DOWNLOAD Sony KV-XA29M60 Service Manual ↓ Size: 6.08 MB | Pages: 119 in PDF or view online for FREE

–

 29 

–

Using Your New TV

12

Press   until the desired
period of time appears.

The Wake Up timer starts
immediately after you
have set it.

Select the program number or video input you want to display when you
wake up.

Press 1 or set the Sleep timer if you want the TV to turn off automatically.

The   indicator on the TV lights up orange.

Press   until “WAKE UP TIMER: OFF” appears or turn off the TV’s
main power.

Note
• If no buttons or controls are pressed for more than two hours after the TV

is turned on using the Wake Up timer, the TV automatically goes into the
standby mode. To continue watching the TV, press any button or control
on the TV or the remote.

Press   until the desired
period of time appears.

The Sleep timer starts
immediately after you
have set it.

Press   until “SLEEP TIMER:  OFF” appears or turn the TV off.

13

Advanced Operations

You can select picture and sound modes
and adjust the setting to your preference
in “PERSONAL” option.

Press PIC MODE
repeatedly until you get
the desired picture mode.

“DYNAMIC”

receive high contrast pictures.

“STANDARD”

receive normal contrast pictures.

“SOFT”

receive mild pictures.

“PERSONAL”

receive the last adjusted picture setting from the “ADJUST”
option in the “PICTURE” menu (see page 20).

Press SOUND MODE
repeatedly until you get
the desired sound mode.

“DYNAMIC”

listen to dynamic and clear sound that emphasizes the low and
high tones.

“DRAMA”

listen to sound that emphasizes voice and high tones.

“SOFT”

receive soft sound.

“PERSONAL”

receive the last adjusted sound setting from the “ADJUST”
option in the “SOUND” menu (see page 22).

Tip
• You can also set the picture and sound modes using the menu (see

 on page 20 and Changing the

 on page 22).

9

9

9

9

–

 30 

–

14

Advanced Operations

Press FAVORITE.

Press the number button
from 1 to 6 to select the
desired favorite channel.

Tip
• To program your favorite channels, see Adjusting each program number

on page 25.

You can display and select six of your
favorite channels directly from your TV
screen.

15

Advanced Operations

Press SURROUND
repeatedly until you
receive the desired
surround sound.

The surround feature enables you to
enjoy the sound effects of a concert hall
or movie theater.

“TruSurround”

listen to the surround sound that spreads out to the rear of a room.

“OFF”

turn off the surround sound.

Tip
• You can also select the surround option using the menu (see Changing the

 on page 22).

The surround of your TV is categorized as TruSurround.

 is a trademark of SRS Labs, Inc. SRS and the SRS symbol are

registered trademarks of SRS Labs, Inc. in the United States and selected foreign
countries. SRS and TruSurround are incorporated under license from SRS Labs,
Inc. and are protected under United States Patent Nos. 4,748,669 and 4,841,572
with numerous additional issued and pending foreign patents.

–

 31 

–

16

Advanced Operations

NICAM stereo

NICAM bilingual

NICAM monaural

You can enjoy stereo sound or bilingual
programs of NICAM and A2 stereo
systems.

Press A/B repeatedly until you
receive the sound you want.

The on-screen display changes
to show the selected sound.
The 

 indicator on the TV

lights up red when receiving
any stereo or bilingual
program.

NICAM

PROGR

MENU

AUTO
PROGR

ENTER

SELECT

L(MONO)

3

17

Advanced Operations

Notes
• If the signal is very weak, the sound becomes monaural automatically.
• If the stereo sound is noisy when receiving a NICAM program, select

“MONO”. The sound becomes monaural, but the noise is reduced.

If the sound is distorted when receiving a monaural program
through the 8 (antenna) terminal

Press A/B repeatedly until “MONO” appears on the screen.

To cancel the monaural sound setting, press A/B again until
“AUTO” appears on the screen.

Notes
• The “MONO” or “AUTO” setting is memorized for each program

number.

• You cannot receive stereo broadcast signal when the TV is in the “MONO”

setting. Normally set the TV to “AUTO”.

A2 stereo

A2 bilingual

NICAM

A2

Hong Kong, Singapore, New Zealand, Malaysia,
Thailand, etc.

Australia, Malaysia, Thailand, etc.

–

 32 

–

18

Adjusting Your Setup (MENU)

The MENU button lets you open a menu and change the settings of your TV. Here's
an overview of the menu system.

P RO R AM S E T

A T I O

C O L OR S Y S :

G

L A N U A G E :

G

S T U P

E

P I C RO T

“PICTURE”

“PICTURE MODE”

Select the picture mode:
“DYNAMIC”t “STANDARD”t “SOFT”t
“PERSONAL”t  “ADJUST”

“ADJUST”

Adjust the “PERSONAL” option:
“PICTURE” t  “COLOR”t “BRIGHT”t
“HUE”t “SHARP”

“WIDE MODE”

Change the picture size.

“INTELLIGENT PIC”

Optimize picture quality.

“SOUND”

“SOUND MODE”

Select the sound mode:
“DYNAMIC”t “DRAMA” t  “SOFT” t
“PERSONAL“ t  “ADJUST”

“ADJUST”

Adjust the “PERSONAL” option:
“BASS” t “TREBLE”t “BALANCE”t “BBE”

*

“SURROUND”

Select the surround mode:
“TruSurround” t  “OFF”

“INTELLIGENT VOL”

Adjust volume automatically.

“SETUP”

“LANGUAGE”

Change the menu language:
“ENGLISH” t“

”(Chinese) t “

”(Arabic) t

“

” (Thai)

“PIC ROTATION”

Rotate the picture.

“PROGRAM SETUP”

Adjust each program number settings.

“COLOR SYS”

Change the color system:
“AUTO” t  “PAL” t  “SECAM” t
“NTSC3.58” t  “NTSC4.43”

“CH PRESET”

“AUTO PROGRAM”

Preset channels automatically.

“MANUAL PROGRAM”

Preset channels manually.

“TV SYS”

Change the TV system:
“B/G” t  “I” t  “D/K” t  “M”

*

The BBE is manufactured by Sony Corporation under license from BBE
Sound, Inc. It is covered by U.S. Patent No. 4,638,258 and No. 4,482,866.
The word “BBE” and the BBE symbol are the trademarks of BBE Sound, Inc.

19

Adjusting Your Setup (MENU)

You can use the buttons on the remote
and on the TV as well to display the
menu and adjust the settings.

Press MENU to display the
menu.

Press + or – to select the
desired item.

Press ENTER to confirm
your selection and go to
the next menu level.

Adjust the setting value

+/–

Return to the previous menu level

ENTER

Cancel the menu

MENU

Tips
• To return from Menu Level 2 to Menu Level 1, press +/– to select the

return icon (

), then press ENTER.

• Some of the menu items can be operated directly using the remote buttons.
• The MENU, ENTER, and SELECT 

/

 

buttons on the TV can also be used

for the operations above.

Note
• If more than 60 seconds elapse between entries, the menu screen

automatically disappears.

P I C T URE

+

  :

MO

C

P I C T URE

I N T E L L I GEN T P I C : OF F

W I DE MODE : OF F

DE DYNAM I

R

T V

CH PRE S E T

S Y S : B / G

MANUA L PROGRAM

AM+ + +

O PROG

AU

T

+

AU TO PROGRAM

PROGRAM

MANUA L

B / G

T V S Y S :

E T

CH PRE S

PROGR

MENU

AUTO

PROGR

ENTER

SELECT