DOWNLOAD Sony KV-AR25M50A Service Manual ↓ Size: 9.11 MB | Pages: 81 in PDF or view online for FREE

Using Your New TV

10

PROGR

Press SELECT until
“MANUAL PROGRAM”
appears.

Press + or – to enter the
“MANUAL PROGRAM”
mode.

Press PROGR +/– or the
number buttons until the
desired program number
appears.

Press + or – until the
desired channel picture
appears.

Press SELECT to exit the
“MANUAL PROGRAM”
mode.

If the picture or sound is abnormal when receiving programs through the 8 (antenna
input) terminal

(1) Press SELECT until “TV SYS” appears.

(2) Press + or – to select the appropriate

TV system until the picture or sound
quality is optimal.

b

SELECT

SELECT

b

b

Using Your New TV

11

If the color is abnormal when receiving programs through the 8 (antenna input)
terminal or the t (video input) jack.

(1) Press SELECT until “COLOR SYS” appears.

(2) Press + or – to select the appropriate

color system until the color is
optimal.

Tip
• Normally set “COLOR SYS” to “AUTO”.

Press PROGR +/– or the number buttons until the unused or unwanted
program number appears.

Press SELECT until “MANUAL PROGRAM” appears.

Press + or – to enter the “MANUAL PROGRAM” mode.

Press PIC MODE.

Press SELECT to exit the “MANUAL PROGRAM” mode.

Preset the channel automatically or manually.

Tip
• You can also use SELECT and 2 +/– on the TV to preset channels and

skip program numbers.

The fine tuning (FINE) function may help to reduce the following problems:
double images and lines moving across the TV screen.

You can use the fine tuning function as below:

(1) Select the program number you want to adjust.
(2) Press SELECT until “MANUAL PROGRAM” appears on the screen.
(3) Press + or – on the remote control.
(4) Press 

 to display “FINE” on the screen.

(5) Press + or – continuously until the above problems are minimized.

The + or – icon on the screen flashes while tuning.

(6) Press SELECT to return to normal screen.

Using Your New TV

12

This section explains functions used
while watching the TV. Most operations
can be done using the remote.

Press ! to turn on the TV.

When the TV is in the
standby mode (the 1
indicator on the TV is lit
red), press ?/1 on the
remote or PROGR +/– on
the TV.

Press PROGR +/– or the
number buttons to select
the program number.

For double digit numbers,
press -, then the number
(e.g., for 25, press -, then
2 and 5).

Press 2 +/– to adjust the
volume.

%

?/1

t

a

2

4

L(MONO)

R

PROGR

MENU

AUTO
PROGR

ENTER

SELECT

TV

1

2

3

4

6

7

8

9

0

5

JUMP

SOUND 

MODE

 

FAVORITE

PROGR

PROGR

1

 

Using Your New TV

13

Turn off temporarily

Turn off completely

Mute the sound

Watch the video input
(VCR, camcorder, etc.)

Jump back to the previous program
number

Display the on-screen information*

Adjust the volume of all
program numbers automatically

Adjust the picture position when it
is not aligned to the TV screen

* The picture, sound, and either the program number or video input are

displayed. The on-screen display for the picture and sound information
disappears after about three seconds.

?/1

. The 1 indicator on the TV lights up red.

!

 on the TV.

%

.

t to select “VIDEO 1”, “VIDEO 2” or “DVD”.
To return to the TV program, press a.

JUMP.

.

SELECT repeatedly until “INTELLIGENT VOL”
appears, then press + or – to select “ON”.
To cancel, select “OFF”.

SELECT repeatedly until “PIC ROTATION” appears,
then press + or – to adjust the alignment of the picture
position.

The

 or 

 icon on the screen flashes while

adjusting.