Sony SLV-SE740B / SLV-SE740D / SLV-SE740E / SLV-SE740G / SLV-SE740I / SLV-SE740N / SLV-SE747E / SLV-SE840B / SLV-SE840D / SLV-SE840E / SLV-SE840G / SLV-SE840N / SLV-SX740D / SLV-SX740E / SLV-SX740N Service Manual ▷ View online
2-14
2-3-15 Disk S, T Reel Removal
1) Lift the Disk S, T Reel 1, 2.
Fig. 2-25 Disk S, T Reel Removal
2-3-16 Holder Clutch Ass’y Removal
1) Remove the Washer Slit 1.
2) Lift the Holder Clutch Ass’y 2.
2) Lift the Holder Clutch Ass’y 2.
Note:
When you reinstall Holder Clutch Ass’y
1) Check the condition of spring as shown in detail A.
2) Don't push Holder Clutch Ass’y down with excessive force Just
2) Don't push Holder Clutch Ass’y down with excessive force Just
insert Holder Clutch Ass’y into post center with dead force and
Rotate it smoothly.
Be sure to confirm that spring is in the slit of Gear Center Ass’y as
shown in detail B.
Rotate it smoothly.
Be sure to confirm that spring is in the slit of Gear Center Ass’y as
shown in detail B.
Fig. 2-26 Holder Clutch Ass’y Removal
1
DISK S REEL
2
DISK T REEL
1
WASHER SLIT
2
HOLDER CLUTCH ASS`Y
DETAIL A
<BAD>
SPRING
<GOOD>
<BAD>
SPRING
<GOOD>
DETAIL B
2-15
2-3-17 Lever Up Down Ass’y, Gear Center
Ass’y Removal
1) Remove the 2 hooks in the direction of arrow as shown Fig. 2-26
and lift the Lever Up Down Ass’y 1.
2) Lift the Gear Center Ass’y 2.
Assembly:
1) Insert the Lever Up Down Ass’y 1 in the rectangular holes on
Main Base as shown in Fig 2-28.
2) Lift the Lever Up Down Ass’y 1 about 35
°
.
(Refer to Fig 2-28)
3) Insert Ring of the Gear Center Ass’y 2 in the Guide of the Lever
3) Insert Ring of the Gear Center Ass’y 2 in the Guide of the Lever
Up Down Ass’y 1.
4) Insert the Gear Center Ass’y 2 in the post on Main Base.
5) Push down the Lever Up Down Ass’y 1 for locking of the Hook.
5) Push down the Lever Up Down Ass’y 1 for locking of the Hook.
Note:
1) Take care not to separate and sentence does not mark sense.
2) Be sure to confirm that Ring of the Gear Center Ass’y 2 is in the
2) Be sure to confirm that Ring of the Gear Center Ass’y 2 is in the
Guide of the Lever Up Down Ass’y 1 after finishing assembly of
Lever Up Down Ass’y 1 and Gear Center Ass’y 2.
Lever Up Down Ass’y 1 and Gear Center Ass’y 2.
Fig. 2-27 Lever Up Down Ass’y Removal
Fig. 2-28 Lever Up Down Ass’y Removal
2-3-18 Guide Cassette Door Removal
1) Lift the Hook [A].
2) Rotate the Guide Cassette Door 1 in the direction of arrow.
2) Rotate the Guide Cassette Door 1 in the direction of arrow.
Note:
After reinstalling the Guide Cassette Door 1 sure the Hook
[A].
Fig. 2-29 Guide Cassette Door Removal
1
LEVER UP DOWN ASS`Y
2
GEAR CENTER ASS`Y
MAIN BASE
LEVER UP DOWN ASS'Y
GUIDE
GEAR CENTER ASS'Y
RING
GEAR
POST
POST
HOOK
35
1
GUIDE CASSETTE DOOR
HOOK [A]
2-16
2-3-19 Lever Unit Pinch Ass’y, Plate Joint,
Spring Pinch Drive Removal
1) Lift the Unit Pinch Ass’y 1.
2) Remove the Plate Joint 2 from Lever Pinch Drive.
3) Remove the Spring Pinch Drive 3.
2) Remove the Plate Joint 2 from Lever Pinch Drive.
3) Remove the Spring Pinch Drive 3.
Note:
1) Take extreme care not to touch the grease on the Roller Pinch.
2) When reinstalling, be sure to apply grease on the post pinch roller.
2) When reinstalling, be sure to apply grease on the post pinch roller.
Fig. 2-30 Lever Unit Pinch Ass’y, Plate Joint,
Spring Pinch Drive Removal
2-3-20 Lever #9 Guide Ass’y Removal
1) Remove the Spring #9 Guide 1.
2) Lift the Spring #9 Guide Ass’y 2 in the direction of arrow “A”.
2) Lift the Spring #9 Guide Ass’y 2 in the direction of arrow “A”.
Note:
1) Take extreme care not to get grease on the tape Guide Post.
2) After reinstalling, check the bottom side of the Post #9 Guide to
2) After reinstalling, check the bottom side of the Post #9 Guide to
the top side of Main Base.
Fig. 2-31 Lever #9 Guide Ass’y Removal
3
SPRING PINCH DRIVE
1
LEVER UNIT PINCH ASS`Y
2
PLATE JOINT
1
SPRING #9 GUIDE
2
LEVER #9 GUIDE ASS`Y
"A"
"B"
2-17
2-3-21 FE Head Removal
1) Remove the screw 1.
2) Lift the FE Head 2.
2) Lift the FE Head 2.
Fig. 2-32 FE Head Removal
2-3-22 ACE Head Removal
1) Pull out the FPC from connector of ACE Head Ass’y 2.
2) Remove the screw 1.
3) Lift the ACE Head Ass’y 2.
2) Remove the screw 1.
3) Lift the ACE Head Ass’y 2.
Fig. 2-33 ACE Head Removal
1
FE HEAD
1
SCREW
2
HEAD ACE ASS`Y
Click on the first or last page to see other SLV-SE740B / SLV-SE740D / SLV-SE740E / SLV-SE740G / SLV-SE740I / SLV-SE740N / SLV-SE747E / SLV-SE840B / SLV-SE840D / SLV-SE840E / SLV-SE840G / SLV-SE840N / SLV-SX740D / SLV-SX740E / SLV-SX740N service manuals if exist.