DOWNLOAD Sony SLV-D300P (serv.man2) Service Manual ↓ Size: 13.67 MB | Pages: 123 in PDF or view online for FREE

2-9

3

CONNECTOR WAFER

2

CONNECTOR WAFER

1

CABLE FLAT

1

GEAR WORM WHEEL

1) Remove the Gear Worm wheel 1.

Fig. 2-16 Gear Worm Wheel Removal

1) Remove the Drum connecting part of Cable Flat 1 from Connector

Waffer 2.

2) Remove the Loading Motor connecting part of Cable Flat 1 from

Connector Waffer 3.

Fig. 2-17 Cable Flat Removal

2-10

1

GEAR JOINT1

2

GEAR JOINT2

3

SLIDER CAM

TIMING POINT 1

TIMING POINT 2

2

MOTOR LOADING ASS`Y

1

SCREW

1

SCREW

2

BRAKET GEAR

4

GEAR JOINT 1

3

GEAR JOINT 2

1) Remove the screw 1.
2) Remove the Motor Loading Ass’y 2.

Fig.2-18 Motor Loading Ass’y Removal

1) Remove the SCREW 1.
2) Remove the Bracket Gear 2.
3) Remove the Gear Joint 2 3.
4) Remove the Gear Joint 1 4.

1) Be sure to align dot mark of Gear Joint 1 1 with dot mark of

Gear Joint 2 2 as shown Fig 2-20.
(Refer to Timing point1)

2) Confirm the Timing Point 2 of the Gear Joint 2 2  and Slider

Cam 3.

Fig. 2-19 Bracket Gear, Gear Joint 1,2 Removal

Fig. 2-20 Gear Joint 1,2 Assembly

2-11

1) Remove the Belt Pulley. (Refer to Fig. 2-38)
2) Remove the Gear Loading Drive 1 after releasing Hook [A] in

the direction arrow as shown in detail drawing.

3) Remove the Slider Cam 2.
4) Remove the Lever Load 3, Link Load 5 & Lever Load 4, Link

Load 6.

Fig. 2-21 Gear Loading Drive, Slider Cam,

Lever T, S Load Ass’y Removal

1) When reinstalling, be sure to align dot of Lever Load T Ass’y 1

with dot of Lever Load S Ass’y 2 as shown in drawing, (Refer to
Timing Point 1).

2) Insert the Pin A,B,C,D into the Slider Cam 3 hole,
3) Be sure to align dot of Lever Load T 1 and dot of Gear Loading

Drive 4, (Refer to Timing Point 2).

4) Aline dot of Gear Loading drive 4 with mark of Slider Cam 3

as shown in drawing (Refer to Timing Point 3).

Fig. 2-22 Gear Loading Drive, Slider Cam,

Lever Load S, T Ass’y Assembly

1

GEAR LOADING DRIVE

5

LINK LOAD S

3

LEVER LOAD S

4

LEVER LOAD T

6

LINK LOAD T

2

SLIDE CAM

HOOK(A)

2

LEVER LOAD S 

1

LEVER LOAD T 

LEVER LOAD S 

LEVER LOAD T 

PIN A

PIN C

PIN B

PIN D

3

SLIDER CAM

TIMING POINT 2

TIMING POINT 1

TIMING POINT 3

2-12

1

SPRING TENTION LEVER

STOPPER

MARK[B]

"A"

2

LEVER TENTION ASS`Y

3

BAND BRAKE ASS`Y

1) Remove the Lever Pinch Drive 1, Lever Tension Drive 2.

Fig. 2-23 Lever Pinch Drive,

Lever Tension Drive Removal

1) Remove the Lever Brake S Ass’y (Refer to Fig 2-25).
2) Remove the Spring Tension Lever 1.
3) Rotate stopper of Main Base in the direction of arrow “A”.
4) Lift the Lever Tension Ass’y 2 & Band brake
Ass’y 3.

1) When replacing the Lever Tension Ass’y 2, be sure to apply Grease

on the post,

2) Take care not to touch stain on the felt side, and not to be folder

and broken Band brake Ass’y

3) After Lever Tension Ass’y seated, Rotate stopper of Main Base to

the Mark[B].

Fig. 2-24 Lever Tension Ass’y,

Band Brake Ass’y Removal

1

LEVER PINCH DRIVE 

2

LEVER TENSION DRIVE