Sony KP-57WV600 (serv.man2) Service Manual ▷ View online
— 10 —
KP-57WV600
1-1. REAR BOARD REMOVAL
1-2. CHASSIS ASSEMBLY REMOVAL
SECTION 1: DISASSEMBLY
1-3. SERVICE POSITION
���������������
������������
�����������������
�����������������
����������
�
�
�����������
������������
�
�
������������
�����������������
�����������������
Covers
Remove covers from chassis assembly
with pliers when checking printed circuit boards.
After checking, turn the covers over
and re-secure them with the screws.
Remove covers from chassis assembly
with pliers when checking printed circuit boards.
After checking, turn the covers over
and re-secure them with the screws.
Screws
(+BVTP3x12)
(+BVTP3x12)
Chassis assembly
Free wiring from purse locks.
NOTE: Observe wire dress
and return to original condition.
NOTE: Observe wire dress
and return to original condition.
1
2
3 When plugging in connector from
HM Board to B Board at CN3603
insure two brown wires are facing
upward towards the HV block
assembly.
insure two brown wires are facing
upward towards the HV block
assembly.
— 11 —
KP-57WV600
U board
Terminal board
Four screws
(+BVTP 3x12)
Main bracket
1
B board
AD board
Main bracket
BM1C Board
Two screws
((M3) Tapping)
((M3) Tapping)
MB board
U board
1-4. TERMINAL BOARD REMOVAL
1-5. AD BOARD, B BOARD, MB BOARD, BM1C BOARD, AND U BOARD REMOVAL
— 12 —
KP-57WV600
(2) Installation
Gutter
HV cable
Hook
1
Rubber cap
HV cable
turn 90
turn 90
1
2
(1) Removal
�����
������������
�
�����
�
������������
������������
������������
�����������
������������
������������
��������
�������
�������
�
�
������������
������������
������������
�
1-6. D BOARD, A BOARD, AND G BOARD REMOVAL
1-7. HIGH-VOLTAGE CABLE INSTALLATION AND REMOVAL
— 13 —
KP-57WV600
Five screws
Input Terminal Bracket
Four screws
Four screws
Three screws
Input Terminal Cover
Two screws
Two screws
Onescrew
Input Terminal Plate
One screw
One screw
(+BVTP4x16)
(+BVTP3x12)
(+BVTP3x12)
(+BVTP3x12)
(+BVTP3x12)
Grille Assy
HA board
HB board
Dome Washer
(Hex Tap 4 x 20)
(Hex Tap 4 x 20)
1
2
6
5
4
7
3
CAUTION: Removing the arrow-marked screws is strictly prohibited. If removed, it may cause liquid to spill.
�����������
����������������������
����������������������
�����������
������������
������������
������������
������������
���������������
�����������
����������������������
����������������������
�����������
����������������������
����������������������
���������
��������
����
����
�
�
�
�
�
��
��
�
�����
�
�
�
1-8. PICTURE TUBE REMOVAL
1-9. GRILLE, HA BOARD, HM BOARD,
AND HB BOARD REMOVAL
Click on the first or last page to see other KP-57WV600 (serv.man2) service manuals if exist.