DOWNLOAD Sony KDL-55V5100 Service Manual ↓ Size: 10.31 MB | Pages: 63 in PDF or view online for FREE

1   Slide out both Loudspeakers from Bezel

2   Remove 1 screw from Under Bar

3   Disconnect 1 connector from HSR Board and remove from IR Guide

4   Release hook and remove IR Guide from Bezel

5   Disconnect 1 connector from HLR4 Board and remove from LED Guide

6   Release hook and remove LED Guide from Bezel

Soft Cloth

Loudspeaker

Loudspeaker

DETAIL-A

DETAIL-A

LED Guide

Under Bar

HLR4 Board

Bezel

Bezel

1

1

5

6

IR Guide

HSR Board

4

3

2 Screw,

+BVTP2 4X16

1   Disconnect 1 connector, then remove LVDS cable and holder from TCON and LCD panel

2   Remove 2 screws and release LCD panel from Bezel

3   Disconnect 3 connectors from Inverter Boards

4   Remove 3 screws to detach Heat Sink from LCD Panel

5   Carefully remove Radiation Sheet from Heat Sink and LCD Panel

 

NOTE: Heat Sink and Radiation Sheet are not included with the LCD Panel and must be replaced when replacing the LCD panel.
For part number information, refer to the Exploded View Section of this manual.

CAUTION: When cleaning the TV, be sure to unplug the power cord to avoid any chance of electric shock.

  Clean the cabinet of the TV with a dry soft cloth.

  Wipe the LCD screen gently with a soft cloth.

  Stubborn stains may be removed with a cloth slightly moistened with a solution of mild soap and warm water.

  If using a chemically pretreated cloth, please follow the instruction provided on the package.

  Never use strong solvents such as a thinner, alcohol or benzine for cleaning. 

  Periodic vacuuming of the ventilation openings is recommended to ensure to proper ventilation.

Soft Cloth

Bezel

LCD Panel

Heat Sink

Radiation

Sheet

3

1

5

2 Screw,

+BVTP2 4X16

4 Screw,

+PSW M3X8

There are no adjustments necessary for these models. All data has 
been set for optimal viewing for our customers. The following sections 
are for informational purposes only. 

1.  TV must be in standby mode. (Power off).

2.  Press the following buttons on the Remote Commander within a 

second of each other: 

 

DISPLAY   

Channel 

5   

Volume 

+  

  POWER .

CC

DISPLAY

POWER

POWER

Onscreen cursor
and select button

DISPLAY

5

VOLUME+

JUMP

 The 

 logo displays momentarily, then the Service Mode 

list displays.

 

Service/ADC Auto Calibration 

Version: ER2.6-C121  DTT: S255.P033.S077  
Model: 55V5100
Serial :  8000016
Power on Time: 00000H   

Diagnostic and Serial Update 

ADC Auto Calibration 
Clone User Setting 
Direct Log to USB 
Factory Default 

RETURN

Change Back

Exit

Use the following instructions to re-enter the Serial Number of the TV 
after replacing the Main (BM3) Board.

1.  After accessing service mode, press 

 to display the Self Diagnostic 

list.

 

Service Mode/Product Information 

Version: ER2.6-C121  DTT: S255.P033.S077  
Model: 55V5100
Power on Time: 00000H   

Serial :   8000016 

Diagnostic Information

2-MAIN POWER: 

1

3-DC ALERT1:   

0

4-TCON:   0
5-HDMI:

  

 

0

6-Backlight:    

0

7-TEMP:   0
8-HFR:  

 

0

101-WDT:  

0

RETURN

Change Back

Exit

2.  To change the serial number fi eld, press 

 then using the number 

keys on the remote enter the Serial Number of the TV.

3.  To save the Serial Number, press 

. 

4.  To exit Service Mode, press 

.