Sony KDL-46HX729 / KDL-55HX729 Service Manual ▷ View online
KDL-46HX729/55HX729
55
SECTION 6 - DISASSEMBLY/PART NUMBER INFORMATION
NOTE: Les composants identifies per un trame et
une marque
!
sont critiques pour la securite.
Ne les remplacer que par une piece portant le
numero specifie.
NOTE: The components identified by shading
and
!
mark are critical for safety. Replace only
with part number specified.
NOTE: The components identified by a red outline and a mark contain
confidential information. Specific instructions must be adhered to whenever
these components are repaired and/or replaced.
See Appendix A: Encryption Key Components in the back of this manual.
SCREWS
P/N
DESCRIPTION
REMARKS
TOTAL
▲
2-580-608-01
SCREW, +PSW M5X16
TABLE-TOP STAND(3)
3
△
4-256-393-01
SCREW, +PSW M3X6 W12
RC(6), AC CVR(1)
7
■
7-685-648-79
SCREW +BVTP 3X12 TYPE2 IT-3
TRMNL BRKT(1)
1
□
2-580-639-01
SCREW, +BVTP 4X12 TYPE2 IT-3
RC(5)
5
◆
4-257-907-01
JOINT, STAND
RC(2)
2
◇
4-268-126-02
SCREW, ORNAMENTAL M6X12
RC(2)
2
●
2-990-421-41
SCREW (+PSW) (M3X6)
BATV(5), G5(5), WIFI(1), ANTENNAS(2), WIFI HLDRS(2)
15
○
4-167-964-01
SCREW, +PWTP2 4X16
SPKR-L(1), SPKR-R(1)
2
★
7-685-646-79
SCREW +BVTP 3X8 TYPE2 IT-3
HMS3(1)
1
☆
4-259-541-01
USER SCREW ST
HEAD STAND to NECK(1), BASE STAND to NECK(3)
4
▽ 2-580-626-01
SCREW, SP 4-4O UNC
RU MOUNT ASSY(2)
2
P/N
DESCRIPTION
REMARKS
TOTAL
▲
2-580-608-01
SCREW, +PSW M5X16
TABLE-TOP STAND(3)
3
△
4-256-393-01
SCREW, +PSW M3X6 W12
RC(14), AC CVR(1), HORZ PNL BRKTS(3), VRT PNL BRKTS(2)
20
■
7-685-648-79
SCREW +BVTP 3X12 TYPE2 IT-3
NOT IN THIS MODEL
0
□
2-580-639-01
SCREW, +BVTP 4X12 TYPE2 IT-3
RC(7)
7
◆
4-257-907-01
JOINT, STAND
RC(2)
2
◇
4-268-126-02
SCREW, ORNAMENTAL M6X12
RC(4)
4
●
2-990-421-41
SCREW (+PSW) (M3X6)
BATV(5), G6(4), G7(2), WIFI(1), ANTENNAS(2), WIFI HLDRS(2)
16
○
4-167-964-01
SCREW, +PWTP2 4X16
NOT IN THIS MODEL
0
★
7-685-646-79
SCREW +BVTP 3X8 TYPE2 IT-3
TRMNL BRKT(1), HMS3(1)
2
☆
4-259-541-01
USER SCREW ST
HEAD STAND to NECK(1), NECK to BASE STAND(3)
4
▽ 2-580-626-01
SCREW, SP 4-4O UNC
RU MOUNT ASSY(2)
2
KDL-55HX729
KDL-46HX729
KDL-46HX729/55HX729
56
SECTION 6 - DISASSEMBLY/PART NUMBER INFORMATION
NOTE: Les composants identifies per un trame et
une marque
!
sont critiques pour la securite.
Ne les remplacer que par une piece portant le
numero specifie.
NOTE: The components identified by shading
and
!
mark are critical for safety. Replace only
with part number specified.
NOTE: The components identified by a red outline and a mark contain
confidential information. Specific instructions must be adhered to whenever
these components are repaired and/or replaced.
See Appendix A: Encryption Key Components in the back of this manual.
* 301
1-910-802-00
CONNECTOR ASSY 6P
302
1-910-802-22
HARNESS ASSY
303
1-910-801-98
CONNECTOR ASSY 28P
304
1-838-817-11
(LVDS) FLEXIBLE FLAT CABLE Y3 46S
305
1-910-801-18
CONNECTOR ASSY 14P
REF. NO.
PART NO.
DESCRIPTION
[ASSEMBLY INCLUDES]
REF. NO.
PART NO.
DESCRIPTION
[ASSEMBLY INCLUDES]
REF. NO.
PART NO.
DESCRIPTION
[ASSEMBLY INCLUDES]
REF. NO.
PART NO.
DESCRIPTION
[ASSEMBLY INCLUDES]
* 351
1-910-802-00
CONNECTOR ASSY 6P
352
1-910-802-23
HARNESS ASSY
353
1-838-816-11
(LVDS) FLEXIBLE FLAT CABLE Y3 55S
354
1-910-802-21
CONNECTOR ASSY 28P
355
1-910-801-29
CONNECTOR ASSY 14P
* 356
1-910-801-45
CONNECTOR ASSY 7P
* 357
1-838-920-11
CONNECTOR ASSY 2P
* 358
1-838-919-11
CONNECTOR ASSY 2P
NOTE: The RU Board is NOT mounted on the LCD Panel. It is enclosed in the
Top R Bracket and Bottom R Bracket and is mounted on the Rear Cover.
RU
303
301
305
304
302
NOTE: The RU Board is NOT mounted on the LCD Panel. It is enclosed in the
Top R Bracket and Bottom R Bracket and is mounted on the Rear Cover.
RU
354
351
355
357
358
356
353
352
CONNECTORS
KDL-46HX729 ONLY
KDL-55HX729 ONLY
KDL-46HX729/55HX729
57
SECTION 6 - DISASSEMBLY/PART NUMBER INFORMATION
ACCESSORIES AND PACKAGING
3-299-071-05
FLYER, SAFETY
4-273-074-11
FLYER, SAFETY
4-275-462-12
MANUAL, INSTRUCTION (ENGLISH VERSION)
4-275-462-22
MANUAL, INSTRUCTION (FRENCH VERSION)
*
4-270-904-11
SUPPLEMENT(STAND INSTALLATION)
MISCELLANEOUS
X-2560-379-1
BAG, SCREW ASSY (L)
CONTAINS THE FOLLOWING SCREWS
4-259-541-01
USER SCREW ST
(SCREWS TO ATTACH HEAD STAND AND BASE STAND TO NECK)
2-580-608-01
SCREW, +PSW M5X16
(SCREWS TO ATTACH TABLE-TOP STAND TO LCD TV)
For product protection and safety reasons, Sony strongly recommends
that you use the screws provided with the TV
CAUTION: These screws cannot be used to secure the TV to
the Wall Mount Brackets
4-262-708-01
CLAMPER, CABLE
4-281-014-01
DOUBLE SIDED TAPE (PANEL 10)
(KDL-55HX729 ONLY)
ORDER THIS PART WHEN REPLACING THE LCD PANEL
4-272-200-01
DOUBLE SIDED TAPE (PANEL)
(KDL-46HX729 ONLY)
ORDER THIS PART WHEN REPLACING THE LCD PANEL
4-291-833-02
LABEL, ENERGY GUIDE (VEG)
(KDL-46HX729 US ONLY)
4-291-833-12
LABEL, ENERGY GUIDE (VEG)
(KDL-55HX729 US ONLY)
4-257-907-01
JOINT, STAND
(SCREWS USED WHEN STAND IS ATTACHED-NOT USED WITH WALL MOUNTS)
4-100-136-01
SHEET (CORE), C
4-256-443-01
SHEET, RADIATION (BAT-L/V)
ORDER THIS PART WHEN REPLACING THE LCD PANEL
4-256-454-02
SPACER (G A)
(KDL-55HX729 ONLY)
OPTIONAL ACCESSORIES
THE 3D GLASSES LISTED BELOW ARE AVAILABLE THROUGH THE SONY STYLE WEBSITE.
USE THE DESCRIPTION TO LOCATE THE PART AND PRICING INFORMATION
TDG-BR50/B
3D GLASSES (BLACK - SIZE SMALL)
TDG-BR50/P
3D GLASSES (PINK - SIZE SMALL)
TDG-BR50/L
3D GLASSES (BLUE - SIZE SMALL)
TDG-BR100/B 3D GLASSES (BLACK - SIZE ADULT)
TDG-BR200/B
3D GLASSES (SIZE SMALL)
TDG-BR250/B 3D GLASSES (SIZE ADULT)
TDG-BR250/DBL 3D GLASSES - TWO PACK
4-289-288-01
LID, BATTERY COVER FOR 3D GLASSES
1-458-395-21
POLARIZER ADAPTER (FOR BR200 MODEL)
1-458-395-11
POLARIZER ADAPTER (FOR BR250 MODEL)
X-2580-498-1
SUPPORT BELT KIT
1-838-940-11
USB CABLE
SU-WL500
WALL MOUNTING BRACKET
REMOTE COMMANDER
1-489-473-11
REMOTE COMMANDER (RM-YD061)
KDL-46HX729/55HX729
58
SECTION 6 - DISASSEMBLY/PART NUMBER INFORMATION
WIRE DRESSING
KDL-55HX729 ONLY
NOTE: The RU Board is NOT mounted on the LCD Panel. It is enclosed in the
Top R Bracket and Bottom R Bracket and is mounted on the Rear Cover.
RU
FIGURE 6-2. KDL-55HX729 OVERALL WIRE DRESSING
KDL-46HX729 ONLY
NOTE: The RU Board is NOT mounted on the LCD Panel. It is enclosed in the
Top R Bracket and Bottom R Bracket and is mounted on the Rear Cover.
RU
FIGURE 6-1. KDL-46HX729 OVERALL WIRE DRESSING
Click on the first or last page to see other KDL-46HX729 / KDL-55HX729 service manuals if exist.