Sony XBR-65HX925 Service Manual ▷ View online
XBR-65HX925
43
SECTION 6 - DISASSEMBLY/PART NUMBER INFORMATION
NOTE: The components identified by shading
and
!
mark are critical for safety. Replace only
with part number specified.
NOTE: The components identified by a red outline and a mark contain
confidential information. Specific instructions must be adhered to whenever
these components are repaired and/or replaced.
See Appendix A: Encryption Key Components in the back of this manual.
BATV (MAIN) BOARD AND
G11/G12 (POWER SUPPLY) BOARD REMOVAL
NOTES:
Refer to
Handling the FFC Connector on page 3
to disconnect the LVDS Connector.
The (G11) Insulation Sheets are not included with the LCD Panel and must be replaced when replacing the LCD Panel.
A Release 2 clips to detach Side Bracket from BATV Board
B Remove 5 screws from BATV Board
C Disconnect connectors from BATV Board
(Refer to
Handling the FFC Connector on page 3
)
D Remove 1 screw and disconnect 1 connector to detach Camera Module from Bottom Bracket
E Lift-up Camera Sealing Cap to detach from Bottom Bracket
F Release clips and disconnect 1 connector to detach HEM2 Board from Bottom Bracket
G Remove 1 screw, then release clips and lift-up Bottom Bracket to detach from Horizontal Bottom Frame
H Remove 5 screws and disconnect 5 connectors from G11 Board
I Remove 5 screws and disconnect 5 connectors from G12 Board
REF. NO.
PART NO.
DESCRIPTION
[ASSEMBLY INCLUDES]
REF. NO.
PART NO.
DESCRIPTION
[ASSEMBLY INCLUDES]
D
E
F
B
G
H
I
C
A
151
4-265-834-02
BRACKET SIDE (BAT-V METAL)
152
A-1837-494-A
BATV BOARD, COMPLETE
AFTER REPLACING THE MAIN BOARD OR THE LCD PANEL,
YOU MUST UPDATE THE SOFTWARE TO THE LATEST VERSION
AND COMPLETE ANY SERVICE ADJUSTMENTS
153
1-489-507-11
CAMERA MODULE
154
4-256-663-01
CAP, SEALING (CAMERA)
155
A-1792-512-A
HEM2 BOARD, MOUNTED
156
4-256-664-02
BRACKET, BOTTOM
157
A-1845-361-A
G11 BOARD, COMPLETE
158
4-290-727-01
SHEET, INSULATION (G11)
ORDER THIS PART WHEN REPLACING THE LCD PANEL
159
A-1845-363-A
G12 BOARD, COMPLETE
160
4-256-436-11
SHEET (BAT-V METAL SIDE)
ORDER THIS PART WHEN REPLACING THE LCD PANEL
●
2-990-421-41
SCREW, +PSW M3X6
153
154
155
156
152
157
158
158
159
151
160
XBR-65HX925
44
SECTION 6 - DISASSEMBLY/PART NUMBER INFORMATION
NOTE: The components identified by shading
and
!
mark are critical for safety. Replace only
with part number specified.
NOTE: The components identified by a red outline and a mark contain
confidential information. Specific instructions must be adhered to whenever
these components are repaired and/or replaced.
See Appendix A: Encryption Key Components in the back of this manual.
REF. NO.
PART NO.
DESCRIPTION
[ASSEMBLY INCLUDES]
REF. NO.
PART NO.
DESCRIPTION
[ASSEMBLY INCLUDES]
HORIZONTAL AND VERTICAL FRAMES, HLT2 BOARD AND
LCD PANEL REMOVAL
CAUTIONS:
When replacing the LCD Panel Assembly refer to
“Rear Cover Caution” on page A-1.
The HLT2 Board is attached to the LCD Panel with PWB (H) Tape. Do NOT damage the HLT2 Board when removing
from the LCD Panel.
A Remove 5 screws from Horizontal Top Frame
B Remove 3 screws from Vertical Right Frame
C Remove 3 screws from Vertical Left Frame
D Remove 6 screws from Horizontal Bottom Frame
E Lift up Frames to detach from LCD Panel
F Remove 8 screws from Corner Joints to detach Frames
G Carefully lift-up HLT2 Board to detach from LCD Panel
Detail A-2
G
Detail A-1
F
A
B
D
C
E
Detail A-1
Detail A-2
201
202
203
207
206
205
204
CLEANING THE LCD PANEL
CAUTION: When cleaning the TV, be sure to unplug the power cord to avoid any chance of electric shock.
Clean the cabinet of the TV with a dry soft cloth.
Wipe the LCD screen gently with a soft cloth.
→ Stubborn stains may be removed with a cloth slightly moistened with a solution of mild soap and warm water.
→ If using a chemically pretreated cloth, please follow the instruction provided on the package.
→ Never use strong solvents such as a thinner, alcohol or benzine for cleaning.
→ Periodic vacuuming of the ventilation openings is recommended to ensure to proper ventilation.
206
A-1792-920-A
HLT2 BOARD, MOUNTED
207
NA
LCD PANEL ASSEMBLY
FOR ALL LCD PANEL AND TCON BOARD PART NUMBER
INFORMATION REFER TO THE LCD PANELS SERVICE MANUAL
THE LD BOARD
IS INCLUDED WITH THE LCD PANEL AND IS NOT
AVAILABLE AS A REPLACEMENT PART
●
2-990-421-41
SCREW, +PSW M3X6
201
4-278-468-01
FRAME, HT (65 ALY)
202
4-278-470-01
FRAME, VR (65 ALY)
203
4-278-471-01
FRAME, VL (65 ALY)
204
4-278-469-01
FRAME, HB (65 ALY)
205
4-263-654-01
JOINT, CORNER
XBR-65HX925
45
SECTION 6 - DISASSEMBLY/PART NUMBER INFORMATION
NOTE: The components identified by shading
and
!
mark are critical for safety. Replace only
with part number specified.
NOTE: The components identified by a red outline and a mark contain
confidential information. Specific instructions must be adhered to whenever
these components are repaired and/or replaced.
See Appendix A: Encryption Key Components in the back of this manual.
REF. NO.
PART NO.
DESCRIPTION
[ASSEMBLY INCLUDES]
REF. NO.
PART NO.
DESCRIPTION
[ASSEMBLY INCLUDES]
SCREWS
▲
2-580-608-01
SCREW, +PSW M5X16
TABLE-TOP STAND(4)
4
△
4-256-393-01
SCREW, +PSW M3X6 W12
AC CVR(1), WOOFER(2)
3
■
2-580-639-01
SCREW, +BVTP 4X12 TYPE2 IT-3
RC(4)
4
□
4-257-907-01
JOINT, STAND
RC(2)
2
◆
4-268-126-02
SCREW, ORNAMENTAL M6X12
HEAD BRKT to NECK(3), STND BASE to NECK(4), RC(4)
11
◇
2-580-591-01
SCREW, +PSW M3X5
RC(21)
21
●
2-990-421-41
SCREW, +PSW M3X6
BATV(5), G11(5), G12(5), WIFI(1), ANT(2), CAM(1), BTM BRKT(1),
HT FRM(5), HB FRM(6), VR FRM(3), VL FRM(3), JOINTS(8)
45
○
7-685-646-79
SCREW, +BVTP 3X8 TYPE2 IT-3
RC TRMNL AREA(1)
1
★
7-685-648-79
SCREW, +BVTP 3X12 TYPE2 IT-3
HEAD BRKT to H CVR(2)
2
XBR-65HX925
CONNECTORS
257
258
251
252
253
254
255
256
251
1-838-923-11
CONNECTOR ASSEMBLY
*
252
1-838-920-11
CONNECTOR ASSEMBLY 2P
253
1-838-921-11
CONNECTOR ASSEMBLY 2P
*
254
1-910-801-47
CONNECTOR ASSEMBLY 5P
255
1-910-801-27
CONNECTOR ASSEMBLY 14P
256
1-910-801-13
CONNECTOR ASSEMBLY 28P
* 257
1-838-815-11
(LVDS) FLEXIBLE FLAT CABLE Y3 65S
*
258
1-910-801-04
HARNESS ASSEMBLY
XBR-65HX925
46
SECTION 6 - DISASSEMBLY/PART NUMBER INFORMATION
ACCESSORIES AND PACKAGING
3-299-071-05
FLYER, SAFETY
4-273-016-34
MANUAL, INSTRUCTION
MISCELLANEOUS
4-180-957-01
BADGE, XBR LOGO(H6)
ORDER THIS PART WHEN REPLACING THE LCD PANEL
4-262-708-02
CLAMPER, CABLE
4-287-541-01
CUSHION, CH
4-257-907-01
JOINT, STAND
(SCREWS USED WHEN STAND IS ATTACHED-NOT USED WITH WALL MOUNTS)
7-685-648-79
SCREW +BVTP 3X12 TYPE2 IT-3
(SCREWS TO ATTACH H-COVER TO HEAD BRACKET)
4-268-126-02
SCREW, ORNAMENTAL M6X12
(SCREWS TO ATTACH HEAD BRACKET AND STAND BASE TO NECK)
2-580-608-01
SCREW, +PSW M5X16
(SCREWS TO ATTACH TABLE-TOP STAND TO LCD TV)
For product protection and safety reasons, Sony strongly recommends
that you use the screws provided with the TV
CAUTION: These screws cannot be used to secure the TV to
the Wall Mount Brackets
4-100-136-01
SHEET (CORE), C
4-290-467-01
SHEET, RADIATION (BAT-L/V)
ORDER THIS PART WHEN REPLACING THE LCD PANEL
4-256-454-02
SPACER (G A)
4-260-776-02
SPACER (G B)
4-195-059-21
TAPE, PWB (H)
ORDER THIS PART WHEN REPLACING THE LCD PANEL
7-600-034-93 TAPE,ADHESIVE(08C16-400)10X50M
OPTIONAL ACCESSORIES
THE 3D GLASSES LISTED BELOW ARE AVAILABLE THROUGH THE
SONY STYLE
WEBSITE.
USE THE DESCRIPTION TO LOCATE THE PART AND PRICING INFORMATION
TDG-BR50/B
3D GLASSES (BLACK - SIZE SMALL)
TDG-BR50/P
3D GLASSES (PINK - SIZE SMALL)
TDG-BR50/L
3D GLASSES (BLUE - SIZE SMALL)
TDG-BR100/B
3D GLASSES (SIZE ADULT)
TDG-BR200/B
3D GLASSES (SIZE SMALL)
TDG-BR250/B
3D GLASSES (SIZE ADULT)
TDG-BR250/DBL 3D GLASSES - TWO PACK (SIZE ADULT)
4-289-288-01
BATTERY COVER FOR 3D GLASSES
1-458-395-11
POLARIZER ADAPTER (FOR BR250 MODEL)
1-458-395-21
POLARIZER ADAPTER (FOR BR200 MODEL)
1-838-940-11
USB CABLE
X-2582-496-1
SUPPORT BELT KIT
REMOTE COMMANDER
1-489-464-11
REMOTE COMMANDER (RM-YD058)
Click on the first or last page to see other XBR-65HX925 service manuals if exist.