Sony KLV-22P413D / KLV-24P413D / KLV-24P423D Service Manual ▷ View online
DISASSEMBLY AND PARTS LIST
21
1-2-2 REAR COVER
PART No.
DESCRIPTION
MARK
4-581-743-01 COVER, REAR 24
KLV-24P413D
4-581-743-11 COVER, REAR 24
KLV-24P423D
4-581-741-21 LABEL, SIDE IO 24
KLV-24P413D
4-581-741-31 LABEL, SIDE IO 24
KLV-24P423D
2. Use 2 PCS T3X8 PN:7-685-646-79
screw to fix VESA bracket on rear
cover.
screw to fix VESA bracket on rear
cover.
3. Stick the mylar on rear cover
and mylar inside of indentation .
and mylar inside of indentation .
1. Stick label on the rear cover and label must inside of indentation.
KLV-24P413D PN: 4-581-743-01
KLV-24P423D PN :4-581-743-11
KLV-24P413D/24P423D(IN5)
1-2. KLV-24P413D/KLV-24P423D
DISASSEMBLY AND PARTS LIST
22
1-2-3 A BOARD AND SPEAKER
PART No.
DESCRIPTION
MARK
1-895-861-31
MOUNTED PWB A
KLV-24P413D
1-895-861-41
MOUNTED PWB A
KLV-24P423D
4-581-744-01
BRACKET, SIDE IO 24
KLV-24P413D
4-581-744-11
BRACKET, SIDE IO 24
KLV-24P423D
1-859-123-11
LOUDSPEAKER (12W)
1.Assy Speaker. Insert the connector to speaker.
2.Assy MB on Side Jack. Check
every component have I/O hole
and fix screw 3 PCS M3x6 PN:
every component have I/O hole
and fix screw 3 PCS M3x6 PN:
2-990-421-41 screw .
3. Installation MB assembly on panel, fix
2 PCS M3X6 PN:
2 PCS M3X6 PN:
2-990-421-41 screw.
KLV-24P413D/24P423D(IN5)
1-2. KLV-24P413D/KLV-24P423D
DISASSEMBLY AND PARTS LIST
23
DISASSEMBLY AND PARTS LIST
1-2-4 KEYPAD MDUDLE
1.Gently press, installation the positioning column
4.Installation screw
2.Installation Key Board
3.Inspection hook is in place
PART No.
DESCRIPTION
MARK
1-493-091-11
SWITCH UNIT
4-581-805-01
BRACKET, KEY
5.Installation SWITCH UNIT on the key cover and check hook
assembly well.
assembly well.
KLV-24P413D/24P423D(IN5)
1-2. KLV-24P413D/KLV-24P423D
DISASSEMBLY AND PARTS LIST
24
Press
1-2-5 LCD PANEL AND BEZEL
PART No.
DESCRIPTION
MARK
4-581-742-01
BEZEL 24
KLV-24P413D
4-581-742-11
BEZEL 24
KLV-24P423D
4-581-861-01
LENS
3. Insert 1 PCS LENS into LED
hole of bezel , small side is down.
hole of bezel , small side is down.
4. Use flat jig to press LENS,
LENS can not over bezel.
LENS can not over bezel.
2. Check every panel hook assemble
well. Check bezel protection film
cannot clip by panel
well. Check bezel protection film
cannot clip by panel
1. Insert panel on bottom side firstly, then
slow rotate to assemble panel on bezel.
slow rotate to assemble panel on bezel.
2
Hook
KLV-24P413D/24P423D(IN5)
1-2. KLV-24P413D/KLV-24P423D
Click on the first or last page to see other KLV-22P413D / KLV-24P413D / KLV-24P423D service manuals if exist.