Sony KV-27FA210 Service Manual ▷ View online
18
Operating Instructions
Connecting a DVD Player
Using audio/video cables (not supplied), connect AUDIO/VIDEO OUT on your DVD player
to AUDIO/VIDEO IN on your TV.
to AUDIO/VIDEO IN on your TV.
Optional connection
❏
For better picture quality, use S VIDEO instead of the yellow video cable. S VIDEO does
not provide sound, so you still must connect the audio cables.
not provide sound, so you still must connect the audio cables.
❏
If your DVD player is equipped with component video outputs (Y, P
B
, P
R
), you can
improve the picture quality by using component video cables (480i only). This connection
can be done on VIDEO 4 or 5 (both Y, P
can be done on VIDEO 4 or 5 (both Y, P
B
, P
R
).
1
Using component video cables (not supplied), connect the Y, P
B
, P
R
OUT on your DVD
player to Y, P
B
, P
R
IN on your TV.
2
Connect AUDIO OUT on your DVD player to AUDIO IN on your TV.
Using your TV with this connection
This connection allows you to do the following:
❏
Program your Sony remote control to operate your DVD (see page 5).
❏
To activate your remote, press
to operate your DVD.
❏
Press
repeatedly to switch to the DVD player's input (VIDEO input).
✍
PIP feature is not compatible with VIDEO 4-5, you can use VIDEO 1or 3. These inputs are compatible
with PIP.
with PIP.
✍
The Y, P
B
, P
R
outputs on your DVD player are sometimes labeled Y, C
B
, and C
R
or Y, B-Y, and R-Y. If so,
connect the cables to like colors.
1
3
4
AUDIO OUT
(VAR/FIX)
(VAR/FIX)
VIDEO
L
(MONO)
R
L
R
(MONO)
S VIDEO
Y
P
B
P
R
5
Rear of TV
Rear of DVD Player
Video (yellow)
Audio L (white)
Audio R (red)
1
3
4
AUDIO OUT
(VAR/FIX)
(VAR/FIX)
VIDEO
L
(MONO)
R
L
R
(MONO)
S VIDEO
Y
P
B
P
R
5
Rear of DVD Player
2
1
Rear of TV
Audio L (white)
Audio R (red)
P
R
(red)
P
B
(blue)
Y (green)
01US01COV-BR2.book Page 18 Monday, August 4, 2003 5:05 PM
Connecting Your TV
19
Connecting a Camcorder
To connect your camcorder, you can use the Audio/Video inputs on either the front or rear
panel of the TV. Using the audio/video cables (not supplied), connect the AUDIO/VIDEO
OUT on your camcorder to the AUDIO/VIDEO IN on your TV.
panel of the TV. Using the audio/video cables (not supplied), connect the AUDIO/VIDEO
OUT on your camcorder to the AUDIO/VIDEO IN on your TV.
Connecting an Audio System
1
Using audio/video cables (not supplied), connect AUDIO OUT on your TV to one of the
unused line inputs (e.g. TV, AUX, TAPE2) on your stereo.
unused line inputs (e.g. TV, AUX, TAPE2) on your stereo.
2
Set the Speaker option to Off. For more instructions, see "Using the Audio Menu" on page 28.
3
Open the Audio Out option on the Audio Menu and select Fixed to control the volume through
the connected audio system. For more instructions, see "Using the Audio Menu" on page 28.
the connected audio system. For more instructions, see "Using the Audio Menu" on page 28.
A/V output
Audio R (red)
Audio L (white)
Video (yellow)
Video (yellow)
Front A/V Panel
1
3
4
AUDIO OUT
(VAR/FIX)
(VAR/FIX)
VIDEO
L
(MONO)
R
L
R
(MONO)
S VIDEO
Y
P
B
P
R
5
Rear of TV
AUDIO-L (white)
AUDIO-R (red)
Line
input
input
01US01COV-BR2.book Page 19 Monday, August 4, 2003 5:05 PM
21
Using Basic Functions
Setting Up the TV
After you have finished connecting your TV, you can use Auto Program to set up your
channels. During Auto Program, the TV will automatically search for available channels and
program receivable channels.
channels. During Auto Program, the TV will automatically search for available channels and
program receivable channels.
1
Press
to turn on the TV. The Initial Setup screen appears.
2
Press
on the remote control or on the TV front panel to start Auto Program, or press
to exit.
To perform Auto Program again
1
Press .
2
Press
g
to highlight Channel Menu.
3
Press
f
to highlight Cable. Press
to select.
4
Press
F
or
f
to highlight On or Off according to how you connected your TV. Press
to
select.
5
Press
f
to highlight Auto Program. Press
to search for channels.
6
After Auto Program finishes, press
to exit.
To reset the TV to factory settings
1
Turn the TV on.
2
Hold down
on the remote control.
3
Press and release the POWER button on the TV front panel. The TV will turn itself off,
then back on.
then back on.
4
Release .
✍
When you start Auto Program wait until it is finished; otherwise it will skip over channels that are
available. Perform Auto Program again to program receivable channels.
available. Perform Auto Program again to program receivable channels.
✍
The Initial Setup screen appears each time you turn on the TV until you perform Auto Program.
Initial Setup
Auto Program: [CH+]
[CH–]
First please connect
cable/antenna
cable/antenna
Exit:
01US01COV-BR2.book Page 21 Monday, August 4, 2003 5:05 PM
22
Operating Instructions
Quick Start to the Menus
The following settings are available in your on-screen menus. For more details on how to use the
menus, see “Using the Menus” on page 25.
menus, see “Using the Menus” on page 25.
Menu
Allows you to
Adjust your picture settings.
Change your audio settings.
Customize your channel settings.
Set rating limits on your TV based on program
rating or content.
rating or content.
Mode :
Vivid
Picture
Brightness
Color
Hue
Sharpness
Color Temp. :
Hue
Sharpness
Color Temp. :
Cool
VM:
High
Video
Audio
Channel Parent
Timer
Setup
Basic
Move:
Select:
End:
Treble
Bass
Bass
Effect:
Off
Balance
MTS:
Stereo
Video
Audio
Channel Parent
Timer
Setup
Basic
Speaker:
On
Audio Out: Variable
Move:
Select:
End:
Steady Sound:
Off
Favorite Channels
Cable :
Cable :
On
Channel Fix:
Off
Auto Program
Channel Skip/Add
Channel Label
Channel Skip/Add
Channel Label
Video
Audio
Channel
Parent
Timer
Setup
Basic
Move:
Select:
End:
Video
Audio
Channel
Parent
Timer
Setup
Basic
Password:
Move:
Select:
End:
01US01COV-BR2.book Page 22 Monday, August 4, 2003 5:05 PM
Click on the first or last page to see other KV-27FA210 service manuals if exist.