Harman Kardon AVR 170 EMC - CB Certificate ▷ View online
Page 5 of 5
Report No.: 209462
ATTACHMENT 4
Clause
Requirement + Test
Result - Remark
Verdict
TRF No. IEC60065K
Applicable to multiway adaptor
36
Multiway
adaptor with 3-
pin socket-
outlets or
combination of
3-pin and 2-pin
socket-outlets
adaptor with 3-
pin socket-
outlets or
combination of
3-pin and 2-pin
socket-outlets
a) The socket contacts of the
adaptor shall only accept 13A 3-pin
mains plug complying with SS 145
and/or 2.5A 2-pin mains plug
complying with EN 50075.
b) The shutters screening the
current-carrying socket contacts
shall not be opened by the insertion
of any corresponding SINGLE pin
of the plug into any current-carrying
socket aperture.
c) A barrier or other acceptable
means shall be provided on the
engagement surface of the 2.5A 2-
pin socket-outlet of the adaptor to
PREVENT entry of any types of 2-
pin mains plugs except those
complying with EN 50075. (note:
shutters cannot be regarded as
barriers)
d) Adaptor incorporates with switch
would require additional test to sub-
clauses 13.11, 17.1.3 and 18.1.3 of
SS 145: Part 2: 1997.
adaptor shall only accept 13A 3-pin
mains plug complying with SS 145
and/or 2.5A 2-pin mains plug
complying with EN 50075.
b) The shutters screening the
current-carrying socket contacts
shall not be opened by the insertion
of any corresponding SINGLE pin
of the plug into any current-carrying
socket aperture.
c) A barrier or other acceptable
means shall be provided on the
engagement surface of the 2.5A 2-
pin socket-outlet of the adaptor to
PREVENT entry of any types of 2-
pin mains plugs except those
complying with EN 50075. (note:
shutters cannot be regarded as
barriers)
d) Adaptor incorporates with switch
would require additional test to sub-
clauses 13.11, 17.1.3 and 18.1.3 of
SS 145: Part 2: 1997.
No multiway adaptor
N/A
Applicable to plasma/LCD display monitor
37
Plasma/LCD
display monitor
with TV tuner
display monitor
with TV tuner
Plasma/LCD display monitor tested
to IEC 60950 would require
additional test to clauses 9 (related
to antenna only), 10.1, 10.2, 10.3
and 12.5 of IEC 60065.
to IEC 60950 would require
additional test to clauses 9 (related
to antenna only), 10.1, 10.2, 10.3
and 12.5 of IEC 60065.
No plasma/LCD display
monitor.
monitor.
N/A
Page 5 of 5
Report No.: 209462
ATTACHMENT 4
Clause
Requirement + Test
Result - Remark
Verdict
TRF No. IEC60065K
Applicable to multiway adaptor
36
Multiway
adaptor with 3-
pin socket-
outlets or
combination of
3-pin and 2-pin
socket-outlets
adaptor with 3-
pin socket-
outlets or
combination of
3-pin and 2-pin
socket-outlets
a) The socket contacts of the
adaptor shall only accept 13A 3-pin
mains plug complying with SS 145
and/or 2.5A 2-pin mains plug
complying with EN 50075.
b) The shutters screening the
current-carrying socket contacts
shall not be opened by the insertion
of any corresponding SINGLE pin
of the plug into any current-carrying
socket aperture.
c) A barrier or other acceptable
means shall be provided on the
engagement surface of the 2.5A 2-
pin socket-outlet of the adaptor to
PREVENT entry of any types of 2-
pin mains plugs except those
complying with EN 50075. (note:
shutters cannot be regarded as
barriers)
d) Adaptor incorporates with switch
would require additional test to sub-
clauses 13.11, 17.1.3 and 18.1.3 of
SS 145: Part 2: 1997.
adaptor shall only accept 13A 3-pin
mains plug complying with SS 145
and/or 2.5A 2-pin mains plug
complying with EN 50075.
b) The shutters screening the
current-carrying socket contacts
shall not be opened by the insertion
of any corresponding SINGLE pin
of the plug into any current-carrying
socket aperture.
c) A barrier or other acceptable
means shall be provided on the
engagement surface of the 2.5A 2-
pin socket-outlet of the adaptor to
PREVENT entry of any types of 2-
pin mains plugs except those
complying with EN 50075. (note:
shutters cannot be regarded as
barriers)
d) Adaptor incorporates with switch
would require additional test to sub-
clauses 13.11, 17.1.3 and 18.1.3 of
SS 145: Part 2: 1997.
No multiway adaptor
N/A
Applicable to plasma/LCD display monitor
37
Plasma/LCD
display monitor
with TV tuner
display monitor
with TV tuner
Plasma/LCD display monitor tested
to IEC 60950 would require
additional test to clauses 9 (related
to antenna only), 10.1, 10.2, 10.3
and 12.5 of IEC 60065.
to IEC 60950 would require
additional test to clauses 9 (related
to antenna only), 10.1, 10.2, 10.3
and 12.5 of IEC 60065.
No plasma/LCD display
monitor.
monitor.
N/A
Page 5 of 5
Report No.: 209462
ATTACHMENT 4
Clause
Requirement + Test
Result - Remark
Verdict
TRF No. IEC60065K
Applicable to multiway adaptor
36
Multiway
adaptor with 3-
pin socket-
outlets or
combination of
3-pin and 2-pin
socket-outlets
adaptor with 3-
pin socket-
outlets or
combination of
3-pin and 2-pin
socket-outlets
a) The socket contacts of the
adaptor shall only accept 13A 3-pin
mains plug complying with SS 145
and/or 2.5A 2-pin mains plug
complying with EN 50075.
b) The shutters screening the
current-carrying socket contacts
shall not be opened by the insertion
of any corresponding SINGLE pin
of the plug into any current-carrying
socket aperture.
c) A barrier or other acceptable
means shall be provided on the
engagement surface of the 2.5A 2-
pin socket-outlet of the adaptor to
PREVENT entry of any types of 2-
pin mains plugs except those
complying with EN 50075. (note:
shutters cannot be regarded as
barriers)
d) Adaptor incorporates with switch
would require additional test to sub-
clauses 13.11, 17.1.3 and 18.1.3 of
SS 145: Part 2: 1997.
adaptor shall only accept 13A 3-pin
mains plug complying with SS 145
and/or 2.5A 2-pin mains plug
complying with EN 50075.
b) The shutters screening the
current-carrying socket contacts
shall not be opened by the insertion
of any corresponding SINGLE pin
of the plug into any current-carrying
socket aperture.
c) A barrier or other acceptable
means shall be provided on the
engagement surface of the 2.5A 2-
pin socket-outlet of the adaptor to
PREVENT entry of any types of 2-
pin mains plugs except those
complying with EN 50075. (note:
shutters cannot be regarded as
barriers)
d) Adaptor incorporates with switch
would require additional test to sub-
clauses 13.11, 17.1.3 and 18.1.3 of
SS 145: Part 2: 1997.
No multiway adaptor
N/A
Applicable to plasma/LCD display monitor
37
Plasma/LCD
display monitor
with TV tuner
display monitor
with TV tuner
Plasma/LCD display monitor tested
to IEC 60950 would require
additional test to clauses 9 (related
to antenna only), 10.1, 10.2, 10.3
and 12.5 of IEC 60065.
to IEC 60950 would require
additional test to clauses 9 (related
to antenna only), 10.1, 10.2, 10.3
and 12.5 of IEC 60065.
No plasma/LCD display
monitor.
monitor.
N/A
Page 5 of 5
Report No.: 209462
ATTACHMENT 4
Clause
Requirement + Test
Result - Remark
Verdict
TRF No. IEC60065K
Applicable to multiway adaptor
36
Multiway
adaptor with 3-
pin socket-
outlets or
combination of
3-pin and 2-pin
socket-outlets
adaptor with 3-
pin socket-
outlets or
combination of
3-pin and 2-pin
socket-outlets
a) The socket contacts of the
adaptor shall only accept 13A 3-pin
mains plug complying with SS 145
and/or 2.5A 2-pin mains plug
complying with EN 50075.
b) The shutters screening the
current-carrying socket contacts
shall not be opened by the insertion
of any corresponding SINGLE pin
of the plug into any current-carrying
socket aperture.
c) A barrier or other acceptable
means shall be provided on the
engagement surface of the 2.5A 2-
pin socket-outlet of the adaptor to
PREVENT entry of any types of 2-
pin mains plugs except those
complying with EN 50075. (note:
shutters cannot be regarded as
barriers)
d) Adaptor incorporates with switch
would require additional test to sub-
clauses 13.11, 17.1.3 and 18.1.3 of
SS 145: Part 2: 1997.
adaptor shall only accept 13A 3-pin
mains plug complying with SS 145
and/or 2.5A 2-pin mains plug
complying with EN 50075.
b) The shutters screening the
current-carrying socket contacts
shall not be opened by the insertion
of any corresponding SINGLE pin
of the plug into any current-carrying
socket aperture.
c) A barrier or other acceptable
means shall be provided on the
engagement surface of the 2.5A 2-
pin socket-outlet of the adaptor to
PREVENT entry of any types of 2-
pin mains plugs except those
complying with EN 50075. (note:
shutters cannot be regarded as
barriers)
d) Adaptor incorporates with switch
would require additional test to sub-
clauses 13.11, 17.1.3 and 18.1.3 of
SS 145: Part 2: 1997.
No multiway adaptor
N/A
Applicable to plasma/LCD display monitor
37
Plasma/LCD
display monitor
with TV tuner
display monitor
with TV tuner
Plasma/LCD display monitor tested
to IEC 60950 would require
additional test to clauses 9 (related
to antenna only), 10.1, 10.2, 10.3
and 12.5 of IEC 60065.
to IEC 60950 would require
additional test to clauses 9 (related
to antenna only), 10.1, 10.2, 10.3
and 12.5 of IEC 60065.
No plasma/LCD display
monitor.
monitor.
N/A
