Sony SLV-D900E / SLV-D900G Service Manual ▷ View online
1-8
36
Recording TV programmes
In order to get an accurate remaining time indication, be sure “Tape Select” in the
“VIDEO FUNCTION SETUP” menu is set according to the tape type you use (see
page 90).
“VIDEO FUNCTION SETUP” menu is set according to the tape type you use (see
page 90).
Maximum Recording Time
To watch another TV programme while recording
To watch a DVD while recording
To save a recording
To prevent accidental erasure, break
off the safety tab as illustrated. To
record on the tape again, cover the tab
hole with adhesive tape.
off the safety tab as illustrated. To
record on the tape again, cover the tab
hole with adhesive tape.
Tips
• To select a programme position, you can
• To select a programme position, you can
use the number buttons on the remote commander. For two-digit numbers, for example, press
2 and 3 to select “PR 23.”
2 and 3 to select “PR 23.”
• If you connect additional equipment to a LINE connector or jack, you can select the input
signal using the INPUT SELECT or PROG +/– buttons.
• The DISPLAY information appears on the TV screen indicating information about the tape,
but the information will not be recorded on the tape.
• If you do not want to watch TV while recording, you can turn off the TV. When using a
decoder, make sure to leave it on.
Tape Length
SP
LP
E-180
3 hrs
6 hrs
E-240
4 hrs
8 hrs
E-260
4 hrs 20 mins
8 hrs 40 mins
E-300
5 hrs
10 hrs
1
Press TV/VIDEO to display “TV” in the display window.
2
Select another channel on the TV.
1
Press SELECT DVD to control the DVD player.
2
Press
Z and place the disc on the disc tray.
3
Press
H.
The disc tray closes and the DVD player starts playback. The TV screen will
automatically change to the DVD playback screen.
automatically change to the DVD playback screen.
Safety tab
37
Recording TV programmes
Ba
sic
O
p
sic
O
p
er
at
at
ions
Notes
• The DISPLAY information does not appear during still (pause) mode or slow-motion
• The DISPLAY information does not appear during still (pause) mode or slow-motion
playback.
• If a tape has portions recorded in both PAL and NTSC systems, the time counter reading will
not be correct. This discrepancy is due to the difference between the counting cycles of the
two video systems.
two video systems.
• When you insert a non-standard commercially available tape, the remaining time may not be
correct.
• The remaining time is intended for rough measurement only.
• About 30 seconds after the tape begins playback, the tape remaining time will be displayed.
• You cannot record a DVD to a VCR tape.
• To watch a TV programme during video recording, stop disc playback.
• About 30 seconds after the tape begins playback, the tape remaining time will be displayed.
• You cannot record a DVD to a VCR tape.
• To watch a TV programme during video recording, stop disc playback.
38
Recording TV programmes using the VIDEO Plus+
®
system
Recording TV programmes using the
VIDEO Plus+
VIDEO Plus+
®
system
The VIDEO Plus+ system is the feature that
simplifies programming the VCR to make
timer recordings. Just enter the PlusCode
number listed in the TV programme guide.
The date, times, and programme position of
that programme are set automatically. You
can preset a total of eight programmes,
including settings made with other timer
methods.
simplifies programming the VCR to make
timer recordings. Just enter the PlusCode
number listed in the TV programme guide.
The date, times, and programme position of
that programme are set automatically. You
can preset a total of eight programmes,
including settings made with other timer
methods.
Before you start...
• Check that the DVD-VCR clock is set to
the correct time.
• Turn on the DVD-VCR and your TV.
• Set your TV to the video channel so that
• Set your TV to the video channel so that
the signal from the player appears on the
TV screen.
TV screen.
• Press SELECT VIDEO to control the
VCR.
• To record from a satellite or digital tuner,
turn it on.
• Insert a tape with its safety tab in place.
Make sure the tape is longer than the total
recording time.
recording time.
• Set “TIMER METHOD” to
“VIDEOPLUS” or “VARIABLE” in the
“USER SET” menu (see page 95).
“USER SET” menu (see page 95).
SET UP
INPUT
SELECT
SELECT
V/v/B/b
ENTER
ENTER
?/1
x
O RETURN
CLEAR
TIMER
SELECT VIDEO
39
Recording TV programmes using the VIDEO Plus+
®
system
Ba
sic
O
p
sic
O
p
er
at
at
ions
1
Press
TIMER.
• When you set “TIMER METHOD” to
“VARIABLE”:
The “TIMER METHOD” menu appears on
the TV screen. Press
The “TIMER METHOD” menu appears on
the TV screen. Press
V/v to select
“VIDEOPLUS,” then press ENTER.
• When you set “TIMER METHOD” to
“VIDEOPLUS”:
The “VIDEOPLUS” menu appears on the
TV screen.
The “VIDEOPLUS” menu appears on the
TV screen.
2
Press the number buttons to enter the PlusCode
number.
number.
If you make a mistake, press CLEAR and re-
enter the correct number.
enter the correct number.
You can also press
B to delete the last entered
number.
3
Press ENTER.
The date, start and stop times, programme
position, tape speed and PDC (Programme
Delivery Control) setting appear on the TV
screen.
position, tape speed and PDC (Programme
Delivery Control) setting appear on the TV
screen.
• If “– –” appears in the “PR” (programme)
column (this may happen for local
broadcasts), you have to set the appropriate programme position
manually.
Press
broadcasts), you have to set the appropriate programme position
manually.
Press
V/v to select the desired programme position.
• To record from other equipment connected to one or more of the LINE
inputs, press INPUT SELECT to display the connected line in the “PR”
position.
position.
You will only have to do this operation once for the referred channel. The
VCR will then store your setting.
VCR will then store your setting.
If the information is incorrect, press CLEAR to cancel the setting.
ENTER
SUBTITLE/
TIMER
RETURN
T I M E R M E T H O D
S T A N D A R D
ENTER
vV
V I D E O P L U S
COD E: 0 – 9
C O D E
– – – – – – – – –
RETURN
ENTER
V I D E O P L U S
C O R R E C T :
B
1
2
3
4
5
6
7
8
9
0
CLEAR
COD E: 0 – 9
C O D E
1 2 3 4 – – – – –
RETURN
ENTER
V I D E O P L U S
C O R R E C T :
B
INPUT
SELECT
ENTER
CLEAR
PR DAY
START
STOP
– –
–
– – –
: – –
– – –
– –
–
– – –
: – –
– – –
– –
–
– – –
: – –
– – –
– –
–
– – –
: – –
– – –
– –
–
– – –
: – –
– – –
– –
–
– – –
: – –
– – –
– –
–
–
–
–
–
–
–
– – – –
–
–
–
–
–
–
– : – –
– – –
RETURN
CLEAR
3 5
S 2
A 9 1 9 :
:
:
:
:
:
:
–
–
–
–
–
–
–
–
–
–
–
–
–
– :
0 0
0 0
0
2
:
V/P
–
–
–
–
–
–
–
–
SP
–
–
–
–
–
–
–
vV
B
b
continued
1-9
40
Recording TV programmes using the VIDEO Plus+
®
system
To stop recording
To stop the DVD-VCR while recording, press SELECT VIDEO and then press
x.
Daily/weekly recording
In step 4 above, press
v to select the recording pattern. Each time you press v, the
indication changes as shown below. Press
V to change the indication in reverse order.
today
t DLY (Monday to Sunday) t W-SA (every Saturday) ..... t
W-SU (every Sunday)
t 1 month later t (dates count down) t today
Timer recording with PDC signals
Some broadcast systems transmit PDC signals with their TV programmes. These
signals ensure that your timer recordings are made regardless of broadcast delays,
early starts, or broadcast interruptions.
signals ensure that your timer recordings are made regardless of broadcast delays,
early starts, or broadcast interruptions.
To use the PDC function, set V/P to ON in step 4 above. You can also use the PDC
function for a source connected to one or more of the LINE inputs.
function for a source connected to one or more of the LINE inputs.
4
If you want to change the date, tape speed and
the PDC setting:
the PDC setting:
1
Press
B/b to select the item you want to
change.
2
Press
V/v to reset it.
• To record the same programme every day or
the same day every week, see “Daily/weekly
recording” on page 40.
recording” on page 40.
• To use the PDC function, set V/P to ON. For details about the PDC
function, see “Timer recording with PDC signals” on page 40.
5
Press
O RETURN to confirm the setting.
6
Press
O RETURN to exit the menu.
7
Press
?/1 to turn off the DVD-VCR.
The
indicator appears in the display window and the VCR stands by for
recording.
To record from other equipment, leave the connected equipment switched
on.
on.
ENTER
PR DAY
START
STOP
– –
–
– – –
: – –
– – –
– –
–
– – –
: – –
– – –
– –
–
– – –
: – –
– – –
– –
–
– – –
: – –
– – –
– –
–
– – –
: – –
– – –
– –
–
– – –
: – –
– – –
– –
–
–
–
–
–
–
–
– – – –
–
–
–
–
–
–
– : – –
– – –
RETURN
CLEAR
3 5
S 2
A 9 1 9 :
:
:
:
:
:
:
–
–
–
–
–
–
–
–
–
–
–
–
–
– :
0 0
0 0
0
2
:
V/P
–
–
–
–
–
–
–
SP
–
–
–
–
–
–
–
vV
B
b
–
RETURN
RETURN
41
Recording TV programmes using the VIDEO Plus+
®
system
Ba
sic
O
p
sic
O
p
er
at
at
ions
To record satellite broadcasts
If you connect the satellite tuner and the VCR, you can record satellite programmes.
To watch another TV programme after setting the timer
To watch a DVD after setting the timer
Tips
• To set the channel, you can also use the
• To set the channel, you can also use the
V/v or number buttons.
• If the
indicator appears, this means that the VCR is currently recording this programme.
• You can also do the following tasks while the VCR is recording:
– Reset the counter (page 32).
– Display tape information on the TV screen (page 35).
– Display tape information on the TV screen (page 35).
To use the Auto Tape Speed function
In step 4 above, press
v to select “AUTO.” When you are recording a programme in
the SP mode and the remaining tape length becomes shorter than the recording time,
the recording tape speed is automatically changed to the LP mode. Note that some
noise will appear on the picture when the tape speed is changed. To operate this
function correctly, the “Tape Select” setting in the “VIDEO FUNCTION SETUP”
menu must be accurate (see page 90).
the recording tape speed is automatically changed to the LP mode. Note that some
noise will appear on the picture when the tape speed is changed. To operate this
function correctly, the “Tape Select” setting in the “VIDEO FUNCTION SETUP”
menu must be accurate (see page 90).
1
Turn on the satellite tuner.
2
On the satellite tuner, select the satellite programme for which you want to make
a timer setting.
a timer setting.
3
Keep the satellite tuner turned on until the VCR finishes recording the satellite
programme for which you have made a timer setting.
programme for which you have made a timer setting.
1
Press TV/VIDEO to display “TV” in the display window.
2
If your TV is connected to the VCR using A/V connections, set the TV to the
TV’s aerial input; if not, skip this step.
TV’s aerial input; if not, skip this step.
3
Select another channel on the TV.
1
Press SELECT DVD to control the DVD player.
2
Press
Z and place the disc on the disc tray.
3
Press
H.
The disc tray closes and the DVD player starts playback. The TV screen will
automatically change to the DVD playback screen.
automatically change to the DVD playback screen.
continued
42
Recording TV programmes using the VIDEO Plus+
®
system
Tips
• To set the line input video source, you can also use the INPUT SELECT button.
• You can set the extended time for the VIDEO Plus+ setting by 10, 20, 30, 40, 50, or 60
• To set the line input video source, you can also use the INPUT SELECT button.
• You can set the extended time for the VIDEO Plus+ setting by 10, 20, 30, 40, 50, or 60
minutes. Set “VIDEOPLUS EXTEND” in the “USER SET” menu to the desired extended
time on page 95.
time on page 95.
• To check, change, or cancel the programme setting, see “Checking/changing/cancelling timer
settings” on page 47.
Notes
• If the PDC signal is too weak or the broadcasting station failed to transmit PDC signals, the
• If the PDC signal is too weak or the broadcasting station failed to transmit PDC signals, the
VCR will start recording at the set time without using the PDC function.
• The
indicator flashes in the display window when you press
?/1 with no tape inserted.
• When you set “TIMER METHOD” to “STANDARD” in the “USER SET” menu, the
“VIDEOPLUS” menu does not appear on the TV screen. Select “VIDEOPLUS” or
“VARIABLE.”
“VARIABLE.”
43
Recording TV programmes using the timer
Ba
sic
O
p
sic
O
p
er
at
at
ions
Recording TV programmes using the timer
You can preset up to eight programmes at a
time.
time.
Before you start…
• Check that the DVD-VCR clock is set to
the correct time.
• Turn on the DVD-VCR and your TV.
• Switch the input selector on your TV so
• Switch the input selector on your TV so
that the signal from the player appears on
the TV screen.
the TV screen.
• Press SELECT VIDEO to control the
VCR.
• To record from a satellite or digital tuner,
turn it on.
• Insert a tape with its safety tab in place.
Make sure the tape is longer than the total
recording time.
recording time.
• If the DVD player is in play mode, you
cannot display the “SETUP MENU.” Stop
the DVD playback.
the DVD playback.
• Set “TIMER METHOD” to
“STANDARD” or “VARIABLE” in the
“USER SET” menu (see page 95).
“USER SET” menu (see page 95).
SET UP
INPUT
SELECT
SELECT
V/v/B/b
ENTER
ENTER
?/1
x
O RETURN
CLEAR
TIMER
SELECT VIDEO
continued
1-10
44
Recording TV programmes using the timer
1
Press
TIMER.
• When you set “TIMER METHOD” to
“VARIABLE”:
The “TIMER METHOD” menu appears on
the TV screen. Press
The “TIMER METHOD” menu appears on
the TV screen. Press
V/v to select
“STANDARD”, then press ENTER.
• When you set “TIMER METHOD” to
“STANDARD”:
The “TIMER PROGRAMMING” menu
appears on the TV screen.
The “TIMER PROGRAMMING” menu
appears on the TV screen.
2
Set the date, start and stop times, programme
position, tape speed and PDC function:
position, tape speed and PDC function:
1
Press
b to select each item in turn.
2
Press
V/v to set each item.
To correct a setting, press
B to return to that
setting and reset.
• To record the same programme every day or
the same day every week, see “Daily/weekly recording” on page 45.
• To use the PDC function, set V/P to ON. For details about the PDC
function, see “Timer recording with PDC signals” on page 40.
• To record from other equipment connected to one or more of the LINE
inputs, press INPUT SELECT to display the connected line in the “PR”
position.
position.
3
Press
O RETURN to confirm the setting.
The
indicator appears in the display window.
To enter another setting, press
V/v to select the next row and repeat step 2.
Press CLEAR to cancel the setting.
4
Press
O RETURN to exit the menu.
5
Press
?/1 to turn off the DVD-VCR.
The
indicator appears in the display window and the VCR stands by for
recording.
To record from other equipment, leave the connected equipment switched
on.
on.
SUBTITLE/
TIMER
ENTER
RETURN
T I M E R M E T H O D
S T A N D A R D
V I D E O P L U S
ENTER
vV
PR DAY
START
STOP
– –
–
– – –
: – –
– – –
– –
–
– – –
: – –
– – –
– –
–
– – –
: – –
– – –
– –
–
– – –
: – –
– – –
– –
–
– – –
: – –
– – –
– –
–
– – –
: – –
– – –
– –
–
–
–
–
–
–
–
– – – –
–
–
–
–
–
–
– : – –
– – –
RETURN
CLEAR
:
:
:
:
:
:
–
–
–
–
–
–
–
–
–
–
–
–
–
– :
– –
–
– – –
: – –
– – –
–
–
:
– –
V/P
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
vV
B
b
ENTER
INPUT
SELECT
PR
– –
–
– – –
: – –
– – –
– –
–
– – –
: – –
– – –
– –
–
– – –
: – –
– – –
– –
–
– – –
: – –
– – –
– –
–
– – –
: – –
– – –
– –
–
– – –
: – –
– – –
– –
–
–
–
–
–
–
–
– – – –
–
–
–
–
–
–
– : – –
– – –
RETURN
CLEAR
:
:
:
:
:
:
–
–
–
–
–
–
–
–
–
–
–
–
–
– :
3 5
–
– – –
: – –
– – –
–
–
:
– –
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
vV
B
b
DAY
START
STOP
V/P
RETURN
CLEAR
RETURN
45
Recording TV programmes using the timer
Ba
sic
O
p
sic
O
p
er
at
at
ions
To stop recording
To stop the DVD-VCR while recording, press SELECT VIDEO and then press
x.
Daily/weekly recording
In step 2 above, press
v to select the recording pattern. Each time you press v, the
indication changes as shown below. Press
V to change the indication in reverse order.
today
t DLY (Monday to Sunday) t W-SA (every Saturday) ..... t
W-SU (every Sunday)
t 1 month later t (dates count down) t today
To use the Auto Tape Speed function
In step 2 above, press
v to select “AUTO.” When you are recording a programme in
the SP mode and the remaining tape length becomes shorter than the recording time,
the recording tape speed is automatically changed to the LP mode. Note that some
noise will appear on the picture when the tape speed is changed. To operate this
function correctly, the “Tape Select” setting in the “VIDEO FUNCTION SETUP”
menu must be accurate (see page 90).
the recording tape speed is automatically changed to the LP mode. Note that some
noise will appear on the picture when the tape speed is changed. To operate this
function correctly, the “Tape Select” setting in the “VIDEO FUNCTION SETUP”
menu must be accurate (see page 90).
Tips
• To set the line input video source, you can also use the INPUT SELECT button.
• To set the line input video source, you can also use the INPUT SELECT button.
• Even if you set
“
TIMER METHOD
”
to
“
VIDEOPLUS
”
in the
“
USER SET
”
menu, you can
set the timer manually. Press SET UP to select TIMER PROGRAMMING, then go to step 2.
• To check, change, or cancel the programme setting, see “Checking/changing/cancelling timer
settings” on page 47.
Notes
• When setting the timer with PDC signals, enter the start times exactly as indicated in the TV
• When setting the timer with PDC signals, enter the start times exactly as indicated in the TV
programme guide. Otherwise, the PDC function will not work.
• If the PDC signal is too weak or the broadcasting station failed to transmit PDC signals, the
VCR will start recording at the set time without using the PDC function.
• The
indicator flashes in the display window when you press
?/1 with no tape inserted.
To watch another TV programme after setting the timer
1
Press TV/VIDEO to display “TV” in the display window.
2
If your TV is connected to the VCR using A/V connections, set the TV to the
TV’s aerial input; if not, skip this step.
TV’s aerial input; if not, skip this step.
3
Select another channel on the TV.
continued
46
Recording TV programmes using the timer
To watch a DVD after setting the timer
Tips
• To set the channel, you can also use the
• To set the channel, you can also use the
V/v or number buttons.
• If the
indicator appears, this means that the VCR is currently recording this programme.
• You can also do the following tasks while the VCR is recording:
– Reset the counter (page 32).
– Display tape information on the TV screen (page 35).
– Display tape information on the TV screen (page 35).
1
Press SELECT DVD to control the DVD player.
2
Press
Z and place the disc on the disc tray.
3
Press
H.
The disc tray closes and the DVD player starts playback. The TV screen will
automatically change to the DVD playback screen.
automatically change to the DVD playback screen.
47
Checking/changing/cancelling timer settings
Ba
sic
O
p
sic
O
p
er
at
at
ions
Checking/changing/cancelling timer
settings
settings
Before you start…
• Check that the DVD-VCR clock is set to
the correct time.
• Turn on the DVD-VCR and your TV.
• Switch the input selector on your TV so
• Switch the input selector on your TV so
that the signal from the player appears on
the TV screen.
the TV screen.
• Press SELECT VIDEO to control the
VCR.
• To record from a satellite or digital tuner,
turn it on.
• Insert a tape with its safety tab in place.
Make sure the tape is longer than the total
recording time.
recording time.
• If the DVD player is in play mode, you
cannot display the “SETUP MENU.” Stop
the DVD playback.
the DVD playback.
• Set “TIMER METHOD” to
“STANDARD” or “VARIABLE” in the
“USER SET” menu (see page 95).
“USER SET” menu (see page 95).
1
Press SET UP when the DVD player is in stop
mode.
mode.
The “SETUP MENU” appears.
SET UP
V/v/B/b
ENTER
ENTER
?/1
O RETURN
CLEAR
SELECT
VIDEO
VIDEO
SET UP
DVD SETUP
RETURN
RETURN
SETUP MENU
Vv b
B
ENTER
continued
1-11
48
Checking/changing/cancelling timer settings
When the timer settings overlap
The programme that starts first has priority and the second programme starts
recording only after the first programme has finished. If the programmes start at the
same time, the programme listed first in the menu has priority.
recording only after the first programme has finished. If the programmes start at the
same time, the programme listed first in the menu has priority.
2
Press
V/v/B/b to select
(TIMER PROGRAMMING), then press
ENTER.
• If you want to change a setting, go on to the next step.
• If you do not need to change the settings, press
O RETURN repeatedly
to exit the menu.
3
Press
V/v to select setting you want to change
or cancel.
• To change the setting, press
B/b to flash the
item you want to change, and press
V/v to
change it.
• To cancel the setting, press CLEAR.
4
Press
O RETURN to confirm the setting.
If any settings remain, turn off the VCR to return to recording standby.
ENTER
RETURN
ENTER
CLEAR
PR DAY
START
STOP
– –
–
– – –
: – –
– – –
– –
–
– – –
: – –
– – –
– –
–
– – –
: – –
– – –
– –
–
– – –
: – –
– – –
– –
–
– – –
: – –
– – –
–
–
–
–
–
–
–
–
–
–
RETURN
CLEAR
:
:
:
:
:
–
–
–
–
–
–
–
–
–
–
V/P
–
–
–
–
–
–
–
–
3 5
0 : 0 0
1 : 0 0 SP
2 0
: 0 0
: 3 0 LP
6 0
: 3 0
: 0 0 AUTO
MO30
WE02
TU30
WE02
TU30
2
2
2
0
2
2
3
2
2
2
–
–
–
–
–
vV
B
b
RETURN
about 20 seconds
will be cut off
Programme 1
Programme 2
about 20 seconds will be cut off
Programme 1
Programme 2
49
A/V Receiver hookup
Ad
v
v
a
n
ce
d Hoo
d Hoo
kups
Advanced Hookups
A/V Receiver hookup
A Use this hookup if your A/V receiver has a Dolby* Surround (Pro
Logic) decoder and 3 to 6 speakers
You can enjoy the Dolby Surround effects only when playing Dolby Surround audio
or multi-channel audio (Dolby Digital) discs.
or multi-channel audio (Dolby Digital) discs.
∗ Manufactured under license from Dolby Laboratories. “Dolby,” “Pro Logic,” and the double-
D symbol are trademarks of Dolby Laboratories.
Note
• When connecting 6 speakers, replace the monaural rear speaker with a center speaker, 2 rear
• When connecting 6 speakers, replace the monaural rear speaker with a center speaker, 2 rear
speakers and a subwoofer.
A
VIDEO
AUDIO
R
L
DVD-VCR
Front (R)
Front (L)
Rear (R)
Subwoofer
l
: Signal flow
Rear (L)
Amplifier (receiver) with Dolby
Surround decoder
Surround decoder
Center
Rear (mono)
Stereo audio cord
(supplied)
(supplied)
[Speakers]
(red)
(white)
[Speakers]
to audio input
(white)
(red)
to LINE OUT L/R (AUDIO)
continued
50
A/V Receiver hookup
B Use this hookup if your A/V receiver has a Dolby Digital, MPEG audio
or DTS* decoder, a digital input jack and 6 speakers
This connection will allow you to use the Dolby Digital, MPEG audio or DTS
decoder function of your AV amplifier (receiver). You are not able to enjoy the
surround sound effects of this player. You must make connections using
decoder function of your AV amplifier (receiver). You are not able to enjoy the
surround sound effects of this player. You must make connections using
and
.
∗ “DTS” and “DTS Digital Out” are trademarks of Digital Theater Systems, Inc.
Note
• After you have completed the connection, be sure to set “Dolby Digital” to “Dolby Digital”
• After you have completed the connection, be sure to set “Dolby Digital” to “Dolby Digital”
and “DTS” to “On” in “Audio Setup” (page 52). If your AV amplifier (receiver) has an
MPEG audio decoder function, set “MPEG” to “MPEG” (page 52). Otherwise, no sound or a
loud noise will come from the speakers.
MPEG audio decoder function, set “MPEG” to “MPEG” (page 52). Otherwise, no sound or a
loud noise will come from the speakers.
B-1
B-2
COAXIAL
OPTICAL
DIGITAL AUDIO OUT
B-2
B-1
VIDEO
AUDIO
R
L
Front (R)
Front (L)
Rear (R)
AV amplifier (receiver) having a
decoder
decoder
Subwoofer
Center
[Speakers]
DVD-VCR
[Speakers]
Rear (L)
to coaxial or optical
digital input
digital input
and
Coaxial digital cord
(not supplied)
(not supplied)
l
: Signal flow
Stereo audio cord
(supplied)
(supplied)
(red)
(white)
to audio input
(white)
(red)
to LINE OUT L/R (AUDIO)
or
to DIGITAL OUT
(COAXIAL or OPTICAL)
(COAXIAL or OPTICAL)
Optical digital cord
(not supplied)
Remove jack cap
before connecting
(not supplied)
Remove jack cap
before connecting
51
S-Video hookup
Ad
v
v
a
n
ce
d Hoo
d Hoo
kups
S-Video hookup
Make audio connections using the LINE OUT AUDIO L/R jacks or DIGITAL AUDIO OUT
(OPTICAL or COAXIAL) jacks on the right side of the DVD-VCR when you use S-VIDEO
hookup.
(OPTICAL or COAXIAL) jacks on the right side of the DVD-VCR when you use S-VIDEO
hookup.
Use this hookup if your TV has an S VIDEO input jack
• Connect an S VIDEO cord (not supplied). You will enjoy high quality images.
Notes
• Set “DVD Video Out” to “S-Video” in the “SCREEN SETUP” menu (page 55) to view
• Set “DVD Video Out” to “S-Video” in the “SCREEN SETUP” menu (page 55) to view
pictures from the S VIDEO jack.
• The connection using S VIDEO OUT jack is only for the DVD player.
INPUT
S VIDEO
l
: Signal flow
(DVD only)
TV or AV amplifier
TV
S VIDEO cord
(not supplied)
(not supplied)
DVD-VCR
Audio cord
(supplied)
(supplied)
Coaxial
digital cord
(not supplied)
digital cord
(not supplied)
Optical digital
cord (not
supplied)
Remove jack
cap before
connecting
cord (not
supplied)
Remove jack
cap before
connecting
or
or
to coaxial or optical
digital input
digital input
to audio
input
input
Click on the first or last page to see other SLV-D900E / SLV-D900G service manuals if exist.