DOWNLOAD Sony KDL-65S990A Service Manual ↓ Size: 5.73 MB | Pages: 30 in PDF or view online for FREE

KDL-65RS990A 1

Television system

ATSC (8VSB terrestrial): ATSC compliant 8VSB

QAM on cable: ANSI/SCTE 07 2000 (Does not include CableCARD functionality)

Channel coverage

Analog Cable: 1 - 135 / Digital Cable: 1 - 135

Panel system
Speaker output

CABLE/ANTENNA

VIDEO IN 1
COMPONENT IN

VIDEO IN 2

YP

B

P

R 

 (Component Video): 1080p (60 Hz), 1080i (60 Hz), 720p (60 Hz), 480p, 480i 

Audio input (phono jacks)
Video input (common phono pin with Y input)

HDMI IN 1/2/3/4 

480p, 480i, PC Formats

Video (3D):
Frame Packing: 1080p (30 Hz), 1080/24p, 1080i (60 Hz), 720p (30, 60 Hz), 720/24p
Side-by-Side: 1080p (60 Hz), 1080/24p, 1080i (60 Hz), 720p (60 Hz)
Over-Under: 1080p (30, 60 Hz), 1080/24p, 1080i (60 Hz), 720p (60 Hz)
Audio: Two channel linear PCM: 32, 44.1 and 48 kHz, 16, 20 and 24 bits, Dolby Digital
ARC (Audio Return Channel) (HDMI IN 1 only)

MHL 

(Common with HDMI IN 2) 

Video (2D): 1080p (30 Hz), 1080/24p, 1080i (60 Hz), 720p (30, 60 Hz), 720/24p, 480p, 480i 
Video (3D): 
Side-by-Side: 1080/24p, 1080i (60 Hz), 720p (60 Hz) 
Over-Under: 1080p (30 Hz), 1080/24p, 1080i (60 Hz), 720p (60 Hz) 
Audio: Two channel linear PCM: 32, 44.1 and 48 kHz, 16, 20 and 24 bits, Dolby Digital

AUDIO OUT/Headphones
DIGITAL AUDIO OUT 

(OPTICAL)

Digital optical jack (Two channel linear PCM, Dolby Digital)

USB/DLNA

(These jacks are for receiving the external control signal)

NTSC: American TV standard 

Analog terrestrial: 2 - 69 / Digital terrestrial: 2 - 69

LCD (Liquid Crystal Display) Panel
10 W + 10 W + 10 W + 10 W

75-ohm external terminal for RF inputs
Video / Audio input (phono jacks)

Video (2D): 1080p (30, 60 Hz), 1080/24p, 1080i (60 Hz), 720p (30, 60 Hz), 720/24p, 

Stereo mini jack (support Subwoofer Out)

LAN

10BASE-T/100BASE-TX connector (Connection speed may differ depending on the network

environment. 10BASE-T / 100BASE-TX communication rate and communication quality

are not guaranteed for this TV)
Refer to the i-Manual for supported formats

REMOTE

RS232C, Serial Control mini jack; IR IN mini jack

Optional accessories

Support Belt Kit
Camera and Microphone Unit: CMU-BR200/CMU-BR100
USB Wireless LAN Adapter: UWA-BR100
Passive 3D Glasses: TDG-500P

SimulView™ Passive Glasses: TDG-SV5P

Operating temperature

Connecting Cables

32 ºF – 104 ºF (0 ºC – 40 ºC)

* Screen size, dimensions and mass are approximate values.

•

Optional accessories availability depends on countries/region/TV model/stock.

•

Design and specifications are subject to change without notice.

Power requirement
Power 

consumption

in use
in standby

Screen size*

(inches measured diagonally)

64,5 inches

(65 class)

Display resolution 

Dimensions

 * with stand

(inches)

1,648 × 862 × 335

65 × 34 × 13 

1

/

4

without stand  (mm)

(inches)

1,633 × 843 × 122

64 

3

/

8

 × 33 

1

/

4

 × 4 

7

/

8

wall-mount hole 

pattern

400 × 400

wall-mount screw 

size

M6 (8-12 mm)

Mass *

with stand 

(kg)/(lb)

48,1 / 106,0

without stand 

(kg)/(lb)

45,6 / 100,5

110-240 V AC, 50/60 Hz (USA / Canada 120 V AC, 60 Hz)

232 W

Less than 0,15 W with 120 V AC and less than 0,3 W with 240 V AC

1,920 dots (horizontal)  × 1,080 lines (vertical)

(mm)

(mm)

(mm)

*

1

Please refer to the model name printed on  

the remote control.

KDL-65RS990A 2

HSC-NO BT WIFI Board Mounted

HIR

Board

Mounted

 POWER BOARD  

 (LD) 

 MAIN BOARD  

 (BA2SC) 

POWER

 SUPPLY 

BOARD

(G7B)

SWITCH UNIT 

K BOARD 

POWER

 SUPPLY 

BOARD

(G6)

TCON 

HSC-CM-BT Board Mounted

Bluetooth Module

WLAN Module

HW Board Mounted

KDL-65RS990A 3

KDL-65S990A 4

Before servicing the Television:

1.  Verify the TV has the symptom the customer indicated.

2.  Check to see if the latest Software is installed.

a. If not, install the latest version. 

3.  Determine the replacement part required.

When an error is detected, the Self Check screen records the number of 

times the error occurred. This is helpful in confirming past occurrences of an 
error and for determining if an error is intermittent when the customer is not 
sure what is causing the television to shut down. If the screen displays a “0”, 
no error has occurred.

1.  Press 

POWER

 to turn on the TV and then turn it off again.

2.  Press the following buttons on the 

Remote Commander within 1 

second of each other: 

 

DISPLAY

 

 Channel 

5

 

 Volume 

-

 

 

POWER

NOTE:

 This differs from accessing Service Adjustments Mode (Volume +).