DOWNLOAD Sony KV-AR25M50A Service Manual ↓ Size: 9.11 MB | Pages: 81 in PDF or view online for FREE

2

•  Dangerously high voltages are present inside the TV.

•  Operate the TV only between 110 – 240 V AC.

To prevent fire or shock hazard, do not expose
the TV to rain or moisture.

Do not operate the TV if any liquid or solid object
falls into it. Have it checked immediately by
qualified personnel only.

Do not open the cabinet and the rear cover of the
TV as high voltages and other hazards are
present inside the TV. Refer servicing and
disposal of the TV to qualified personnel.

Your TV is recommended for home use only.
Do not use the TV in any vehicle or where it may
be subject to excessive dust, heat, moisture or
vibrations.

Do not block the ventilation openings of the TV.
Do not install the TV in a confined space, such
as a bookcase or built-in cabinet.

For children’s safety, do not leave children alone
with the TV. Do not allow children to climb onto
it.

Do not plug in too many appliances to the same
power socket. Do not damage the power cord.

Clean the TV with a dry and soft cloth.
Do not use benzine, thinner, or any other chemicals
to clean the TV. Do not scratch the picture tube.

For your own safety, do not touch any part of the
TV, the power cord and the antenna cable during
lightning storms.

Do not place any objects on the TV. The apparatus
shall not be exposed to dripping or splashing and
that no objects filled with liquids, such as vases,
shall be placed on the apparatus.

3

Pull the power cord out by the plug.  Do not pull
the power cord itself.  Even if your TV is turned
off, it is still connected to the AC power source
(mains) as long as the power cord is plugged in.
Unplug the TV before moving it or if you are not
going to use it for several days.

Install the TV on a stable TV stand and floor
which can support the TV set weight. Ensure that
the TV stand surface is flat and its area is larger
than the bottom area of the TV.

Step 1:  Connect the antenna ................................................................. 4
Step 2:  Insert the batteries into the remote ......................................... 5
Step 3:  Preset the channels automatically .......................................... 5

Connecting optional components ............................................................. 6
Securing the TV ............................................................................................ 8
Presetting channels ...................................................................................... 9
Watching the TV ........................................................................................ 12

Using Your New TV

4

If you wish to connect a VCR, see the Connecting a VCR diagram below.

To watch the video input, press t (see page 13).

VIDEO

VIDEO IN

VIDEO OUT

AUDIO

R

L

1

2

R

L

Y

C

B

C

R

To 8
(antenna
input)

To t 1 or 2
(video input)

Using Your New TV

5

Tips
• If you want to stop automatic channel presetting, press SELECT twice.
• If your TV has preset an unwanted channel or cannot preset a particular

channel, then preset your TV manually (see page 10).

Note
• During automatic channel presetting, your TV screen will indicate “B/G” ,

“I”, “D/K” or “M” for the TV system (“TV SYS”).

Notes
• If you connect a monaural VCR, connect the yellow plug to 

 (the yellow jack)

and the black plug to  -L (MONO) (the white jack).

• If you connect  a VCR  to the 8 (antenna input) terminal, preset the signal output

from the VCR to the program number 0 on the TV.

• If both 

 (S video input) and t 1 (video input) at the rear of your TV are input

at the same time, the 

 (S video input) is automatically selected. To view the

video input to t 1 (video input), disconnect the S video cable.

• Do not connect video equipment to the t 2 (video input) jacks at the front and the

rear of your TV at the same time; otherwise the picture will not be displayed
properly on the screen.

• When no signal is input from the connected video equipment, the TV screen

becomes blue.

CAUTION
• Do not plug in the power cord until you have completed making all other

connections; otherwise a minimum leakage current might flow through
the antenna and other terminals to ground.

• To avoid battery leakage and damage to the remote, remove the batteries

from the remote if you are not going to use it for several days. If any
liquid that leaks from the batteries touches you, immediately wash it
away with water.

Note
• Do not use old batteries nor use different types of batteries together.

AUTO

PROGR

VHF   LOW   B/G

PROGR

SELECT

AUTO
PROGR

ENTER

SELECT

2

L(MONO)

R