DOWNLOAD Sony KLV-26NL14A / KLV-32NL14A / KLV-37NL14A Service Manual ↓ Size: 20.54 MB | Pages: 72 in PDF or view online for FREE

120V - 220V AC, 50/60 Hz

135W (KLV-26NL14A Only)
155W (KLV-32NL14A Only)
190W (KLV-37NL14A Only)

Less than 1W 

Y: 1.0 Vp-p, 75 ohms unbalanced, sync negative 

 

 

C: 0.286 Vp-p (Burst signal), 75 ohms

 Video
 

 

1.0 Vp-p, 75 ohms unbalanced, sync negative 

 Audio
   500 

mVrms 

(100% 

modulation)

   Impedance:47 

kilohms

 

 

Y:1.0 Vp-p, 75 ohms unbalanced, sync negative

 

 

P

B

:0.7 Vp-p, 75 ohms

 

 

P

R

:0.7 Vp-p, 75 ohms

 

 

Signal format: 480i, 480p, 720p, 1080i, 1080p

 AUDIO
   500 

mVrms 

(100% 

modulation) 

 

 

Impedance: 47 kilohms

HDMI IN 1/2:
 HDMI: 

Video:480i, 480p, 720p, 1080i, 1080p

 

 

 

Audio: Two channel linear PCM 32, 44.1 and 

 

 

 

    48 kHz, 16, 20 and 24 bits

 AUDIO:  (HDMI In 2 Only) 500 mVrms (100% modulation) 
     Impedance: 

47 

kilohms

AUDIO OUT:
 

500 mVrms (100% modulation)/

 

More than 1 Vrms at the maximum volume setting (Variable)

 

More than 500 mVrms (Fixed)

PC IN:
 

D-sub 15-pin, analog RGB, 0.7 Vp-p, 75 ohms, positive

PC AUDIO INPUT:
 

Stereo mini jack, 500 mVrms (100% modulation)

  

Impedance: 47 kilohms

HEADPHONES:
 Stereo 

mini 

jack

 Impedance: 

 16 ohms

This TV incorporates High-Definition Multimedia Interface (HDMI™) 
technology. HDMI, the HDMI logo and High-Definition Multimedia 
Interface are trademarks or registered trademarks of HDMI Licensing 
LLC.

Blu-ray is a trademark. 

“BRAVIA” and 

, 

, BRAVIA 

Theatre Sync and DMPORT are trademarks or 
registered marks of Sony Corporation.

“PLAYSTATION” is a registered trademark 
and “PS3” is a trademark of Sony Computer 
Entertainment Inc.

Macintosh is a trademark licensed to Apple Computer, Inc., registered in the 
U.S.A. and other countries.

NTSC 3.58/PAL-M/PAL-N Trinorma

VHS: 2-13
UHF: 14-69
CATV: 1-125

75-ohm external terminal for VHF/UHF/CABLE

LCD (Liquid Crystal Display) Panel

1,366 dots x 768 lines

approx. 26 in / 66cm (KLV-26NL14A Only)
approx. 31.5 in / 80cm (KLV-32NL14A Only)
approx. 37 in / 94cm (KLV-37NL14A Only)

Remote Commander RM-YA008
Two Size AA (R6) Batteries
Cable Holder
Operating Instructions
Quick Setup Guide
Safety & Regulatory Booklet

Headphones Plug Adapter
Connecting Cables
Wall-Mount Bracket
  SU-WL100 (KLV-26NL14A Only)
  SU-WL500 (KLV-32NL14A/37NL14A Only)
75-ohm coaxial cable
HD15-HD15 cable

778 x 515 x 232 mm

912 x 590 x 232 mm

1028 x 654 x 232 mm

30

3/4

 x 21

3/8

 x 9

1/4

in

36 x 23

1/4

 x 9

1/4

 in

40

1/2

x 25

3/4

x 9

1/4

in

778 x 468 x 100 mm

912 x 543 x 102 mm

1028 x 608 x 113 mm

30

3/4

 x 18

1/2

 x 4 in

36 x 21

1/2

 x 4

1/8

 in

40

1/2

x 24 x 4

1/2

in

200 x 100 mm

200 x 200 mm

300 x 300 mm

11.5 kg

14.5 kg

18.5 kg

26 lbs

32 lbs

41 lbs

10 kg

13 kg

17 kg

23 lbs

29 lbs

38 lbs

All measurements are approximations.

20W (10W x 2)

5

3/4

 x 1

3/8

in

146 x 35 mm

These servicing instructions are for use by qualifi ed service personnel only. To reduce the risk of electric shock, do not perform any servicing other 
than that contained in the operating instructions unless you are qualifi ed to do so.

To avoid dropping the TV and causing serious injury, be sure to follow 
these guidelines:
s Before carrying the TV, disconnect all cables.

s Carrying the large size TV requires two or more people.

s When you carry the TV, place your hand as illustrated and hold it 

securely. Do not put stress on the LCD panel.

s When lifting or moving the TV, hold it firmly from the bottom. Place 

your palm directly under the panel.

s When carrying, do not subject the TV to shocks or vibration, or 

excessive force.

s Place your palm directly underneath, but do not squeeze the

panel’s speaker grill area.

An isolation transformer should be used during any service to avoid possible shock hazard, because of live chassis. The chassis of this receiver is 
directly connected to the ac power line.

!

 SAFETY-RELATED COMPONENT WARNING!!

Components identifi ed by shading and ! mark on the schematic diagrams, exploded views, and in the parts list are critical for safe operation. Replace 
these components with Sony parts whose part numbers appear as shown in this manual or in supplements published by Sony. Circuit adjustments that 
are critical for safe operation are identifi ed in this manual. Follow these procedures whenever critical components are replaced or improper operation is 
suspected. 

There are critical components used in LCD color TVs that are important for safety. These components are identifi ed with shading and 

mark on the schematic diagrams and the electrical parts list. It is essential that these critical parts be replaced only with the part number 
specifi ed in the electrical parts list to prevent electric shock, fi re, or other hazard. 

NOTE: Do not modify the original design without obtaining written permission from the manufacturer or you will void the original parts and 
            labor guarantee. 

When installing the LCD panel on a wall, the LCD panel must be secured using the 4 mounting holes on the rear cover. 

 do not press on the panel or frame edge to avoid the risk of electric shock.

  do not scratch or press on the panel with any sharp objects.

  do not leave the module in high temperatures or in areas of high humidity for an extended period of time.

  do not expose the LCD panel to direct sunlight.

  avoid contact with water. It may cause a short circuit within the module. 

  disconnect the AC adapter when replacing the backlight (CCFL) or inverter circuit. 

(High voltage occurs at the inverter circuit at 650Vrms.) 

  always clean the LCD panel with a soft cloth material.

  use care when handling the wires or connectors of the inverter circuit. Damaging the wires may cause a short. 

  protect the panel from ESD to avoid damaging the electronic circuit (C-MOS).