Sharp XG-MB70X (serv.man33) User Manual / Operation Manual ▷ View online
-58
Setting the Audio Output
Type
Type
This function determines whether the audio level
output from the AUDIO OUTPUT terminal is fixed
or variable by linking with VOLUME.
output from the AUDIO OUTPUT terminal is fixed
or variable by linking with VOLUME.
Menu operation
Page
42
Example: “Options2” screen menu
Description of Audio Out Settings
Info
• When “Audio Out” has been set to “VAO”, first make
sure to lower the volume of the projector before
turning the power on or off and when switching the
input.
turning the power on or off and when switching the
input.
Description
Audio output that does not vary in
strength with the volume level of the
source projector.
Audio output that varies in strength with
the volume level of the source projector.
strength with the volume level of the
source projector.
Audio output that varies in strength with
the volume level of the source projector.
Selectable items
FAO
(Fixed Audio
Output)
VAO
(Variable
Audio Output)
FAO
(Fixed Audio
Output)
VAO
(Variable
Audio Output)
Helpful Functions Set during Installation (“Options2” menu)
Speaker Setting
This function allows you to set the audio output
of the internal speaker to “ON” or “OFF” such as
when the projector is connected to an external
amplifier.
of the internal speaker to “ON” or “OFF” such as
when the projector is connected to an external
amplifier.
Menu operation
Page
42
Example: “Options2” screen menu
Description of Speaker Settings
Selectable items
(ON)
(OFF)
Description
The audio signal is output from the internal
speaker.
The audio signal is not output from the
internal speaker.
speaker.
The audio signal is not output from the
internal speaker.
XG-MB70X_E_P50_62.p65
2004.8.6, 0:01 PM
58
-59
Useful Features
Reversing/Inverting Pro-
jected Images
jected Images
This projector is equipped with a reverse/invert
image function that allows you to reverse or in-
vert the projected image for various applications.
image function that allows you to reverse or in-
vert the projected image for various applications.
Menu operation
Page
42
Example: “Options2” screen menu
Description of PRJ Modes
Note
• This function is used for the reversed image and
ceiling-mount setups. (See page
20
.)
Description
Normal image
Inverted image
Reversed image
Reversed and inverted image
Selectable items
Front
Ceiling + Front
Rear
Ceiling + Rear
Selecting the Transmis-
sion Speed (RS-232C)
sion Speed (RS-232C)
Make sure that both the projector and computer
are set for the same baud rate.
are set for the same baud rate.
Menu operation
Page
42
Example: “Options2” screen menu
Description of RS-232C
Note
• Refer to the “SETUP GUIDE” contained on the
supplied CD-ROM for RS-232C Specifications
and Command Settings.
and Command Settings.
• Refer to the computer’s operation manual for
instructions for setting the computer’s baud rate.
Description
Transmission speed is slow.
Transmission speed is rapid.
Selectable items
9600 bps
115200 bps
XG-MB70X_E_P50_62.p65
2004.8.6, 0:01 PM
59
-60
Monitor Output Settings
When the Monitor Out has been set to “Enable”,
the monitor output is activated and power is con-
sumed even in the standby mode. It is recom-
mended that the Monitor Out be set to “Disable”
when it is not connected. This reduces power
consumption when the projector is in the standby
mode.
the monitor output is activated and power is con-
sumed even in the standby mode. It is recom-
mended that the Monitor Out be set to “Disable”
when it is not connected. This reduces power
consumption when the projector is in the standby
mode.
Menu operation
Page
42
Example: “Options2” screen menu
Description of Monitor Out
Description
The monitor output function is activated
even if the projector is in standby mode.
The monitor output function is switched off
when the projector is in standby mode.
even if the projector is in standby mode.
The monitor output function is switched off
when the projector is in standby mode.
Selectable items
Enable
Disable
Helpful Functions Set during Installation (“Options2” menu)
LAN/RS232C Setting
When the LAN/RS232C has been set to “Enable”,
the LAN/RS232C is activated and power is con-
sumed even in the standby mode. It is recom-
mended that the LAN/RS232C be set to “Disable”
when it is not connected. This reduces power
consumption when the projector is in the standby
mode.
the LAN/RS232C is activated and power is con-
sumed even in the standby mode. It is recom-
mended that the LAN/RS232C be set to “Disable”
when it is not connected. This reduces power
consumption when the projector is in the standby
mode.
Menu operation
Page
42
Example: “Options2” screen menu
Description of LAN/RS232C
Note
• When you want to control the projector using
the LAN/RS-232C function, set “Enable.”
Description
The LAN/RS232C function is activated
even if the projector is in standby mode.
The LAN/RS232C function is switched off
when the projector is in standby mode.
even if the projector is in standby mode.
The LAN/RS232C function is switched off
when the projector is in standby mode.
Selectable items
Enable
Disable
XG-MB70X_E_P50_62.p65
2004.8.6, 0:01 PM
60
-61
Useful Features
Returning to the Default
Settings
Settings
This function allows you to initialize the settings
you have made in the projector.
you have made in the projector.
Menu operation
Page
42
Example: “Options2” screen menu
Note
About the network settings
• “Projector” and “IP Address” on the “Options2”
• “Projector” and “IP Address” on the “Options2”
menu and the network setting items described
on the “SETUP GUIDE” are initialized.
on the “SETUP GUIDE” are initialized.
The following items or menu cannot be initialized.
• Special Modes (“Fine Sync” menu)
• Lamp Timer (Life), System Lock (“Options1”
• Special Modes (“Fine Sync” menu)
• Lamp Timer (Life), System Lock (“Options1”
menu)
• “Language” menu
Confirming the Network In-
formation for the Projector
formation for the Projector
You can confirm the projector name, IP address
and MAC address.
and MAC address.
Menu operation
Page
42
Example: “Options2” screen menu
Description of Network Information
Note
• For information on how to change the projector
name and IP address, see “SETUP GUIDE”
contained in the supplied CD-ROM.
contained in the supplied CD-ROM.
Displayed items
Projector
IP Address
MAC Address
Description
The projector name is displayed.
(Factory preset : XG-MB70X)
The IP address set for the projector is
displayed.
(Factory preset :192.168.150.2)
The MAC address of the projector is
displayed.
(Factory preset : XG-MB70X)
The IP address set for the projector is
displayed.
(Factory preset :192.168.150.2)
The MAC address of the projector is
displayed.
XG-MB70X_E_P50_62.p65
2004.8.6, 2:23 PM
61
Click on the first or last page to see other XG-MB70X (serv.man33) service manuals if exist.