Sony KDL-46NX810 / KDL-55NX810 / KDL-60NX810 Service Manual ▷ View online
KDL-46NX810/55NX810/55NX811/60NX810
16
DISASSEMBLY/PART NUMBER INFORMATION
NOTE: Les composants identifies per un trame et
une marque
!
sont critiques pour la securite.
Ne les remplacer que par une piece portant le
numero specifie.
NOTE: The components identified by shading
and
!
mark are critical for safety. Replace only
with part number specified.
NOTE: The components identified by a red outline and a mark contain
confidential information. Specific instructions must be adhered to whenever
these components are repaired and/or replaced.
See Appendix A: Encryption Key Components in the back of this manual.
1-3. G9/G10/G11 (POWER) BOARDS, BUHT (MAIN) BOARD, HLT BOARD,
WIRELESS LAN CARD AND LCD PANEL ASSEMBLY REMOVAL
REF. NO.
PART NO.
DESCRIPTION
[ASSEMBLY INCLUDES]
107
A-1788-127-A
BUHT BOARD, COMPLETE
AFTER REPLACING THE MAIN BOARD OR THE LCD PANEL, YOU
MUST UPDATE THE SOFTWARE TO THE LATEST VERSION AND
COMPLETE ANY SERVICE ADJUSTMENTS.
108
4-188-665-11
BRACKET, SIDE JACK
109
4-188-666-11
BRACKET, TERMINAL
110
1-474-257-11
G9 BOARD, COMPLETE
(KDL-46NX810/55NX810/55NX811 ONLY)
111
4-188-690-01
SHEET, INSULATION (G)
(KDL-46NX810/55NX810/55NX811 ONLY)
2-990-421-41
SCREW (+PSW) (M3X6)
1-3-1. KDL-46NX810/55NX810/55NX811 ONLY
CAUTION: Refer to
”Special Handling Instructions When Replacing the LCD Panel Assembly” on page 6.
Note: The Tape PWB (H), Side Jack Label, Terminal Label, Insulation Sheet (G) and Attachment GL pieces
are not included with the LCD Panel Assembly and must be replaced when replacing the LCD Panel
Assembly.
A Remove 2 screws from Wireless LAN Card to detach from LCD Panel Assembly
B Gently peel-off HLT Board and Disconnect 1 connector to detach from LCD Panel Assembly
B Gently peel-off HLT Board and Disconnect 1 connector to detach from LCD Panel Assembly
C Gently peel-off Tape PWB (H) to detach from HLT Board
D Remove 9 screws from BUHT Board to detach
D Remove 9 screws from BUHT Board to detach
from LCD Panel Assembly
E Release 2 clips to detach Side Jack Bracket
from BUHT Board
F Release 2 clips to detach Terminal Bracket from
BUHT Board
G Remove 3 screws from G9 Board to detach
from LCD Panel Assembly
H Gently peel-off Insulation Sheet (G)
to detach from LCD Panel Assembly
I Slide-out 2 Attachment GL pieces
to detach from LCD Panel Assembly
107
106
105
108
109
111
110
104
103
102
101
101
NA
P-MOD/T-MOD (LCD PANEL ASSEMLY)
FOR ALL P-MOD/T-MOD (LCD PANEL ASSEMLY) PART NUMBER
INFORMATION REFER TO THE LCD PANELS SERVICE MANUAL
102
4-199-302-01
LABEL, TERMINAL (FOR US)
(KDL-46NX810/55NX810/60NX810 ONLY)
102
4-199-303-01
LABEL, TERMINAL (FOR LA/MX)
(KDL-55NX811 ONLY)
103
4-199-290-01
LABEL, SIDE JACK (L)
104
1-487-819-11
CARD, WIRELESS LAN
105
A-1782-538-A
HLT(STD), BOARD MOUNTED
106
4-195-059-01
TAPE, PWB (H)
REF. NO.
PART NO.
DESCRIPTION
[ASSEMBLY INCLUDES]
Check the
Sony Electronics Service Information
website for any additional service related issues for this model.
D
C
B
E
F
H
I
G
A
THE TERMINAL LABEL
IS NOT INCLUDED
WITH THE REPLACEMENT PANEL.
THE SIDE JACK LABEL
IS NOT INCLUDED
WITH THE REPLACEMENT PANEL.
KDL-46NX810/55NX810/55NX811/60NX810
17
DISASSEMBLY/PART NUMBER INFORMATION
NOTE: Les composants identifies per un trame et
une marque
!
sont critiques pour la securite.
Ne les remplacer que par une piece portant le
numero specifie.
NOTE: The components identified by shading
and
!
mark are critical for safety. Replace only
with part number specified.
NOTE: The components identified by a red outline and a mark contain
confidential information. Specific instructions must be adhered to whenever
these components are repaired and/or replaced.
See Appendix A: Encryption Key Components in the back of this manual.
REF. NO.
PART NO.
DESCRIPTION
[ASSEMBLY INCLUDES]
REF. NO.
PART NO.
DESCRIPTION
[ASSEMBLY INCLUDES]
157
A-1788-127-A
BUHT BOARD, COMPLETE
AFTER REPLACING THE MAIN BOARD OR THE LCD PANEL, YOU
MUST UPDATE THE SOFTWARE TO THE LATEST VERSION AND
COMPLETE ANY SERVICE ADJUSTMENTS.
158
4-188-665-11
BRACKET, SIDE JACK
159
4-188-666-11
BRACKET, TERMINAL
160
1-474-254-11
G10 BOARD, COMPLETE
161
4-193-111-01
SHEET, INSULATION (G60)
162
1-474-255-11
G11 BOARD, COMPLETE
163
4-188-691-01
SHEET, INSULATION (GS)
2-990-421-41
SCREW (+PSW) (M3X6)
F
E
D
G
H
K
I
J
C
B
A
L
M
157
156
155
158
159
161
160
154
153
152
151
162
163
151
NA
P-MOD/T-MOD (LCD PANEL ASSEMLY)
FOR ALL P-MOD/T-MOD (LCD PANEL ASSEMLY) PART NUMBER
INFORMATION REFER TO THE LCD PANELS SERVICE MANUAL
152
4-199-302-01
LABEL, TERMINAL (FOR US)
153
4-199-290-01
LABEL, SIDE JACK (L)
154
1-487-819-11
CARD, WIRELESS LAN
155
A-1782-538-A
HLT(STD), BOARD MOUNTED
156
4-195-059-01
TAPE, PWB (H)
Check the
Sony Electronics Service Information
website for any additional service related issues for this model.
1-3-2. KDL-60NX810 ONLY
CAUTION: Refer to
”Special Handling Instructions When Replacing the LCD Panel Assembly” on page 6.
A Gently peel-off Terminal Label to detach from LCD Panel Assembly
B Gently peel-off Side Jack Label to detach from LCD Panel Assembly
B Gently peel-off Side Jack Label to detach from LCD Panel Assembly
C Remove 2 screws from Wireless LAN Card to detach from LCD Panel Assembly
D Gently peel-off HLT Board and Disconnect 1 connector to detach from LCD Panel Assembly
D Gently peel-off HLT Board and Disconnect 1 connector to detach from LCD Panel Assembly
E Gently peel-off Tape PWB (H) to detach from HLT Board
F Remove 9 screws from BUHT Board to detach from LCD Panel Assembly
G Release 2 clips to detach Side Jack Bracket from BUHT Board
H Release 2 clips to detach Terminal Bracket from BUHT Board
I Slide-out 2 Attachment GL pieces to detach from LCD Panel Assembly
J Remove 3 screws from G10 Board to detach from LCD Panel Assembly
K Gently peel-off Insulation Sheet (G60) to detach from LCD Panel Assembly
L Remove 1 screw from G11 Board to detach from LCD Panel Assembly
M Gently peel-off Insulation Sheet (GS) to detach from LCD Panel Assembly
Note: The Tape PWB (H), Side Jack Label, Terminal Label,
Insulation Sheet (G60), Insulation Sheet (GS) and
Attachment GL pieces are not included with the
LCD Panel Assembly and must be replaced
when replacing the LCD Panel Assembly.
KDL-46NX810/55NX810/55NX811/60NX810
18
DISASSEMBLY/PART NUMBER INFORMATION
NOTE: Les composants identifies per un trame et
une marque
!
sont critiques pour la securite.
Ne les remplacer que par une piece portant le
numero specifie.
NOTE: The components identified by shading
and
!
mark are critical for safety. Replace only
with part number specified.
NOTE: The components identified by a red outline and a mark contain
confidential information. Specific instructions must be adhered to whenever
these components are repaired and/or replaced.
See Appendix A: Encryption Key Components in the back of this manual.
P/N
DESCRIPTION
REMARKS
TOTAL
■
4-167-019-11
SCREW, +PSW M3X8
RC(11), AC CVR(1), SP BOX to PNL(3)
15
□
4-159-298-01
SCREW, +PSW M4X10
RC to BTM FRM(2), BTM FRM to PNL(2)
4
▽
3-452-815-01
SCREW, +PSW M5X20
TABLE-TOP STAND(3)
3
●
2-990-421-41
SCREW (+PSW) (M3X6)
BUHT(9), G9B(3), WIFI(2), ANTENNAS(2), BEZ BTM(3)
19
P/N
DESCRIPTION
REMARKS
TOTAL
■
4-167-019-11
SCREW, +PSW M3X8
RC(13), AC CVR(1)
14
□
4-159-298-01
SCREW, +PSW M4X10
RC to BTM FRM(2), BTM FRM to PNL(2)
4
▽
3-452-815-01
SCREW, +PSW M5X20
TABLE-TOP STAND(3)
3
●
2-990-421-41
SCREW (+PSW) (M3X6)
BUHT(9), G9B(3), WIFI(2), ANTENNAS(2), BEZ BTM(5)
21
P/N
DESCRIPTION
REMARKS
TOTAL
■
4-167-019-11
SCREW, +PSW M3X8
RC(13), AC CVR(1)
14
□
4-159-298-01
SCREW, +PSW M4X10
RC to BTM FRM(2), BTM FRM to PNL(2)
4
▽
3-452-815-01
SCREW, +PSW M5X20
TABLE-TOP STAND(5)
5
●
2-990-421-41
SCREW (+PSW) (M3X6)
BUHT(9), G10(3), G11(1), WIFI(2), ANTENNAS(2), BEZ BTM(5)
22
KDL-46NX810
KDL-55NX810/55NX811
KDL-60NX810
Check the
Sony Electronics Service Information
website for any additional service related issues for this model.
1-4. CLEANING THE LCD PANEL ASSEMBLY
CAUTION: When cleaning the TV, be sure to unplug the power cord to avoid any chance of electric shock.
Clean the cabinet of the TV with a dry soft cloth.
Wipe the LCD screen gently with a soft cloth.
®
Wipe the LCD screen gently with a soft cloth.
®
Stubborn stains may be removed with a cloth slightly moistened with a solution of mild soap and warm
water.
®
If using a chemically pretreated cloth, please follow the instruction provided on the package.
®
Never use strong solvents such as a thinner, alcohol or benzine for cleaning.
®
Periodic vacuuming of the ventilation openings is recommended to ensure the proper ventilation.
1-5. SCREW LEGEND
KDL-46NX810/55NX810/55NX811/60NX810
19
DISASSEMBLY/PART NUMBER INFORMATION
NOTE: Les composants identifies per un trame et
une marque
!
sont critiques pour la securite.
Ne les remplacer que par une piece portant le
numero specifie.
NOTE: The components identified by shading
and
!
mark are critical for safety. Replace only
with part number specified.
NOTE: The components identified by a red outline and a mark contain
confidential information. Specific instructions must be adhered to whenever
these components are repaired and/or replaced.
See Appendix A: Encryption Key Components in the back of this manual.
REF. NO.
PART NO.
DESCRIPTION
[ASSEMBLY INCLUDES]
REF. NO.
PART NO.
DESCRIPTION
[ASSEMBLY INCLUDES]
1-6-2. KDL-60NX810 ONLY
205
1-910-101-74
HARNESS ASSEMBLY
(KDL-46NX810 ONLY)
205
1-910-101-79
HARNESS ASSEMBLY
(KDL-55NX810/55NX811 ONLY)
206
1-910-101-76
CONNECTOR ASSEMBLY 8P
(KDL-46NX810 ONLY)
206
1-910-101-81
CONNECTOR ASSEMBLY 8P
(KDL-55NX810/55NX811 ONLY)
207
1-838-262-11
(LVDS) FLEXIBLE FLAT CABLE 51P
(KDL-46NX810 ONLY)
207
1-838-263-11
(LVDS) FLEXIBLE FLAT CABLE 51P
(KDL-55NX810/55NX811 ONLY)
251
1-838-371-11
CONNECTOR ASSEMBLY
252
1-838-300-11
CONNECTOR ASSEMBLY
253
1-910-101-88
CONNECTOR ASSEMBLY 3P
254
1-910-101-87
CONNECTOR ASSEMBLY 14P
255
1-910-101-89
CONNECTOR ASSEMBLY 5P
1-6-1. KDL-46NX810/55NX810/55NX811 ONLY
CN6150
46”- CN6403
55”- CN6151
CN8500
CN6003
G9
CN6002
CN2602
CN2600
CN5500
CN3800
CN4300
BUHT
SP
SP
HLT
WIFI
ILLUMINATION
MODULE
SWITCH UNI
T
POWER SWITCH
TCON
SP
201
204
203
202
207
206
205
REF. NO.
PART NO.
DESCRIPTION
[ASSEMBLY INCLUDES]
REF. NO.
PART NO.
DESCRIPTION
[ASSEMBLY INCLUDES]
CN2602
CN2600
CN5500
CN3800
CN4300
BUHT
SP
SP
HLT
WIFI
ILLUMINATION
MODULE
SWITCH UNIT
POWER SWITCH
TCON
SP
CN6150
CN6152
CN6102
CN6101
CN6201
CN6003
G10
CN6002
G11
CN6800
CN6702
CN6701
CN6701
CN6801
254
253
252
255
256
257
258
260
259
251
256
1-910-101-84
CONNECTOR ASSEMBLY 12P
257
1-910-101-85
CONNECTOR ASSEMBLY 6P
258
1-910-101-83
HARNESS ASSEMBLY
259
1-910-101-86
CONNECTOR ASSEMBLY 8P
260
1-838-264-11
(LVDS) FLEXIBLE FLAT CABLE 51P)
201
1-838-371-11
CONNECTOR ASSEMBLY
(KDL-46NX810 ONLY)
201
1-838-372-11
CONNECTOR ASSEMBLY
(KDL-55NX810/55NX811 ONLY)
202
1-910-101-78
CONNECTOR ASSEMBLY 14P
(KDL-46NX810/55NX810/55NX811 ONLY)
203
1-910-101-75
CONNECTOR ASSEMBLY 12P
(KDL-46NX810 ONLY)
203
1-910-101-80
CONNECTOR ASSEMBLY 12P
(KDL-55NX810/55NX811 ONLY)
* 204
1-910-060-17
CONNECTOR ASSEMBLY 6P
(KDL-46NX810 ONLY)
* 204
1-910-060-21
CONNECTOR ASSEMBLY 6P
(KDL-55NX810/55NX811 ONLY)
Check the
Sony Electronics Service Information
website for any additional service related issues for this model.
1-6. CONNECTORS
Click on the first or last page to see other KDL-46NX810 / KDL-55NX810 / KDL-60NX810 service manuals if exist.