DOWNLOAD Sony KDL-65HX729 Service Manual ↓ Size: 12.52 MB | Pages: 85 in PDF or view online for FREE

Model
KDL-65HX729
Pages
85
Size
12.52 MB
Type
PDF
Document
Service Manual
Brand
Device
TV
File
kdl-65hx729.pdf
Date
PREV: Sony KDL-60EX720 / KDL-60EX723 (serv.man2) Service Manual

Sony KDL-65HX729 Service Manual ▷ View online

KDL-65HX729 63
SECTION 7 - SERVICE ADJUSTMENTS
UPDATING SERVICE ADJUSTMENT DATA 
WHEN REPLACING THE LCD PANEL
Before proceeding, update the software to the latest version. After 
updating the software, go into Service Mode to make the appropriate 
adjustments to the copy the data onto the panel. 
 
● Copy the BU Flash Data
 
● Confirm Model ID and Product ID
 
● Reset the Panel Operation Time
COPYING THE BU FLASH DATA
This procedure is to copy the White Balance adjustment data from 
the TCON Board to the Main Board. The BU Flash service item is 
under the VPC service menu. 
1.  TV must be in standby mode. (Power off).
2.  Access Service Mode by pressing the following buttons 
on the Remote Commander within a second of each 
other: 
 
DISPLAY
   Channel 
5
   Volume 
+
   
POWER
.
DIGITAL
SERVICE
001 OP
000 VERS   
---
<MAIN>
<EXT>
DM1.301W00AA
RF:01.05
WF1.003W00AA
WF:2.0.0.99
DF1.001W00AA
WF:0B
YM1.010W00AA
CAN:X.XXX
DB2.105W00AA
FDlXXXX
(DM1.301W00A)
DD1.016W00AA
WP0.521W00AA
<PEM>
MID:5D35E90F
PM1.012W00LU
PID:021A0000
PB1.000W00LU
PNL:V645H1-LE1
POP:X.XXX
PL1.011J46LUX
PD1.011J46LUX
3.  Press 
JUMP
 or 
OPTIONS
 on the Remote Commander 
until the 
VPC menu displays.
VPC
SERVICE
000 
000 
DATA_COPY 
BU_TRANS            0
KDL-65HX729 64
SECTION 7 - SERVICE ADJUSTMENTS
4.  Press 
2
 to move to the
 001 DATA_BAKUP category 
and the 
000 BU_FLASH item.
VPC
SERVICE
001 
000 
DATA_BAKUP 
BU_FLASH            0
5.  To change the data value of the 
BU_FLASH, press 
3
 
to increase the data value to 
1.
VPC
SERVICE
001 
000 
DATA_BAKUP 
BU_FLASH            1
 
NOTE: If the message displays “
DATA TRANSFER NG
” 
the transfer is not complete. If that occurs, repeat step 
5
.
VPC
SERVICE
001 
000 
DATA_BAKUP 
BU_FLASH            2
DATA TRANSFER NG
 
If successful, the data value changes to 
3.
VPC
SERVICE
001 
000 
DATA_BAKUP 
BU_FLASH            3
DATA TRANSFER SUCCESS
6.  Verify the 
Data Transfer Success message displays.
7.  Proceed to “Confirming the Model ID and Product ID.”
CONFIRMING THE MODEL ID AND PRODUCT ID
After completing all of the service adjustment changes, verify that 
the correct Model ID and Product ID displays in the Service menu.
Verify before proceeding to the next step:
 
;
Copied the BU Flash Data
8.  Press 
JUMP
 or 
OPTIONS
 on the Remote Commander 
until the 
DIGITAL menu displays.
9.  If necessary, press 
4
 to move to the
 001 OP category.
KDL-65HX729 65
SECTION 7 - SERVICE ADJUSTMENTS
DIGITAL
SERVICE
001 OP
000 VERS   
---
<MAIN>
<EXT>
DM1.301W00AA
RF:01.05
WF1.003W00AA
WF:2.0.0.99
DF1.001W00AA
WF:0B
YM1.010W00AA
CAN:X.XXX
DB2.105W00AA
FDlXXXX
(DM1.301W00A)
DD1.016W00AA
WP0.521W00AA
<PEM>
MID:5D35E90F
PM1.012W00LU
PID:021A0000
PB1.000W00LU
PNL:V645H1-LE1
POP:X.XXX
PL1.011J46LUX
PD1.011J46LUX
10. Using the information provided in the Segment Code 
table below, verify the Model ID and Product ID are 
correct.
Model Name
Destination
LCD Panel 
Code
Model‐ID
Product‐ID
KDL‐65HX729
US
V645H1‐LE1 5D35E90F
021A0000
KDL‐65HX729
CND
V645H1‐LE1 5D35E90F
021A0000
DIGITAL
SERVICE
001 OP
000 VERS   
---
<MAIN>
<EXT>
DM1.301W00AA
RF:01.05
WF1.003W00AA
WF:2.0.0.99
DF1.001W00AA
WF:0B
YM1.010W00AA
CAN:X.XXX
DB2.105W00AA
FDlXXXX
(DM1.301W00A)
DD1.016W00AA
WP0.521W00AA
<PEM>
MID:5D35E90F
Model ID
Software Version
Panel ID
Product ID
PM1.012W00LU
PID:021A0000
PB1.000W00LU
PNL:V645H1-LE1
POP:X.XXX
PL1.011J46LUX
PD1.011J46LUX
11. Exit service mode by pressing 
HOME
 and then turn the 
TV power off.
12. Cycle AC Power. 
(Unplug and Plug AC Cord from the AC Outlet).
13. Wait a minute while lights flash, and initial setup screen 
shows.
14. Proceed to “
Resetting the Panel Operation Time
”.
KDL-65HX729 66
SECTION 7 - SERVICE ADJUSTMENTS
RESETTING THE PANEL OPERATION TIME
After completing all steps, reset the panel operation time from the 
Self Check screen.
Verify before proceeding to the next step:
 
;
Copied the BU Flash Data
 
;
Confirmed Model ID and Product ID
1.  TV must be in standby mode. (Power off).
2.  Press the following buttons on the Remote Commander 
within a second of each other: 
 
DISPLAY
   Channel 
5
   Volume 
-
   
POWER
.
   
 
 
 
 
              
 
* NOTE: This differs from accessing Service Adjustments Mode 
(Volume +)
Panel operation time
Panel operation time 
--------------   --------------  --------------  01
--------------   --------------  --------------  00
--------------   --------------  --------------  00
--------------   --------------  --------------  00
--------------   --------------  --------------  00
--------------   --------------  --------------  00
002 MAIN_POWE
003 DC_ALERT
003 AUD_PROT
004 BALANCER
005 HFR_ERR
005 P_ID_ERR
12345-00333-06789
12345
-
00333
-
06789
-
-
--------------   --------------  --------------  00
006 VLED
--------------   --------------  --------------  00
005 TCON_ERR
--------------   --------------  --------------  00
--------------   --------------  --------------  00
--------------   --------------  --------------  00
006 BACKLITE
007 TEMP_ERR
010 EMITTER
--------------   --------------  --------------  00
007 FAN_ERR
--------------   --------------  --------------  00
012 IA
--------------   --------------  --------------  00
SELF CHECK                   
--------------   --------------  --------------  00
--------------   --------------  --------------  00
101 VPC_WDT
--------------   --------------  --------------  00
102 MEPS_WDT
--------------   --------------  --------------  00
103 HOST_WDT
--------------   --------------  --------------  00
104 STBY_WDT
--------------   --------------  --------------  00
000 RGB_SEN
000 RESERVED
000 RESERVED
3.  To clear the LCD Panel operating hours of the LCD 
Panel after replacing the panel, press 
7
 
 
0
.
Panel operation time
Panel operation time 
--------------   --------------  --------------  01
--------------   --------------  --------------  00
--------------   --------------  --------------  00
--------------   --------------  --------------  00
--------------   --------------  --------------  00
--------------   --------------  --------------  00
002 MAIN_POWE
003 DC_ALERT
003 AUD_PROT
004 BALANCER
005 HFR_ERR
005 P_ID_ERR
12345-00333-06789
12345
-
00333
-
00000
-
-
--------------   --------------  --------------  00
006 VLED
--------------   --------------  --------------  00
005 TCON_ERR
--------------   --------------  --------------  00
--------------   --------------  --------------  00
--------------   --------------  --------------  00
006 BACKLITE
007 TEMP_ERR
010 EMITTER
--------------   --------------  --------------  00
007 FAN_ERR
--------------   --------------  --------------  00
012 IA
--------------   --------------  --------------  00
SELF CHECK                   
--------------   --------------  --------------  00
--------------   --------------  --------------  00
101 VPC_WDT
--------------   --------------  --------------  00
102 MEPS_WDT
--------------   --------------  --------------  00
103 HOST_WDT
--------------   --------------  --------------  00
104 STBY_WDT
--------------   --------------  --------------  00
000 RGB_SEN
000 RESERVED
000 RESERVED
4.  Exit Self Check by pressing 
HOME
 and then turn the TV 
power off.
5.  Cycle AC Power. 
(Unplug and Plug AC Cord from the AC Outlet).
Page of 85
Display

Click on the first or last page to see other KDL-65HX729 service manuals if exist.

RANDOM: