Harman Kardon AVR 165 (serv.man5) EMC - CB Certificate ▷ View online
Page 2 of 5
Report No.: 162890
ATTACHMENT 4
Clause
Requirement + Test
Result - Remark
Verdict
TRF No. IEC60065J
5
Class I
appliances
appliances
(3-pin mains
plug)
plug)
All Class I appliances must be fitted
with 3-pin mains plugs complied
with SS 145/SS 472 that are
registered with the Safety Authority.
with 3-pin mains plugs complied
with SS 145/SS 472 that are
registered with the Safety Authority.
Class II apparatus
N/A
6
Class II
appliances
appliances
(mains plug)
a) All Class II appliances must be
fitted with 2-pin mains plug
(Appendix T) complied with EN
50075.
fitted with 2-pin mains plug
(Appendix T) complied with EN
50075.
b) Class II appliances that are fitted
with 3-pin mains plugs must use
plugs that are complied with SS 145
and registered with the Safety
Authority.
with 3-pin mains plugs must use
plugs that are complied with SS 145
and registered with the Safety
Authority.
Comply with SS145
P
7
Appliances rated
≥ 3 kW or
connected to
fixed wiring
≥ 3 kW or
connected to
fixed wiring
Electric appliance
≥ 3 kW must be
connected to fixed wiring. All
connection to fixed wiring must be
in accordance with Code of Practice
CP5.
connection to fixed wiring must be
in accordance with Code of Practice
CP5.
< 3 kW
N/A
8
Detachable
power cord set
(consists of
mains plug,
mains cord and
appliance
connector
power cord set
(consists of
mains plug,
mains cord and
appliance
connector
Detachable power cord set must be
listed in the test report critical
component list.
listed in the test report critical
component list.
Detachable power cord set.
Approved cord set provided.
See appended table, list of
critical components.
Approved cord set provided.
See appended table, list of
critical components.
P
9
Circuit diagrams
Circuit diagrams must be indicated
with component’s values for
products tested to IEC 60065 and
IEC 60950.
with component’s values for
products tested to IEC 60065 and
IEC 60950.
Comply
P
10
Circuit diagrams
of electronic
modules in
electrical
appliances
of electronic
modules in
electrical
appliances
Circuit diagrams of the electronic
modules in the electrical appliances
must be provided.
modules in the electrical appliances
must be provided.
No such module in the
apparatus
apparatus
N/A
11
Controlled goods
likely to be
treated as toy by
children
likely to be
treated as toy by
children
Controlled goods, having an
enclosure, which is shaped and
decorated so that it is likely to be
treated as a toy by children, shall
not be accepted for certification and
registration.
enclosure, which is shaped and
decorated so that it is likely to be
treated as a toy by children, shall
not be accepted for certification and
registration.
Apparatus is not likely to be
treated as a toy by children.
treated as a toy by children.
N/A
Page 3 of 5
Report No.: 162890
ATTACHMENT 4
Clause
Requirement + Test
Result - Remark
Verdict
TRF No. IEC60065J
No
Items
Requirements
Result - Remark
Verdict
Applicable to electric airport
12
Reboil Switch
No part of the reboil switch is
allowed to protrude into the water
pot, even if it is located above the m
aximum water level mark.
allowed to protrude into the water
pot, even if it is located above the m
aximum water level mark.
No electric airport
N/A
Applicable to AC adaptor
13
3-pin AC adaptor
(Appendix V)
Test report showing that the 3-pin
complied with sub-clauses 12.1 &
12.3 of SS 246 must be submitted.
complied with sub-clauses 12.1 &
12.3 of SS 246 must be submitted.
No AC adaptor
N/A
14
2-pin AC adaptor
(Appendix V)
The 2-pin (Appendix T) shall comply
with EN 50075.
with EN 50075.
N/A
15
Detachable
power supply
cord set not
supplied by
Registered
Supplier
power supply
cord set not
supplied by
Registered
Supplier
Registered Supplier who is not
supplying the detachable power
supply cord set together with the
AC Adaptor must provide written
instruction to its customer on the
type of approved detachable power
cord set to use.
supplying the detachable power
supply cord set together with the
AC Adaptor must provide written
instruction to its customer on the
type of approved detachable power
cord set to use.
N/A
Applicable to computer products
16
CD/DVD ROM
(used in
personal
computer)
(used in
personal
computer)
Test certificate showing that CD/DV
D ROM has complied with IEC 825
must be provided.
D ROM has complied with IEC 825
must be provided.
No CD/DVD ROM
N/A
17
Modem Card
(used in
personal
computer)
(used in
personal
computer)
Modem card incorporated in the
personal computer must be tested
at set level (sub-clauses 5.1 & 6 of
IEC 60950) or at component level.
personal computer must be tested
at set level (sub-clauses 5.1 & 6 of
IEC 60950) or at component level.
No modem
N/A
Applicable to ceiling fan and cycle fan
18
Ceiling fan and
cycle fan
cycle fan
a) These appliances must be tested
to sub-clauses 5.7 and 5.8 of SS
360: 1992.
to sub-clauses 5.7 and 5.8 of SS
360: 1992.
b) Installation instruction must
mention the 3 expansion bolts for
fastening the main suspension,
safety cord, expansion bolt with
hook for fastening safety cord and
mounting plate. (Appendix Q)
mention the 3 expansion bolts for
fastening the main suspension,
safety cord, expansion bolt with
hook for fastening safety cord and
mounting plate. (Appendix Q)
c) Drawing (Appendix P) to show
that the wires within the motor shaft
are not stressed must be provided.
that the wires within the motor shaft
are not stressed must be provided.
No such fans
N/A
Page 4 of 5
Report No.: 162890
ATTACHMENT 4
Clause
Requirement + Test
Result - Remark
Verdict
TRF No. IEC60065J
Applicable to portable/wall socket-outlet and portable cable reel
19
Portable/wall
socket-outlet and
portable cable
reel
socket-outlet and
portable cable
reel
a) If residual current device (RCD)
is incorporated, its tripping current
must be less than 30mA and
operating time must be less than
0.1 second and testing to sub-
clauses 9.9.2.1, 9.9.2.2, 9.9.2.3 and
9.16 of SS 97: Part 1: 2000 are
required.
is incorporated, its tripping current
must be less than 30mA and
operating time must be less than
0.1 second and testing to sub-
clauses 9.9.2.1, 9.9.2.2, 9.9.2.3 and
9.16 of SS 97: Part 1: 2000 are
required.
b) The shutters screening the
current-carrying socket contacts
shall not be opened by the insertion
of any corresponding SINGLE pin
of the plug into any current-carrying
socket aperture.
current-carrying socket contacts
shall not be opened by the insertion
of any corresponding SINGLE pin
of the plug into any current-carrying
socket aperture.
N/A
Applicable to roaster
20
Roaster
A metal ring (Appendix U) must be
provided to prevent the roaster from
falling off in case the glass bowl
shattered.
provided to prevent the roaster from
falling off in case the glass bowl
shattered.
No
roaster
N/A
Applicable to Residual Current Circuit Breaker (RCCB)
31
RCCB
Registration of RCCB is limited to
30 mA sensitivity and the operating
time must be less than 0.1 second.
Electronic RCCB will not be
accepted for registration.
30 mA sensitivity and the operating
time must be less than 0.1 second.
Electronic RCCB will not be
accepted for registration.
No residual current circuit
breaker
breaker
N/A
Applicable to electric instantaneous and storage water heater
32
Instantaneous
electric water
heater and mains
pressure electric
storage water
heater
electric water
heater and mains
pressure electric
storage water
heater
Heating elements used must not be
of the "bare-element" type.
of the "bare-element" type.
No electric instantaneous
and storage water heater
and storage water heater
N/A
33
Water heater
incorporated with
residual current
device(RCD)
incorporated with
residual current
device(RCD)
Testing to sub-clauses 9.9.2.1,
9.9.2.2, 9.9.2.3 and 9.16 of SS 97:
Part 1: 2000 are required.
9.9.2.2, 9.9.2.3 and 9.16 of SS 97:
Part 1: 2000 are required.
N/A
Page 5 of 5
Report No.: 162890
ATTACHMENT 4
Clause
Requirement + Test
Result - Remark
Verdict
TRF No. IEC60065J
Applicable to multiway adaptor
34
Multiway adaptor
with 3-pin socket-
outlets or
combination of 3-
pin and 2-pin
socket-outlets
with 3-pin socket-
outlets or
combination of 3-
pin and 2-pin
socket-outlets
a) The socket contacts of the
adaptor shall only accept 13A 3-pin
mains plug complying with SS 145
and/or 2.5A 2-pin mains plug
complying with EN 50075.
adaptor shall only accept 13A 3-pin
mains plug complying with SS 145
and/or 2.5A 2-pin mains plug
complying with EN 50075.
b) The shutters screening the
current-carrying socket contacts
shall not be opened by the insertion
of any corresponding SINGLE pin
of the plug into any current-carrying
socket aperture.
current-carrying socket contacts
shall not be opened by the insertion
of any corresponding SINGLE pin
of the plug into any current-carrying
socket aperture.
c) A barrier or other acceptable
means shall be provided on the
engagement surface of the 2.5A 2-
pin socket-outlet of the adaptor to
PREVENT entry of any types of 2-
pin mains plugs except those
complying with EN 50075. (note:
shutters cannot be regarded as
barriers)
means shall be provided on the
engagement surface of the 2.5A 2-
pin socket-outlet of the adaptor to
PREVENT entry of any types of 2-
pin mains plugs except those
complying with EN 50075. (note:
shutters cannot be regarded as
barriers)
d) Adaptor incorporates with switch
would require additional test to sub-
clauses 13.11, 17.1.3 and 18.1.3 of
SS 145: Part 2: 1997.
would require additional test to sub-
clauses 13.11, 17.1.3 and 18.1.3 of
SS 145: Part 2: 1997.
No multiway adaptor
N/A
Applicable to plasma/LCD display monitor
35
Plasma/LCD
display monitor
with TV tuner
display monitor
with TV tuner
Plasma/LCD display monitor tested
to IEC 60950 would require
additional test to clauses 9 (related
to antenna only), 10.1, 10.2, 10.3
and 12.5 of IEC 60065.
to IEC 60950 would require
additional test to clauses 9 (related
to antenna only), 10.1, 10.2, 10.3
and 12.5 of IEC 60065.
No plasma/LCD display
monitor
monitor
N/A
Click on the first or last page to see other AVR 165 (serv.man5) service manuals if exist.