Sony KV-27FA210 Service Manual ▷ View online
14
Operating Instructions
TV and Cable Box
1
Connect the coaxial cable from your cable service to the IN jack on your cable box.
2
Connect a coaxial cable (not supplied) from the OUT jack on your cable box to the
VHF/UHF jack on your TV.
VHF/UHF jack on your TV.
Using your TV with this connection
This connection allows you to do the following:
❏
Program your Sony remote control to operate your cable box (see page 5).
❏
To activate your remote press
to operate your cable box and then use the
buttons or CH+/- buttons to change the channels. To do this, first program your remote
control, then use the Channel Fix feature to set your TV to channel 3 or 4 (see page 29).
control, then use the Channel Fix feature to set your TV to channel 3 or 4 (see page 29).
1
3
4
VIDEO
L
(MONO)
R
S VIDEO
P
P
1
2
Rear of TV
Cable box
From cable/
antenna
antenna
0
9
01US01COV-BR2.book Page 14 Monday, August 4, 2003 5:05 PM
Connecting Your TV
15
TV, VCR, and Cable Box
1
Connect the coaxial cable from your cable service to the IN jack on your cable box.
2
Connect a coaxial cable (not supplied) from the OUT jack on your cable box to the IN jack
on your VCR.
on your VCR.
3
Connect a coaxial cable (not supplied) from the OUT jack on your VCR to the VHF/UHF
jack on the TV.
jack on the TV.
4
If your VCR is equipped with video outputs, you can get better picture quality by
connecting audio/video cables (not supplied) from AUDIO/VIDEO OUT on your VCR to
AUDIO/VIDEO IN on your TV.
connecting audio/video cables (not supplied) from AUDIO/VIDEO OUT on your VCR to
AUDIO/VIDEO IN on your TV.
Optional connection
❏
For better picture quality, use S VIDEO inserted of the yellow video cable. S VIDEO does
not provide sound, so you still must connect the audio cables.
not provide sound, so you still must connect the audio cables.
Using your TV with this connection
❏
Program your Sony remote control to operate your VCR or cable box (see page 5).
❏
To activate your remote, press
to operate your VCR or
to operate your cable
box. To do this, first program your remote control, then use the Channel Fix feature to set
your TV to channel 3 or 4 (see page 29).
your TV to channel 3 or 4 (see page 29).
❏
Press
repeatedly to switch between VCR input (VIDEO input), VHF/UHF (local
channels or unscrambled), or cable box (cable system or scrambled channels).
1
3
4
AUDIO OUT
(VAR/FIX)
(VAR/FIX)
VIDEO
L
(MONO)
R
L
R
(MONO)
S VIDEO
Y
P
B
P
R
5
3
From
4
1
VCR
2
Rear of TV
Video (yellow)
Audio R (red)
Audio L (white)
cable
Cable Box
01US04BAS-BR.fm Page 15 Tuesday, August 5, 2003 9:40 AM
16
Operating Instructions
Connecting a TV and Satellite Receiver
1
Connect the cable from your satellite antenna to SATELLITE IN on your satellite receiver.
2
Connect the coaxial cable from your cable service or antenna to the VHF/UHF jack on
your TV.
your TV.
3
Using audio/video cables (not supplied), connect AUDIO/VIDEO OUT on your satellite
receiver to AUDIO/VIDEO IN on your TV.
receiver to AUDIO/VIDEO IN on your TV.
Using your TV with this connection
This connection allows you to do the following:
❏
Program your Sony remote control to operate your satellite receiver (see page 5).
❏
To activate your remote, press
to operate your satellite receiver. See page 7 on how
to operate other functions.
❏
Press
repeatedly to switch to satellite receiver input (VIDEO input).
1
3
4
AUDIO OUT
(VAR/FIX)
(VAR/FIX)
VIDEO
L
(MONO)
R
L
R
(MONO)
S VIDEO
Y
P
B
P
R
5
Satellite receiver
Satellite
antenna
antenna
cable
1
2
3
From
cable/
antenna
Video (yellow)
Audio R (red)
Audio L (white)
Rear of TV
01US01COV-BR2.book Page 16 Monday, August 4, 2003 5:05 PM
Connecting Your TV
17
Connecting a TV, VCR, and Satellite Receiver
1
Connect the coaxial cable from your satellite antenna to SATELLITE IN on the satellite
receiver.
receiver.
2
Connect the coaxial cable from your cable service or antenna to the IN jack on your VCR.
3
Using a coaxial cable (not supplied), connect the OUT jack on your VCR to the VHF/UHF
jack on your TV.
jack on your TV.
4
Using audio/video cables (not supplied), connect AUDIO/VIDEO OUT on your satellite
receiver to AUDIO/VIDEO IN on your VCR.
receiver to AUDIO/VIDEO IN on your VCR.
5
Using audio/video cables (not supplied), connect AUDIO/VIDEO OUT on your VCR to
AUDIO/VIDEO IN on your TV.
AUDIO/VIDEO IN on your TV.
Using your TV with this connection
This connection allows you to do the following:
❏
Program your Sony remote control to operate your VCR or satellite receiver (see page 5).
❏
Turn on your VCR to enable your satellite receiver to work with this connection.
❏
To activate your remote, press
to operate your VCR or
to operate your satellite
receiver.
❏
Press
repeatedly to switch between VCR input (VIDEO input), VHF/UHF
(local channels or unscrambled), or your cable box (cable system or scrambled channels).
✍
To view from the satellite receiver or VCR, select the video input to which your satellite receiver or
VCR is connected by pressing
VCR is connected by pressing
on the remote control.
1
3
4
AUDIO OUT
(VAR/FIX)
(VAR/FIX)
VIDEO
L
(MONO)
R
L
R
(MONO)
S VIDEO
Y
P
B
P
R
5
2
From
cable/
antenna
3
Satellite receiver
1
4
5
VCR
Rear of TV
Audio R (red)
Audio L (white)
Video (yellow)
01US01COV-BR2.book Page 17 Monday, August 4, 2003 5:05 PM
Click on the first or last page to see other KV-27FA210 service manuals if exist.