DOWNLOAD Sony KP-48PS1 / KP-48PS1K / KP-53PS1 / KP-53PS1K / KP-61PS1 / KP-61PS1K Service Manual ↓ Size: 19.57 MB | Pages: 125 in PDF or view online for FREE

–

 17 

–

Teletext

Most TV channels broadcast information via Teletext. The index page of the teletext service (usually page 100) gives you
information on how to use the service.

Please use a TV channel with a strong signal, otherwise there may be Teletext errors.

Select the TV channel which carries the teletext service you want to
view.

Press the 

 button once for Picture and Teletext (P&T). The screen

is divided in two, with the TV channel in the right corner and the
Teletext display on the left.

P&T mode: Press  /  then press PROGR +/- to change the
channel of the TV screen. Push the joystick to   or   to change
the size of the TV screen then press  /  again to resume
normal teletext reception.

Press 

 twice to get Teletext only.

Press 

 three times for Mix mode.

Press 

 a fourth time or press 

 to switch off Teletext.

Input three digits for the page number using the numbered buttons on
the control. If you make a mistake, type in any three digits then re-enter
the correct page number.

Press the 

 (PROGR +) or 

 (PROGR -) buttons on the remote control

to select the previous or next page.

Selecting a sub page
A teletext page may consist of several sub pages. In this case, after a few
seconds, an information line is displayed showing the number of
subpages.
Select the sub page by pressing   or  .

Press the 

 button to freeze the page. Press again to cancel the freeze.

Press the 

 button to reveal the index page (normally page 100).

Fastext
(only available if the TV station broadcasts Fastext signals)

When the colour coded menu appears at the bottom of a teletext page,
press a coloured button on the remote control (red, green, yellow or
blue) to access the corresponding page.

Press the numbered buttons on the remote control to select a teletext
page which has several page numbers on it (eg the index page).

Press the OK button.

Push the joystick to   or   to select the desired page number then
press the OK buttons. The requested page is displayed after some
seconds.

RM 892

PROGR

MENU

VIDEO

TV

continued ...

Index
Programme
News
Sport
Weather

25

153
101

98

01

Index
Programme
News
Sport
Weather

25

153
101

98

Index
Programme
News
Sport
Weather

25

153
101

98

Index
Programme
News
Sport
Weather

25

153
101

98

Index
Programme
News
Sport
Weather

25

153
101

98

Index
Programme
News
Sport
Weather

25

153
101

98

Index
Programme
News
Sport
Weather

25

153
101

98

Index
Programme
News
Sport
Weather

25

153
101

98

Index
Programme
News
Sport
Weather

25

153
101

98

01

216-02

01

03

04

05

06

07

08

02

RM 892

PROGR

MENU

VIDEO

TV

With Teletext switched on, press the MENU button on the remote
control to display the teletext menu on the TV screen.

Push the joystick to   or   to select your chosen item, then push to 
to display the relevant sub menu.

To remove the teletext menu from the screen, press the MENU
button.

The Top/Bottom/Full sub menu allows you to enlarge different
sections of the Teletext page. Push the joystick   to enlarge the upper
half of the screen, push to   to enlarge the lower half. Press the OK
button to restore the page to normal size.

After having selected this function, you can watch a TV channel while
waiting for a requested Teletext page. As soon as the page is available,
the symbol 

 changes colour. To view the page, press 

.

Some teletext pages contain hidden information (eg for a quiz), which
you can reveal. The hidden information appears on screen.

(depending on availability of teletext service).

You can call up a time-coded page such as an alarm page at a time
specified by you. After you have displayed the Time Page sub menu:

Press the numbered buttons on the remote control to enter the three
digits of the desired page.

Press the numbered buttons again to enter the four digits of the
desired time.

Press the OK button to store the desired time. The time is displayed
in the top left corner of the screen. At the requested time the page is
displayed.

(depending on availability of teletext service).

In the Page Overview menu the block and group pages of TOP- Text are
sorted into two columns, so that the customer can easily select this
page. For each block page in the first column, the corresponding group
pages are shown in the second column. Push the joystick   or   to
select the desired block page, then push to   to enter to the group
pages column. Push to   or   to select the desired group page . Finally,
press the OK button to display the page.

Teletext

Teletext

Top / Bottom / Full

Text Clear

Reveal

Time  Page

Page Overview

Select:

Enter:

Top:

Bottom:

Full: OK

Time  Page

PAGE

TIME

Select Page: 0-9

Next:

- - : - -

– – –

–

 18 

–

RM 892

PROGR

MENU

VIDEO

TV

NexTView is an on-screen electronic programme guide (EPG), providing you with programme information for different
broadcasters.

Your projection TV automatically selects the best NexTView
provider for you. This provider is available about 30 minutes after
the channel tuning. You can however change this selection of
provider if you wish.

Press the MENU button on the remote control to display the menu
on the screen.

Push the joystick to   or   to select the 

 symbol, then push to 

to enter the Set Up menu.

Push to   or   to highlight Select NexTView then push to  . A list
is displayed containing all available NexTView providers.

Push to   or   to select the desired provider then press the OK
button to store.

Press the MENU button to remove the menu from the screen.

Press the   button repeatedly on the remote control to switch
NexTView on and off.
* In some cases, you may also need to push the joystick to   to
display the Sony electronic programme guide.

Push the joystick to  ,  ,   or   buttons to move the cursor around
the screen.

Press the OK button to confirm a selection.
a) If you press the OK button in the date, time or icon (themes)

columns, you change the programme list according to the
selection.

b)If you press the OK button in the programme list, you directly

display the channel if the broadcast is currently running, or, you
display the "Long Info" menu if the broadcast is running at some
future time.

You can make a personal list of the types of programmes you wish
to view on the programme guide.

Push the joystick   or   to select the   icon then push to   to
display the "Individual Setting" menu.

Push the joystick   or   to select your chosen item on the screen
then press the OK button to confirm your choice.

Repeat step 2 for all the items you wish to have in your list.

When you have finished the list, push to   to select the 

 icon.

Press the OK button to return to the previous menu.

Push the joystick   or   to select the   icon then press the OK
button again to activate your "Individual Setting" filter.

NexTView

full selection list
personal selection
news broadcasts
movies
sports
entertainment
children
return to last menu

* (depending on availability of service)

continued ...

Picture Adjustment

Select:

Enter Menu:

Picture Mode
  Contrast
  Brightness
  Colour
  Sharpness
     Reset
AI
Noise Detection
Digital Mode

Personal

On

On

DRC 50

Enter:

Set Up

Auto Tuning
Programme Sorting
Select NexTView
AV Preset
Manual Set Up

Select:

- - - - - - -

7

Tue

07 Tue

12:38

8

Wed

10
Fri

11

Sat

12

Sun

13

Mon

9

Thu

12

SWISS

Star Wars
Super RTL

Hat der alte Hexenmeister sich doch
einmal fortbegeben, und nun sollen
seine Geister auch nach meinem Willen
leben.

Werner - Beinhart
Pro 7

Flui grüsst den Rest der Welt
Kabel 1

Once upon a time in the West
Euronews

International News
RTL Plus

10:35 - 12:45

10:20 - 12:00

10:45 - 10:50

11:00 - 11:20

11:45 - 12:50

TXT

TPS / RINGIER

Tue 07. 04 .98

Set Up

Auto Tuning
Programme Sorting

Select NexTView

AV Preset
Manual Set Up

Select:

Start Auto Tuning

Start

- - - - - - -

RM 892

PROGR

MENU

VIDEO

TV

With this menu screen, you can set timers or record selected
programmes.

Push   or   to select a future programme in the programme list
column.

Press the OK button to display the Long Info menu on the TV
screen.

Push the joystick   or   to highlight the   icon then press the OK
button repeatedly to "set the timer" or "cancel the timer". If you choose
to set the timer, the programme is marked with a clock symbol and a
message appears on the screen shortly before the programme is due to
start asking whether you wish to still view this programme.

Push the joystick   or   to highlight the 

 icon then press the OK

button repeatedly to switch on/off the timer table. This table shows the
programmes on which you have already set a timer. (You can set a
timer on up to 5 programmes).

(only with Smartlink VCRs).

Connect your Smartlink VCR.

Push the joystick to   or   to select 

 then press the OK button to

download the information to your VCR.

To set up the VCR:

VPS/PDC
Push the joystick   or   to select VPS/PDC then press the OK
button repeatedly to select On or Off. With this setting on you have
the guaranteed recording of the whole broadcast should there be a
change in the TV programme. This only works if the selected
channel broadcasts a VPS/PDC signal.

Speed
Push the joystick to   to select Speed then press the OK button
repeatedly to select between SP for standardplay or LP for longplay.
With longplay you can record twice as much on a videotape. The
picture quality however may suffer.

VCR Setup
Push the joystick to   to select VCR Setup then press the OK button
repeatedly to select which VCR you wish to programme, namely
VCR1

 or VCR2.

Finally, push the joystick to   to select the 

 icon then press the

 button to remove the menu from the TV screen.

NexTView

07 Tue

12:38

Address Mapping

The position of the addresses in the
OSDA is shown in the following diagram.
The position values of the DPW are set
to '0'.

If other values are set, the complete
combination will be scrolled.

Example:
if the DPWC is set to '63', the char-

Speed
Timer Prog

VPS/PDC

SP

VCR1

On

This channel has been set for a timer

First nextTView/EPG-Providers in Europe

SWISS

TXT

TPS / RINGIER

nexTView

Tue 07. 04 .98

–

 19 

–

Video/audio from TV tuner

Video/audio from selected source

Video/audio displayed on TV screen (monitor out)

No outputs

Audio signal

No output

No output

No output

Audio signal to headphones

•

Do not connect
equipment to F
and G connectors
at the same time.

Using the following instructions, you can connect a wide range of optional equipment to your projection TV.

Optional Connections

8mm/Hi8/DVC
camcorder

S.VHS/Hi8/DVC
camcorder

VCR

Hi-Fi

Decoder

VCR

F

H

I

A

B

C

D

E

F

Audio/video and RGB signal

Audio/video and S video signal

Audio/video and S video signal

Centre speaker input Set “Speaker”
 on the Features menu to “Centre in”.

No inputs

S Video signal

Video signal

Audio signal

No input

G

H

I

DVD

Rear of projection TV

Front of projection TV

A

B

Dolby

Surround
Amplifier

Optional Connections

We recommend you connect your VCR to the B or 

 socket using a scart lead. If you do not have a scart lead, use

the “Manually Tuning the TV” section of this instruction manual to tune in the channel of the VCR test signal to TV
programme number “0”. Also refer to your VCR instruction manual to get the VCR test signal.
If your video supports Smartlink please refer to the "Smartlink" section of this instruction manual.

Plug in your Hi-Fi equipment to the 

 sockets on the rear of the projection TV if you wish to amplify the audio

output from the TV.
The output level from 

 sockets can be varied by adjusting the volume of the headphones. Refer to the

“Adjusting the sound” section of this instruction manual to adjust the volume of the headphones.

Plug in your Dolby Prologic system decoder amplifier to the 

 socket on the rear of the projection TV if you

wish to listen to the audio output from your equipment on the projection TV speaker. If you have a Dolby
amplifier, connect the centre output from your amplifier to the 

 socket to use the projection TV as a centre

speaker. Refer to the “Using the Features menu” section of this instruction manual and set the option “Speaker”
to “Centre in”.

 Remember that the maximum input level of this input is 30 W. Be careful never to over this limit.

For mono equipment
Connect the phono plug to the L/G/S/I socket on the front of the TV and select the 

 

4

 input signal using the

instructions on this page below.

RM 892

PROGR

MENU

VIDEO

TV

Connect your equipment to the designated projection TV socket, as it is indicated on the
previous page.

Press the 

 button repeatedly on your remote control until the correct input symbol

appears on the screen.

• Audio/video input signal through the Scart connector A or * RGB

through Scart connector A

• Audio/Video input signal through the Scart connector B or * S Video

through Scart connector B

• Audio/Video input signal through the Scart connector 

 or * S Video

through Scart connector 

• S Video input signal through the 4-pin DIN connector F or * video input

signal through phono jack 

 and audio input signal through phono jacks H.

* (automatic detection of the signal according to the connected equipment).

Switch on the connected equipment.

To return to the normal TV picture, press the 

 button on the remote control.

3

In order to get the input signal of a connected equipment onto the TV screen,  you need to select the symbol of the
connector to which you have connected the device.
e. g. : Your VCR is connected to the connector with the symbol 

1/

1. Press the button        on the remote control

repeatedly until you see the  symbol        1 on the screen.

–

 20 

–

Smartlink is a direct link between your projection TV set and a VCR.

• A VCR which supports Smartlink, NextView Link, Easy Link or Megalogic.

Megalogic is a trademark of Grundig Corporation.
EasyLink is a trademark of Philips Corporation.

• A fully-wired 21 pin SCART cable to connect your VCR to the Scart connector 

2

 2

(SMARTLINK) on the rear of the Projection TV.

• Tuning information such as the channel overview are downloaded from the projection

TV set to the VCR.

• Direct projection TV recording: While watching TV you need to press just one button on

the VCR to record this programme.

• Automatically switching on: With the projection TV in standby mode, pressing the

"Play  " button on your VCR automatically switches the TV on.

If you have connected a decoder to a VCR which supports Smartlink feature, select
the menu Further Programme Preset in the 

 (Manual Set Up) menu and select

 to each coded channel. For more details, please refer to the section

"Using the Further Programme Preset function" of this instruction manual.

For more information on Smartlink, please refer to the Instruction Manual of your
VCR.

Optional Connections

Using the buttons underneath the cover of the remote control you can
control other Sony equipment.

Open the cover of the Remote Control.

Set the selector VTR 1234 DVD according to the equipment you want to control:
VTR 1

Beta VCR

VTR 2

8 mm VCR

VTR 3

VHS VCR

VTR 4

Digital Video (DCR-VX 1000/9000 E, VHR-1000)

DVD

Digital Video Disk

Use the buttons underneath the cover on the remote control to operate the
equipment.

• If your equipment has a COMMAND MODE selector, set this

selector to the same position as the VTR 1234 DVD selector on the
projection TV Remote Control.

• If the equipment does not have a certain function, the corresponding

button on the remote control will not work.

VIDEO

TV

VTR 1 2 3 4  DVD

C H

C H

VTR 1 2 3 4  DVD

Rear of projection TV

VCR

Decoder

For the best picture quality, try to position the projection TV so that you can view the screen from within the areas
shown below.

Additional Information

(Optimum viewing position)

60˚

60˚

(Optimum viewing position)

20˚

20˚

KP-48PS1: 

minimum 

distance 

2.2 m

KP-53PS1: 

minimum 

distance 

2.4 m

KP-61PS1: 

minimum 

distance 

2.7 m

KP-61PS1: 

minimum 

distance 

2.7 m

KP-53PS1: 

minimum 

distance 

2.4 m

KP-48PS1: 

minimum 

distance 

2.2 m