Sony XBR-65HX929 Service Manual ▷ View online
11
D:\Cmeng's JOB\SONY TV\SY0390_W4 (Rev-4)\4270401131_US\US03STU.fm
KDL-60/55/46NX720/55/46HX820/XBR-65/55/46HX929
4-270-401-13(1)
Getting Started
Detaching the Table-Top
Stand from the TV
Stand from the TV
To detach the Table-Top Stand from the
TV, remove the screws
TV, remove the screws
fixed in step 2.
For KDL-60NX720, be sure to remove the
screws
screws
for detaching the head when the
Table-Top Stand is not attached to the TV.
For XBR-65HX929, be sure to remove the
screws
For XBR-65HX929, be sure to remove the
screws
at the head of the Table-Top
Stand.
~
• Do not remove the Table-Top Stand for any
reason other than to install corresponding
accessories on the TV.
accessories on the TV.
• When removing the Table-Top Stand from the
TV, lay the display face down on a stable work
surface that is larger than the TV.
surface that is larger than the TV.
• To prevent damaging the surface of the LCD
display, make sure to place a soft cloth on the
work surface.
work surface.
• When installing the TV on a wall, remove the
screws from the rear of the TV. The screws and
number of screws depends on the TV model.
(They are fastened in the screw holes for wall
mounting.) Be sure to store the removed
screws in a safe place, keeping them away
from children.
number of screws depends on the TV model.
(They are fastened in the screw holes for wall
mounting.) Be sure to store the removed
screws in a safe place, keeping them away
from children.
• When attaching the Table-Top Stand again, be
sure to fasten the screws (previously removed)
to the original holes on the rear of the TV.
to the original holes on the rear of the TV.
2: Adjusting the viewing
angle of the TV
This TV can be adjusted within the angles
as illustrated.
as illustrated.
Angle adjustment (Swivel)
(except XBR-65HX929/
KDL-60NX720)
(except XBR-65HX929/
KDL-60NX720)
~
• When adjusting the angle, hold the stand with
one hand to avoid having the stand slip or TV
tip over.
tip over.
Angle adjustment (Tilt)
(except XBR-65HX929/
KDL-60NX720)
(except XBR-65HX929/
KDL-60NX720)
Head
Soft cloth
20°
20°
20°
20°
0° - 6°
12
D:\Cmeng's JOB\SONY TV\SY0390_W4 (Rev-4)\4270401131_US\US03STU.fm
KDL-60/55/46NX720/55/46HX820/XBR-65/55/46HX929
4-270-401-13(1)
3: Connecting the TV
~
• Use an antenna cable connector no greater than
14 mm thick.
• Use an HDMI cable connector within 12 mm
(thickness) × 21 mm (width).
Shown with a Set Top Box with HDMI
connection
connection
B XBR-65HX929
B Except XBR-65HX929
Recommendation of the F type plug
The one based on the following drawing is
recommended about the F type plug.
Projection of the inner wire from the
connection part must be less than 1.5 mm.
recommended about the F type plug.
Projection of the inner wire from the
connection part must be less than 1.5 mm.
Set Top Box
Set Top Box
1.5 mm max.
(Reference drawing of the F type plug)
13
D:\Cmeng's JOB\SONY TV\SY0390_W4 (Rev-4)\4270401131_US\US03STU.fm
KDL-60/55/46NX720/55/46HX820/XBR-65/55/46HX929
4-270-401-13(1)
Getting Started
Shown with a Set Top Box with
COMPONENT connection
COMPONENT connection
B XBR-65HX929
B Except XBR-65HX929
Set Top Box
Set Top Box
Video/Component Adapter
(supplied)
(supplied)
(Continued)
14
D:\Cmeng's JOB\SONY TV\SY0390_W4 (Rev-4)\4270401131_US\US03STU.fm
KDL-60/55/46NX720/55/46HX820/XBR-65/55/46HX929
4-270-401-13(1)
Cable System or VHF/UHF Antenna
System
System
B XBR-65HX929
B Except XBR-65HX929
Shown with HD BRAVIA
®
Sync™ Basic Connection
B XBR-65HX929
Cable or
Antenna
Antenna
Cable or
Antenna
Antenna
*Rear of TV
*Blu-ray Disc
HD Cable Box or
HD Satellite Receiver
HD Satellite Receiver
*A/V Receiver
SAT
(Dish)
(Dish)
Cable/
Antenna
Antenna
**Optical
Connection
Click on the first or last page to see other XBR-65HX929 service manuals if exist.