Sony SLV-D900E / SLV-D900G Service Manual ▷ View online
2-3
Fig. 2-7 Tray Disc Removal
2-2 DVD Deck
2-2-1 Tray Disc Removal
1) Insert a Screw Driver 1 into Emergency Hole 2 and push the Slider Housing 3 in the direction arrow “A”.
2) When the Tray Disc 4 comes out a little, pull it in the direction arrow “B” by hand.
3) Pull the Tray Disc 4 to disassemble, while simultaneously pushing 2 Stoppers 5 (left, right) in the direction
2) When the Tray Disc 4 comes out a little, pull it in the direction arrow “B” by hand.
3) Pull the Tray Disc 4 to disassemble, while simultaneously pushing 2 Stoppers 5 (left, right) in the direction
arrow “C”, “D”.
"A"
1
SCREW DRIVER
2
EMERGENCY HOLE
3
SLIDER HOUSING
4
TRAY DISC
"B"
"C"
5
STOPPER
5
STOPPER
"D"
2-4
2-2-2 Ass’y P/U Deck Removal
1) Disconnect DCN2 1, DCN2 2.
2) Lift down the Assy P/U Deck 3 while simultaneously pushing 2 Hooks 4, 5 in the direction of arrow
2) Lift down the Assy P/U Deck 3 while simultaneously pushing 2 Hooks 4, 5 in the direction of arrow
“A”, “B”.
Fig. 2-8 Ass’y P/U Deck Removal
1
DCN2
5
HOOK
4
HOOK
2
DCN3
3
ASSY- P/U DECK
"A"
"B"
<Assembly Point>
SLIDER HOUSING
2-5
2-2-3 Housing Ass’y Removal
1) Remove Belt 1.
2) Push the Hook 2 in the direction arrow “A” and lift up Pulley Gear 3.
3) Push the Slider Housing 5 in the direction arrow “B” and lift up the Gear Tray 4.
4) Lift up the Slider Housing 5.
5) Remove the soldering 6 of 2 points (Red, Black).
6) Remove 2 Screws 7 and lift down the Motor Load Assy 8.
7) Push the 2 Hooks 9 bottom side in the direction arrow “C” and lift up the Housing PCB 0.
8) Push the Hooks qa and remove Deck PCB qs.
2) Push the Hook 2 in the direction arrow “A” and lift up Pulley Gear 3.
3) Push the Slider Housing 5 in the direction arrow “B” and lift up the Gear Tray 4.
4) Lift up the Slider Housing 5.
5) Remove the soldering 6 of 2 points (Red, Black).
6) Remove 2 Screws 7 and lift down the Motor Load Assy 8.
7) Push the 2 Hooks 9 bottom side in the direction arrow “C” and lift up the Housing PCB 0.
8) Push the Hooks qa and remove Deck PCB qs.
Fig. 2-9 Housing Ass’y Removal
1
BELT
3
PULLEY GEAR
4
GEAR TRAY
8
MOTOR LOAD ASSY
9
3 HOOKS
0
HOUSING PCB
qa
HOOK
6
SOLDERING
7
2 SCREWS
5
SLIDER HOUSING
2
HOOK
"A"
"B"
<Bottom Side>
"C"
"C"
"C"
2-6
2-2-4 Sub Chassis Removal
1) Remove the Soldering of Motor Feed (+, - wire) 1.
2) Remove the 4 Screws 2.
3) Lift up the Ass’y Brkt Deck 3.
2) Remove the 4 Screws 2.
3) Lift up the Ass’y Brkt Deck 3.
Fig. 2-10 Sub Chassis Removal
2
4 SCREWS
3
ASSY-BRKT DECK
1
SOLDERING OF
MOTOR FEED (+, - WIRE)
+
Click on the first or last page to see other SLV-D900E / SLV-D900G service manuals if exist.