Sony KLV-22P413D / KLV-24P413D / KLV-24P423D Service Manual ▷ View online
53
APPENDIX-3 Operation Time, Boot Count, Panel Operation Time
SELF DIAGNOSTIC HISTORY DISPLAY >> Operation Time, Boot Count, Panel Operation Time
*Below information is just for example, and may not match the actual info you see on consumer’s TV set.
Although this model does not support Self Diagnostic
Press “Return” key or “Home” key on RC to exit the Self Diagnostic screen.
Press “Return” key or “Home” key on RC to exit the Self Diagnostic screen.
SELF CHECK
BACK
<<
12345-67891-23456
[Home] Exit
Total operation time by hour
Boot count
Panel operation time by hour
Service Mode
Status Information
>>
Self diagnosis history
>>
No SIGNAL MUTE
<[
Off
]>
TUNING SYSTEM <[
AUTO
]>
Low of HPD
<[
5
]>
SERIAL NUMBER EDIT
AB11345
MODEL NAME EDIT
KLV-22P413D
Test Reset
<[
Off
]>
[</>]Set[Home]Exit
After repair or board exchange, you can reset the Self Diagnosis
history to (0, 0, 0) by here.
Just move the cursor to “Test Reset” and then press Right key ,
Just move the cursor to “Test Reset” and then press Right key ,
the “Off” will change to “On”, then TV will reboot and you will
need to perform Initial Setup.
KLV-22P413D/24P413D/24P423D(IN5)
54
APPENDIX-4 Reset and Edit Serial Number
HOW TO EDIT SERIAL NUMBER
1) Enter Service menu first, and check the color of the text “SERIAL NUMBER EDIT”.
If the text color is white, then you can press remote commander “Right ” to start edit the serial number.
If the text color is
If the text color is white, then you can press remote commander “Right ” to start edit the serial number.
If the text color is
orange
, then you need to Reset the serial number in factory menu before you can edit.
2) You can edit the serial number by using the arrow keys (Up, Down) to select the number you need, and
use (Left, Right) to shift to next digit.
use (Left, Right) to shift to next digit.
3) When finish, please press “Enter” to save (store) the result.
***A pop up dialogue will display for you to confirm the result before save, see below example:
***A pop up dialogue will display for you to confirm the result before save, see below example:
Input Data Correct ?
YES
NO
This means YES (cursor on text is black)
4) After edit, the color of serial number text will change to
orange
like below:
SERIAL NUMBER EDIT
8500001
SERIAL NUMBER EDIT
AB12345
SERIAL NUMBER EDIT
A
B 1 2 3 4 5
Cursor on text is orange, you can use Up and Down key to
select the number you want
KLV-22P413D/24P413D/24P423D(IN5)
55
APPENDIX-4
KLV-22P413D/24P413D/24P423D(IN5)
HOW TO RESET SERIAL NUMBER
1) Enter Factory menu by pressing the buttons on the remote commander:
Left Right Mute Enter Mute HOME
2) Move cursor to “SN Reset” (cursor on text is orange), then press Enter.
While system is resetting the serial number, LED will go out.
Please wait for the LED to turn on (green) again, you will see the menu item display like below:
SN Reset : Press
SN Reset : Ok
This means reset ok, you can edit serial
number in service menu now.
**Notice: After reset you will see the default serial
number display in service menu as AB12345
55
APPENDIX-4
KLV-22P413D/24P413D/24P423D(IN5)
HOW TO RESET SERIAL NUMBER
1) Enter Factory menu by pressing the buttons on the remote commander:
Left Right Mute Enter Mute HOME
2) Move cursor to “SN Reset” (cursor on text is orange), then press Enter.
While system is resetting the serial number, LED will go out.
Please wait for the LED to turn on (green) again, you will see the menu item display like below:
SN Reset : Press
SN Reset : Ok
This means reset ok, you can edit serial
number in service menu now.
**Notice: After reset you will see the default serial
number display in service menu as AB12345