Sony KV-AR25M50A Service Manual ▷ View online
Using Your New TV
6
Sony KV-AR29M50A Group R25 (GB)_4-094-833-11(1)
Connecting optional components
You can connect optional audio/video components, such as a VCR, multi disc player,
camcorder, video game or stereo system.
camcorder, video game or stereo system.
To watch the video input of the connected equipment, press t (see page 13).
Connecting a camcorder/video game equipment
using the t (video input) jacks
using the t (video input) jacks
Notes
• You can also connect video equipment to the t 1 or 2 (video input) jacks
• You can also connect video equipment to the t 1 or 2 (video input) jacks
at the rear of your TV.
• Do not connect video equipment to the t 2 (video input) jacks at the
front and the rear of your TV at the same time; otherwise the picture will
not be displayed properly on the screen.
not be displayed properly on the screen.
Connecting audio/video equipment using the T
(monitor output) jacks
(monitor output) jacks
Note
• If you select “DVD” on your TV screen, the signal from the T (monitor
• If you select “DVD” on your TV screen, the signal from the T (monitor
output) jacks will not be output properly. This does not indicate a
malfunction.
malfunction.
1
2
R
L
Y
C
B
C
R
2
(MONO)
PROGR
SELECT
AUTO
PROGR
PROGR
ENTER
SELECT
2
L(MONO)
R
Front of TV
Camcorder
Video game
equipment
equipment
To video and
audio outputs
audio outputs
(yellow)
-L (MONO)
(white)
-R (red)
Rear of TV
To
antenna
output
antenna
output
To video and
audio inputs
audio inputs
Audio system
To
audio
inputs
audio
inputs
VCR
: Signal flow
: Signal flow
To
t
2
(video input)
To T
(monitor
output)
(monitor
output)
or
Audio/Video cable (not supplied)
Antenna cable (not supplied)
Audio/Video cable
(not supplied)
(not supplied)
or
Using Your New TV
Using Y
our New TV
7
Sony KV-AR29M50A Group R25 (GB)_4-094-833-11(1)
DVD player
To
L (white)
R (red)
L (white)
R (red)
Audio cable
(not supplied)
(not supplied)
To component
video output
video output
Component video cable
(not supplied)
(not supplied)
To audio
output
output
: Signal flow
To
(component
video input)
(component
video input)
Connect
To (on the DVD player)
Y (green)
Y
C
B
(blue)
C
b
, B-Y or P
B
C
R
(red)
C
r
, R-Y or P
R
Rear of TV
VIDEO
R-AUDIO-L
LINE OUT
Y
COMPONENT VIDEO OUT
S VIDEO OUT
C
B
C
R
R
L
Y
C
B
C
R
Connecting a DVD player using the
(component video
input) jacks
1 Connect R and L under
(component video input) on your TV to the LINE OUT,
AUDIO R and L output connectors on your DVD player.
2 Using a component video cable, connect Y, C
B
, and C
R
under
(component video
input) on your TV to the COMPONENT VIDEO OUT Y, C
B
, and C
R
output
connectors on your DVD player.
Notes
• If your DVD player can output interlace and progressive mode signals,
• If your DVD player can output interlace and progressive mode signals,
select the interlace output when connecting to
(component video
input) on your TV. Your TV can receive either 525i/60Hz or 625i/50Hz
interlace signals.
interlace signals.
• Some DVD player terminals may be labeled differently:
• Since the high quality pictures on a DVD disc contain a lot of information,
picture noise may appear. In this case, adjust the sharpness (“SHARP”)
(see page 16).
(see page 16).
Using Your New TV
8
Sony KV-AR29M50A Group R25 (GB)_4-094-833-11(1)
Securing the TV
To prevent the TV from falling, use the supplied screws, clamps and band to
secure the TV.
secure the TV.
20 mm
3.8 mm
screws
clamps band
Screw the band to the TV stand and to the
provided hole at the rear of your TV.
provided hole at the rear of your TV.
(1) Put a cord or chain through the clamps.
(2) Screw one clamp to a wall or pillar and
(2) Screw one clamp to a wall or pillar and
the other clamp to the provided hole at
the rear of your TV.
the rear of your TV.
(1) Attach each end of a cord or chain to
the provided holders at the rear of
your TV.
your TV.
(2) Securely fix the attached cord or chain
to a wall or pillar using an attachment
which can support the TV set weight.
which can support the TV set weight.
Note
• Use only the supplied screws. Use of other screws may damage the TV.
• Use only the supplied screws. Use of other screws may damage the TV.
or
or
Using Your New TV
Using Y
our New TV
9
Sony KV-AR29M50A Group R25 (GB)_4-094-833-11(1)
Presetting
channels
channels
You can preset up to 100 TV channels in
numerical sequence from program
number 1 using the remote and the
buttons on your TV as well.
numerical sequence from program
number 1 using the remote and the
buttons on your TV as well.
Presetting channels automatically
1
Press ! to turn on the TV.
2
Press AUTO PROGR.
Note
• During automatic channel presetting, your TV screen will indicate “B/G” ,
• During automatic channel presetting, your TV screen will indicate “B/G” ,
“I”, “D/K” or “M” for the TV system (“TV SYS”).
To preset channels automatically from a specified program number
(1) Press SELECT until “AUTO PROGRAM” appears.
(2) Press + or – to enter the “AUTO PROGRAM” mode.
The on-screen display will start flashing.
(3) Press PROGR +/– or the number buttons until the desired program number
appears.
(4) Press + or – to start presetting channels automatically.
TV
1
2
3
4
6
7
8
9
-/--
0
5
JUMP
SOUND
MODE
FAVORITE
PROGR
?/1
Number buttons
SELECT
2
+/–
PROGR +/–
+ or –
PIC MODE
VHF LOW B/G
AUTO
PROGR
AUTO
PROGR
PROGR
SELECT
AUTO
PROGR
PROGR
ENTER
SELECT
2
L(MONO)
R
continued
Click on the first or last page to see other KV-AR25M50A service manuals if exist.