Continuous disturbance power
Pass
Antenna terminal disturbance voltage
-
Not Applicable
Disturbance radiation due to the local oscillator at
its fundamental and harmonic frequencies
its fundamental and harmonic frequencies
- Not
Applicable
Disturbance radiation due to all other sources
Pass
Harmonics Pass
Voltage fluctuations - Flicker
Pass
Click on the first or last page to see other DVD 30 service manuals if exist.