Sony KDL-46NX810 / KDL-55NX810 / KDL-60NX810 Service Manual ▷ View online
KDL-46NX810/55NX810/55NX811/60NX810
28
SERVICE ADJUSTMENTS
2-2-3. SELECTING THE DESTINATION
After replacing the BUHT Board or the LCD Panel Assembly, the
destination location must be set.
CAUTION: Verify the DESTINATION is set correctly before
proceeding to the next step. If another destination Data
Value is selected, it may possibly corrupt the software which
would require a BUHT Board replacement.
DIGITAL
SERVICE
002 MODEL
000 SEG
21: 2a-1.5
7. Press
1
to move to “
001 DEST” sub Category.
DIGITAL
SERVICE
002 MODEL
001 DEST
03: UC (UC grp)
8. Using the table, press
3
to increase the data value or
6
to decrease the data value, to select the destination of the
TV.
GROUP
DESTINATION
CODE
DATA
VALUE
DESTINATION
UC
3
US/CND
LTN-D
16
MX/
LATIN AMERICA
UC grp
DIGITAL
SERVICE
002 MODEL
001 DEST
03: UC (UC grp)
Data Value
Destination
9. After verifying the destination data value displays,
press
0
to WRITE (Save) the changes.
10. Proceed to “Resetting the Data Value in the Panel Engine
Micro”.
2-2-4. RESETTING THE DATA VALUE IN THE PANEL ENGINE
MICRO
For the models listed in this manual, the Panel Engine Micro must be reset
whenever the BUHT Board, the LCD Panel, the TCON board, or the driver
board is replaced.
11. Press
JUMP or OPTIONS on the Remote Commander until
the
PEM Service Menu displays.
PEM
SERVICE
000 VERSION
MAIN
BOOT
DATA
NLD
NLD DATA
QDL NVM
33
LD1.00
37
1.0018W00LA
1.002W00LA
1.017WA46LF
KDL-46NX810/55NX810/55NX811/60NX810
29
SERVICE ADJUSTMENTS
12. Press
2
to move to the
001 DL category.
PEM
SERVICE
001
000
DL
DLCC
0
13. Press
1
to move to the
001 PRETEND_ID item.
PEM
SERVICE
001
001
DL
PRETEND_ID
0
14. Press
3
to increase the data value to 1.
PEM
SERVICE
001
001
DL
PRETEND_ID
1
Data Value
15. After verifying the data value displays, press
MUTING
to
WRITE (Save) the changes.
16. Press
2
until the
004 TCON_CHANGED category displays.
PEM
SERVICE
004
000
TCON_CHANGED
DATA_TRANS_SET
0
KDL-46NX810/55NX810/55NX811/60NX810
30
SERVICE ADJUSTMENTS
17. For the
DATA_TRANS_SET item, press
3
to increase the
data value to 1.
PEM
SERVICE
004
000
TCON_CHANGED
DATA_TRANS_SET
1
Data Value
18. Press
1
until the
001 DATA_TRANS_EXE item displays.
PEM
SERVICE
004
001
TCON_CHANGED
DATA_TRANS_EXE
0
19. For the
DATA_TRANS_EXE item, press
3
to increase the
data value to 1 to execute the update.
NOTE: A warning message indicating the TV cannot be
turned off displays.
PEM
SERVICE
004
001
TCON_CHANGED
DATA_TRANS_EXE
1
DO NOT POWER OFF
Data Value
Warning
Message
Displays
After the update is complete, the data value changes back to
0 and a message indicating the data transter was successful
displays.
PEM
SERVICE
004
001
TCON_CHANGED
DATA_TRANS_EXE
0
DATA TRANSFER
SUCCESS
Data Value
Confirmation
Message
Displays
KDL-46NX810/55NX810/55NX811/60NX810
31
SERVICE ADJUSTMENTS
20. Press
2
until the
005 LDRV_CHANGED item displays.
PEM
SERVICE
005
000
LDRV_CHANGED
DATA_TRANS_SET
0
21. For the
DATA_TRANS_SET item, press
3
to increase the
data value to 1.
PEM
SERVICE
005
001
LDRV_CHANGED
DATA_TRANS_SET
1
Data Value
22. Press
1
until the
001 DATA_TRANS_EXE item displays.
PEM
SERVICE
005
001
LDRV_CHANGED
DATA_TRANS_EXE
0
23. For the
DATA_TRANS_EXE item, press
3
to increase the
data value to 1 to execute the update.
NOTE: A warning message indicating the TV cannot be
turned off displays.
PEM
SERVICE
005
001
LDRV_CHANGED
DATA_TRANS_EXE
1
Data Value
DO NOT POWER OFF
Warning
Message
Displays
After the update is complete, the data value changes back to
0 and a message indicating the data transter was successful
displays.
24. Proceed to “Verifying the Emitter Output Level”.
Click on the first or last page to see other KDL-46NX810 / KDL-55NX810 / KDL-60NX810 service manuals if exist.