Sony SLV-SE740B / SLV-SE740D / SLV-SE740E / SLV-SE740G / SLV-SE740I / SLV-SE740N / SLV-SE747E / SLV-SE840B / SLV-SE840D / SLV-SE840E / SLV-SE840G / SLV-SE840N / SLV-SX740D / SLV-SX740E / SLV-SX740N Service Manual ▷ View online
1-9
36
Playing a tape
Starting playback automatically with one button (One
Touch Play)
Touch Play)
If you use the SMARTLINK connection, you can turn on the TV, set the TV
to the video channel, and start playback automatically with one button.
Tip
• When there already is a tape in the VCR, press ?/1 to turn on the VCR first. When
• When there already is a tape in the VCR, press ?/1 to turn on the VCR first. When
you press H (play), the TV turns on, the TV is set to the video channel, and
playback starts automatically in one sequence.
Note
• When you use the One Touch Play function, leave the TV on or in the standby
• When you use the One Touch Play function, leave the TV on or in the standby
mode.
1
Insert a tape.
The VCR automatically turns on.
If you insert a tape with its safety tab removed, the TV turns on and
The VCR automatically turns on.
If you insert a tape with its safety tab removed, the TV turns on and
switches to the video channel. Playback starts automatically.
2
Press H (play).
The TV turns on and switches to the video channel automatically.
The TV turns on and switches to the video channel automatically.
Playback starts.
37
Recording TV programmes
Ba
sic
sic
Op
er
er
at
io
n
s
Recording TV programmes
Before you start...
• Refer to “Index to parts and controls” for button locations.
1
Turn on your TV and set it to the video channel.
To record from a satellite or digital tuner, turn it on.
To record from a satellite or digital tuner, turn it on.
2
Insert a tape with its safety tab in place.
3
• To record a normal channel, press PROG +/– until the programme
position number or station name you want appears in the display
window.
• To record from other equipment connected to one or more of the
LINE inputs, press INPUT SELECT until the connected line
appears in the display window.
4
Press SP/LP to select the tape speed, SP or LP.
LP (Long Play) provides recording time twice as long as SP.
LP (Long Play) provides recording time twice as long as SP.
However, SP (Standard Play) produces better picture and audio
quality.
• PROG
INPUT SELECT
SP / LP
continued
38
Recording TV programmes
To stop recording
Press x (stop).
Press x (stop).
To check the remaining time
Press
Press
DISPLAY twice. With the display on, press COUNTER/REMAIN
to check the remaining time. Each time you press COUNTER/REMAIN,
the time counter and the remaining time appear alternately.
In order to get an accurate remaining time indication, be sure TAPE
SELECT in the USER SET menu is set according to the tape type you use
(see page 66).
To watch another TV programme while recording
5
Press z REC to start recording.
The recording indicator lights up in the display window.
The recording indicator lights up in the display window.
1
Press t TV/VIDEO to turn off the VIDEO indicator in the display
window.
2
Select another programme position on the TV.
REC
Recording indicator
SE840G, SE740G/I
6
1 : 4
R E M A I N
2
0 : 0 0 : 2
Remaining time
Time counter
39
Recording TV programmes
Ba
sic
sic
Op
er
er
at
io
n
s
To save a recording
To prevent accidental erasure, break off the
To prevent accidental erasure, break off the
safety tab as illustrated. To record on the
same tape again, cover the tab hole with
adhesive tape.
Tips
• To select a programme position, you can use the programme number buttons on the
• To select a programme position, you can use the programme number buttons on the
remote commander. For two-digit numbers, press -/-- (ten’s digit) followed by the
programme number buttons.
• If you connect additional equipment to a LINE connector or jack, you can select
the input signal using the INPUT SELECT or PROG +/– buttons.
• The
DISPLAY information appears on the TV screen indicating information
about the tape, but the information will not be recorded on the tape.
• If you do not want to watch TV while recording, you can turn off the TV. When
using a satellite or digital tuner, make sure to leave it on.
Notes
• The
• The
DISPLAY information does not appear during still (pause) mode or slow-
motion playback.
• If a tape has portions recorded in both PAL and NTSC systems, the time counter
reading will not be correct. This discrepancy is due to the difference between the
counting cycles of the two video systems.
• When you insert a non-standard commercially available tape, the remaining time
may not be correct.
• The remaining time is intended for rough measurement only.
• About 30 seconds after the tape begins playback, the tape remaining time will be
• About 30 seconds after the tape begins playback, the tape remaining time will be
displayed.
• To use the TV Direct Rec function, select SMARTLINK in the INSTALLATION
menu, then set TV DIRECT RECORD to ON.
Safety tab
continued
1-10
40
Recording TV programmes
Recording what you are watching on the TV (TV Direct
Rec)
Rec)
If you use the SMARTLINK connection, you can easily record what you are
watching on the TV (other than tapes being played on the VCR).
Tip
• The TV indicator appears in the display window after you press z REC in some
• The TV indicator appears in the display window after you press z REC in some
situations such as:
– when you are watching a source connected to the TV’s line input, or
– when the TV tuner preset data for the programme position is different from the
– when you are watching a source connected to the TV’s line input, or
– when the TV tuner preset data for the programme position is different from the
data in the VCR tuner preset.
Notes
• You cannot record what you are watching using this method when the VCR is in
• You cannot record what you are watching using this method when the VCR is in
the following modes; pause, timer standby, tuner preset, Auto Set Up, and
recording.
• When the TV indicator is lit in the display window, do not turn off the TV nor
change the TV programme position. When the TV indicator is not lit, the VCR
continues recording the programme even if you change the TV programme
position on the TV.
• To use the TV Direct Rec function, select SMARTLINK in the INSTALLATION
menu, then set TV DIRECT RECORD to ON.
1
Press ?/1 to turn on the VCR.
2
Insert a tape with its safety tab in place.
3
Press z REC while you are watching a TV programme or external
source.
The TV indicator lights up and the VCR starts recording what you are
The TV indicator lights up and the VCR starts recording what you are
watching on the TV.
41
Recording TV programmes using the Dial Timer (SLV-SE840G only)
Ba
sic
sic
Op
er
er
at
io
ns
Recording TV programmes using the Dial
Timer
(SLV-SE840G only)
The Dial Timer function allows you to
make timer recordings of programmes
without turning on your TV. Set the
recording timer to record up to eight
programmes, including settings made with
other timer methods, that will be broadcast
within the next month. The recording start
time and recording stop time can be set at
one minute intervals.
Before you start...
• Insert a tape with its safety tab in place. Make sure the tape is longer than the total recording
time.
• To record from a satellite or digital tuner, turn it on.
• Refer to “Index to parts and controls” for button locations.
1
Press
DIAL
TIMER.
“DATE” and “TODAY” appear alternately in the display window.
If the date and time are not set, “DAY” will appear. See step 2 in the
If the date and time are not set, “DAY” will appear. See step 2 in the
following section, “To set the clock” to set the date and time.
2
Turn
DIAL TIMER to set the recording date.
DIAL TIMER
PROGRAM +/–
?/1
x
X
DIAL TIMER
DIAL TIMER
continued
42
Recording TV programmes using the Dial Timer (SLV-SE840G only)
3
Press DIAL TIMER.
“START” and the current time appear alternately in the display
“START” and the current time appear alternately in the display
window.
4
Turn
DIAL TIMER to set the recording start time.
You can set the recording start time in 15 minute intervals or adjust
the time in one minute intervals by pressing the PROGRAM +/–
buttons.
5
Press DIAL TIMER.
“STOP” and the recording stop time alternately appear in the
“STOP” and the recording stop time alternately appear in the
display window.
6
Turn
DIAL TIMER to set the recording stop time.
You can set the recording stop time in 15 minute intervals or adjust
the time in one minute intervals by pressing the PROGRAM +/–
buttons.
DIAL TIMER
DIAL TIMER
PROGRAM
DIAL TIMER
DIAL TIMER
PROGRAM
43
Recording TV programmes using the Dial Timer (SLV-SE840G only)
Ba
sic
sic
Op
er
er
at
io
ns
To return to the previous step
To return to the previous step, press the PROGRAM + and – buttons on the
To return to the previous step, press the PROGRAM + and – buttons on the
VCR at the same time during any of the Dial Timer settings.
To stop recording
To stop the VCR while recording, press x (stop).
To stop the VCR while recording, press x (stop).
To use the VCR after setting the timer
To use the VCR before a recording begins, just press ?/1. The indicator
To use the VCR before a recording begins, just press ?/1. The indicator
turns off and the VCR switches on. Remember to press ?/1 to reset the VCR
to recording standby after using the VCR.
You can also do the following tasks while the VCR is recording:
• Reset the counter (page 35).
• Display tape information on the TV screen (page 38).
• Check the timer settings (page 58).
• Watch another TV programme (page 38).
You can also do the following tasks while the VCR is recording:
• Reset the counter (page 35).
• Display tape information on the TV screen (page 38).
• Check the timer settings (page 58).
• Watch another TV programme (page 38).
7
Press
DIAL
TIMER.
The programme position or LINE input appears in the display
window.
8
Turn
DIAL TIMER to set the programme position.
To record from other equipment connected to one or more of the
LINE inputs, turn DIAL TIMER or press INPUT SELECT to
LINE inputs, turn DIAL TIMER or press INPUT SELECT to
display the connected line in the display window.
9
Press DIAL TIMER to complete the setting.
“OK” appears in the display window for about five seconds.
The indicator appears in the display window and the VCR stands
“OK” appears in the display window for about five seconds.
The indicator appears in the display window and the VCR stands
by for recording.
To record from other equipment, leave the connected equipment
To record from other equipment, leave the connected equipment
switched on.
DIAL TIMER
DIAL TIMER
INPUT SELECT
DIAL TIMER
continued
1-11
44
Recording TV programmes using the Dial Timer (SLV-SE840G only)
To set the clock
Tips
• To cancel a Dial Timer setting, press
• To cancel a Dial Timer setting, press
x
(stop) on the VCR while you are making
the setting.
• The programme is recorded in the current tape speed mode. To change the tape
speed, press SP/LP before you complete the setting in step 9.
• To check, change, or cancel the programme setting, see “Checking/changing/
cancelling timer settings” on page 58.
Notes
• If eight programmes have already been set using the VIDEO Plus+ system or the
• If eight programmes have already been set using the VIDEO Plus+ system or the
TIMER PROGRAMMING menu, “FULL” appears in the display window for
about five seconds.
• The
and
indicators flash in the display window when you complete the
setting in step 9 with no tape inserted.
• If you set the clock using the Auto Clock Set function and AUTO CLOCK is set to
ON, the clock will adjust itself to the incoming time signal regardless of
adjustments made with the Dial Timer. Be sure you have set the Auto Clock Set
correctly.
• When the time is set incorrectly, “ERROR” appears in the display window in step
9. Set the timer again from step 1.
• You cannot set the tape speed to AUTO using the Dial Timer. To select AUTO, set
the tape speed in the TIMER PROGRAMMING menu (see page 58).
1
Hold down DIAL TIMER so that “DAY” appears in the display
window. However, if the clock has already been set, the current setting
appears.
2
Turn DIAL TIMER to set the day.
3
Press DIAL TIMER.
“MONTH” appears in the display window.
4
Turn and press DIAL TIMER to set the month, and then the year.
After you set the year, “CLOCK” appears in the display window again.
5
Turn and press DIAL TIMER to set the hour and minute.
6
When you have finished setting the time, press DIAL TIMER to start
the clock.
45
Recording TV programmes using the Dial Timer (SLV-SE840G only)
Ba
sic
sic
Op
er
er
at
io
ns
About the Demonstration Mode
The Dial Timer function has a Demonstration Mode that allows the user, such as a
salesperson, to enter more than eight examples of timer settings when demonstrating
the use of the Dial Timer. It cancels the “FULL” notice which appears if eight
programmes have already been set. Do not use the Demonstration Mode for making
timer recordings. Doing so may cause the settings to be inaccurate.
To activate the Demonstration Mode
Press X (pause) on the VCR while turning the DIAL TIMER. “DEMO”
Press X (pause) on the VCR while turning the DIAL TIMER. “DEMO”
appears in the display window for a few seconds.
To cancel the Demonstration Mode
Turn the power off and unplug the mains lead. Although the Demonstration
Turn the power off and unplug the mains lead. Although the Demonstration
Mode is cancelled, the timer settings entered while using the Demonstration
Mode will remain. Be sure to manually cancel the timer settings before you
use the Dial Timer or any other timer method after reconnecting the mains
lead (see page 58).
46
Recording TV programmes using the VIDEO Plus+
®
system
Recording TV programmes using the
VIDEO Plus+
VIDEO Plus+
®
system
The VIDEO Plus+ system is the feature that simplifies programming the VCR to
make timer recordings. Just enter the PlusCode number listed in the TV programme
guide. The date, times, and programme position of that programme are set
automatically. You can preset a total of eight programmes, including settings made
with other timer methods.
Before you start
…
• Check that the VCR clock is set to the correct time and date.
• Insert a tape with its safety tab in place. Make sure the tape is longer than the total recording
time.
• To record from a satellite or digital tuner, turn it on.
• Turn on your TV and set it to the video channel.
• Set TIMER METHOD to VIDEOPLUS or VARIABLE in the EASY OPERATION menu
(see page 67).
• Refer to “Index to parts and controls” for button locations.
1
Press TIMER.
• When you set TIMER METHOD
• When you set TIMER METHOD
to VARIABLE:
The TIMER METHOD menu
appears on the TV screen. Press
M/m to select VIDEOPLUS, then
press OK.
• When you set TIMER METHOD
to VIDEOPLUS:
The VIDEOPLUS menu appears
on the TV screen.
TIMER
OK
M E N U
:
O K
:
S E T
S E L E C T
T I M E R M E T H O D
S T A N D A R D
V I D E O P L U S
V I D E O P L U S
:
E X I T
M E N U
:
O K
:
S E T
C O D E
0 – 9
V I D E O P L U S
C O D E
– – – – – – – – –
:
E X I T
47
Recording TV programmes using the VIDEO Plus+
®
system
Ba
sic
sic
Op
er
er
at
io
n
s
2
Press the programme number
buttons to enter the PlusCode
number.
If you make a mistake, press
If you make a mistake, press
CLEAR and re-enter the correct
number.
3
Press OK.
The date, start and stop times,
The date, start and stop times,
programme position, tape speed and
PDC setting appear on the TV
screen.
• If “– –” appears in the “PR”
• If “– –” appears in the “PR”
(programme) column (this may
happen for local broadcasts), you
have to set the appropriate
programme position manually.
Press M/m to select the desired programme position.
• To record from other equipment connected to one or more of the
LINE inputs, press INPUT SELECT to display the connected line
in the “PR” position.
You will only have to do this operation once for the referred
channel. The VCR will then store your setting.
If the information is incorrect, press CLEAR to cancel the setting.
If the information is incorrect, press CLEAR to cancel the setting.
4
If you want to change the date, tape
speed and the PDC setting:
1 Press </, to select the item
1 Press </, to select the item
you want to change.
2 Press M/m to reset it.
• To record the same programme
every day or the same day every
week, see “Daily/weekly
recording” on page 48.
• To use the PDC function, set V/P to ON. For details about the
PDC function, see “Timer recording with PDC signals” on
page 48.
5
Press MENU to exit the menu.
1
2
3
4
5
6
7
8
9
0
CLEAR
M E N U
:
O K
:
S E T
C O D E
0 – 9
V I D E O P L U S
C O D E
1 2 3 4 – – – – –
:
E X I T
CLEAR
OK
INPUT SELECT
S E T
M E N U
:
:
O K
:
E N D
S E L E C T
– –
– – – –
– –
– –
–
– –
–
–
:
:
3 5
S A 2 9
1 9
0 0
2
0 0
0
:
:
– –
– – – –
– –
– –
–
– –
–
–
–
:
:
– –
– – – –
– –
– –
–
– –
–
–
:
:
– –
– – – –
– –
– –
–
– –
–
–
:
:
– –
– – – –
– –
– –
–
– –
–
–
SP
–
–
–
–
–
–
–
–
:
:
– –
– – – –
– –
– –
–
– –
–
–
:
:
– –
– – – –
– –
– –
–
– –
–
–
–
–
:
:
:
E X I T
P R
D A Y
S T A R T
S T O P
V/P
OK
S E T
M E N U
:
:
O K
:
E N D
S E L E C T
– –
– – – –
– –
– –
–
– –
–
–
:
:
P R
D A Y
S T A R T
S T O P
V/P
3 5
S A 2 9
1 9
0 0
2
0 0
ON
0
:
:
– –
– – – –
– –
– –
–
– –
–
–
:
:
– –
– – – –
– –
– –
–
– –
–
–
:
:
– –
– – – –
– –
– –
–
– –
–
–
:
:
– –
– – – –
– –
– –
–
– –
–
–
SP
–
–
–
–
–
–
–
–
:
:
– –
– – – –
– –
– –
–
– –
–
–
:
:
– –
– – – –
– –
– –
–
– –
–
–
–
–
:
:
:
E X I T
MENU
continued
1-12
48
Recording TV programmes using the VIDEO Plus+
®
system
To stop recording
To stop the VCR while recording, press x (stop).
To stop the VCR while recording, press x (stop).
Daily/weekly recording
In step 4 above, press m to select the recording pattern. Each time you press
In step 4 above, press m to select the recording pattern. Each time you press
m, the indication changes as shown below. Press M to change the indication
in reverse order.
today t DLY (Monday to Sunday) t W-SA (every Saturday) ..... t
W-SU (every Sunday) t 1 month later t (dates count down) t today
W-SU (every Sunday) t 1 month later t (dates count down) t today
Timer recording with PDC signals
Some broadcast systems transmit PDC (Programme Delivery Control)
Some broadcast systems transmit PDC (Programme Delivery Control)
signals with their TV programmes. These signals ensure that your timer
recordings are made regardless of broadcast delays, early starts, or broadcast
interruptions.
To use the PDC function, set V/P to ON in step 4 above. You can also use
To use the PDC function, set V/P to ON in step 4 above. You can also use
the PDC function for a source connected to one or more of the LINE inputs.
To record satellite broadcasts
If you connect the satellite tuner and the VCR, you can record satellite
If you connect the satellite tuner and the VCR, you can record satellite
programmes.
6
Press ?/1 to turn off the VCR.
The indicator appears in the display window and the VCR stands
The indicator appears in the display window and the VCR stands
by for recording.
To record from a decoder or other source, leave the connected
To record from a decoder or other source, leave the connected
equipment switched on.
1
Turn on the satellite tuner.
2
On the satellite tuner, select the satellite programme for which you want
to make a timer setting.
3
Keep the satellite tuner turned on until the VCR finishes recording the
satellite programme for which you have made a timer setting.
49
Recording TV programmes using the VIDEO Plus+
®
system
Ba
sic
sic
Op
er
er
at
io
n
s
To use the VCR after setting the timer
To use the VCR before a recording begins, just press ?/1. The indicator
To use the VCR before a recording begins, just press ?/1. The indicator
turns off and the VCR switches on. Remember to press ?/1 to reset the VCR
to recording standby after using the VCR.
You can also do the following tasks while the VCR is recording:
• Reset the counter (page 35).
• Display tape information on the TV screen (page 38).
• Check the timer settings (page 58).
• Watch another TV programme (page 38).
You can also do the following tasks while the VCR is recording:
• Reset the counter (page 35).
• Display tape information on the TV screen (page 38).
• Check the timer settings (page 58).
• Watch another TV programme (page 38).
To use the Auto Tape Speed function
In step 4 above, press m to select AUTO. When you are recording a
In step 4 above, press m to select AUTO. When you are recording a
programme in the SP mode and the remaining tape length becomes shorter
than the recording time, the recording tape speed is automatically changed to
the LP mode. Note that some noise will appear on the picture when the tape
speed is changed. To operate this function correctly, the “TAPE SELECT”
setting in the USER SET menu must be accurate (see page 66).
Tips
• To set the line input video source, you can also use the INPUT SELECT button.
• You can set the extended time for the VIDEO Plus+ setting by 10, 20, 30, 40, 50, or
• To set the line input video source, you can also use the INPUT SELECT button.
• You can set the extended time for the VIDEO Plus+ setting by 10, 20, 30, 40, 50, or
60 minutes. Set VIDEOPLUS EXTEND in the EASY OPERATION menu to the
desired extended time on page 67.
• To check, change, or cancel the programme setting, see “Checking/changing/
cancelling timer settings” on page 58.
Notes
• If the PDC signal is too weak or the broadcasting station failed to transmit PDC
• If the PDC signal is too weak or the broadcasting station failed to transmit PDC
signals, the VCR will start recording at the set time without using the PDC
function.
• The and
indicators flash in the display window when you press ?/1 with
no tape inserted.
• When you set TIMER METHOD to STANDARD in the EASY OPERATION
menu, the VIDEOPLUS menu does not appear on the TV screen. Select
VIDEOPLUS or VARIABLE.
50
Setting the timer manually
Setting the timer manually
You can preset a total of eight programmes, including settings made with other timer
methods.
Before you start
…
• Check that the VCR clock is set to the correct time and date.
• Insert a tape with its safety tab in place. Make sure the tape is longer than the total recording
time.
• To record from a satellite or digital tuner, turn it on.
• Turn on your TV and set it to the video channel.
• Set TIMER METHOD to STANDARD or VARIABLE in the EASY OPERATION menu (see
page 67).
• Refer to “Index to parts and controls” for button locations.
1
Press
TIMER.
• When you set TIMER METHOD
to VARIABLE:
The TIMER METHOD menu
appears on the TV screen. Press
M/m to select STANDARD, then
press OK.
• When you set TIMER METHOD
to STANDARD:
The TIMER PROGRAMMING
menu appears on the TV screen.
TIMER
OK
M E N U
:
O K
:
S E T
S E L E C T
T I M E R M E T H O D
S T A N D A R D
V I D E O P L U S
V I D E O P L U S
:
E X I T
S E T
M E N U
:
:
O K
:
E N D
S E L E C T
– –
– – – –
– –
– –
–
– –
–
–
:
:
P R
D A Y
S T A R T
S T O P
V/P
– –
– – – –
– –
– –
–
– –
–
–
:
:
– –
– – – –
– –
– –
–
– –
–
–
:
:
– –
– – – –
– –
– –
–
– –
–
–
:
:
– –
– – – –
– –
– –
–
– –
–
–
:
:
– –
– – – –
– –
– –
–
– –
–
–
–
–
–
–
–
–
–
–
–
–
:
:
– –
– – – –
– –
– –
–
– –
–
–
:
:
– –
– – – –
– –
– –
–
– –
–
–
–
–
:
:
:
E X I T
51
Setting the timer manually
Ba
sic
sic
Op
er
er
at
io
ns
To stop recording
To stop the VCR while recording, press x (stop).
To stop the VCR while recording, press x (stop).
Daily/weekly recording
In step 2 above, press m to select the recording pattern. Each time you press
In step 2 above, press m to select the recording pattern. Each time you press
m, the indication changes as shown below. Press M to change the indication
in reverse order.
today t DLY (Monday to Sunday) t W-SA (every Saturday) ..... t
W-SU (every Sunday) t 1 month later t (dates count down) t today
W-SU (every Sunday) t 1 month later t (dates count down) t today
2
Set the date, start and stop times,
programme position, tape speed and
PDC function:
1 Press , to select each item in
1 Press , to select each item in
turn.
2 Press M/m to set each item.
To correct a setting, press < to
return to that setting and reset.
• To record the same programme
• To record the same programme
every day or the same day every week, see “Daily/weekly
recording” on page 51.
• To use the PDC function, set V/P to ON. For details about the
PDC function, see “Timer recording with PDC signals” on
page 48.
• To record from other equipment connected to one or more of the
LINE inputs, press INPUT SELECT to display the connected line
in the “PR” position.
3
Press MENU to exit the menu.
4
Press ?/1 to turn off the VCR.
The indicator appears in the display window and the VCR stands
The indicator appears in the display window and the VCR stands
by for recording.
To record from other equipment, leave the connected equipment
To record from other equipment, leave the connected equipment
switched on.
OK
INPUT SELECT
S E T
M E N U
:
:
O K
:
E N D
S E L E C T
– –
– – – –
– –
– –
–
– –
–
–
:
:
P R
D A Y
S T A R T
S T O P
V/P
3 5
– – – –
– –
– –
–
– –
–
–
:
:
– –
– – – –
– –
– –
–
– –
–
–
:
:
– –
– – – –
– –
– –
–
– –
–
–
:
:
– –
– – – –
– –
– –
–
– –
–
–
:
:
– –
– – – –
– –
– –
–
– –
–
–
–
–
–
–
–
–
–
–
–
–
:
:
– –
– – – –
– –
– –
–
– –
–
–
:
:
– –
– – – –
– –
– –
–
– –
–
–
–
–
:
:
:
E X I T
MENU
continued
Click on the first or last page to see other SLV-SE740B / SLV-SE740D / SLV-SE740E / SLV-SE740G / SLV-SE740I / SLV-SE740N / SLV-SE747E / SLV-SE840B / SLV-SE840D / SLV-SE840E / SLV-SE840G / SLV-SE840N / SLV-SX740D / SLV-SX740E / SLV-SX740N service manuals if exist.