Sony KDL-46HX729 / KDL-55HX729 Service Manual ▷ View online
KDL-46HX729/55HX729 71
SECTION 7 - SERVICE ADJUSTMENTS
RESETTING THE PANEL OPERATION TIME
After completing all steps, reset the panel operation time from the
Self Check screen.
Verify before proceeding to the next step:
Verify before proceeding to the next step:
;
Copied the BU Flash Data
;
Confirmed Model ID and Product ID
1. TV must be in standby mode. (Power off).
2. Press the following buttons on the Remote Commander
within a second of each other:
DISPLAY
Channel
5
Volume
-
POWER
* NOTE: This differs from accessing Service Adjustments Mode
(Volume +)
Panel operation time
Panel operation time
-------------- -------------- -------------- 01
-------------- -------------- -------------- 00
-------------- -------------- -------------- 00
-------------- -------------- -------------- 00
-------------- -------------- -------------- 00
-------------- -------------- -------------- 00
002 MAIN_POWE
003 DC_ALERT
003 AUD_PROT
004 BALANCER
005 HFR_ERR
005 P_ID_ERR
12345-00333-06789
12345
-
00333
-
06789
-
-
-------------- -------------- -------------- 00
006 VLED
-------------- -------------- -------------- 00
005 TCON_ERR
-------------- -------------- -------------- 00
-------------- -------------- -------------- 00
-------------- -------------- -------------- 00
-------------- -------------- -------------- 00
006 BACKLITE
007 TEMP_ERR
010 EMITTER
-------------- -------------- -------------- 00
007 FAN_ERR
-------------- -------------- -------------- 00
012 IA
-------------- -------------- -------------- 00
SELF CHECK
-------------- -------------- -------------- 00
-------------- -------------- -------------- 00
101 VPC_WDT
-------------- -------------- -------------- 00
102 MEPS_WDT
-------------- -------------- -------------- 00
103 HOST_WDT
-------------- -------------- -------------- 00
104 STBY_WDT
-------------- -------------- -------------- 00
000 RGB_SEN
000 RESERVED
000 RESERVED
3. To clear the LCD Panel operating hours of the LCD
Panel after replacing the panel, press
7
0
.
Panel operation time
Panel operation time
-------------- -------------- -------------- 01
-------------- -------------- -------------- 00
-------------- -------------- -------------- 00
-------------- -------------- -------------- 00
-------------- -------------- -------------- 00
-------------- -------------- -------------- 00
002 MAIN_POWE
003 DC_ALERT
003 AUD_PROT
004 BALANCER
005 HFR_ERR
005 P_ID_ERR
12345-00333-06789
12345
-
00333
-
00000
-
-
-------------- -------------- -------------- 00
006 VLED
-------------- -------------- -------------- 00
005 TCON_ERR
-------------- -------------- -------------- 00
-------------- -------------- -------------- 00
-------------- -------------- -------------- 00
-------------- -------------- -------------- 00
006 BACKLITE
007 TEMP_ERR
010 EMITTER
-------------- -------------- -------------- 00
007 FAN_ERR
-------------- -------------- -------------- 00
012 IA
-------------- -------------- -------------- 00
SELF CHECK
-------------- -------------- -------------- 00
-------------- -------------- -------------- 00
101 VPC_WDT
-------------- -------------- -------------- 00
102 MEPS_WDT
-------------- -------------- -------------- 00
103 HOST_WDT
-------------- -------------- -------------- 00
104 STBY_WDT
-------------- -------------- -------------- 00
000 RGB_SEN
000 RESERVED
000 RESERVED
4. Exit Self Check by pressing
HOME
and then turn the
TV power off.
5. Cycle AC Power.
(Unplug and Plug AC Cord from the AC Outlet).
KDL-46HX729/55HX729 72
SECTION 7 - SERVICE ADJUSTMENTS
OPTIONAL ADJUSTMENTS
All Sony TVs are set for optimal viewing performance. Refer to the
following instructions if the customer requests additional adjustments.
SETTING WHITE BALANCE ADJUSTMENTS
White Balance adjustment data is located on the Digital Service
Menu.
1. TV must be in standby Mode. (POWER off).
2. Press the following buttons on the Remote Commander
within a second of each other:
DISPLAY
Channel 5
Volume +
POWER
DIGITAL
SERVICE
001 OP
000 VERS
---
<MAIN>
<EXT>
DM1.301W00AA
RF:01.05
WF1.003W00AA
WF:2.0.0.99
DF1.001W00AA
WF:0B
YM1.010W00AA
CAN:X.XXX
DB2.105W00AA
FDlXXXX
(DM1.301W00A)
DD1.016W00AA
WP0.521W00AA
<PEM>
MID:5D35E910
PM1.012W00LU
PID:021A0000
PB1.000W00LU
PNL:LTY550HQ0301
POP:X.XXX
PL1.011J46LUX
PD1.011J46LUX
3. Press
JUMP
or
OPTIONS
on the Remote Commander
until the
VPC menu displays.
VPC
SERVICE
000
000
DATA_COPY
BU_TRANS 0
4. Press
2
to move to “006 WB” Category.
VPC
SERVICE
006
000
WB
R_DRV 128
5. To change the data value of the
R_DRV, press
3
to
increase the value or
6
to decrease the value.
NOTE: The data value must be set between the range
1 to 255.
6. Press
1
to move to the next item (
001 G_DRV).
7. To change the data value, press
3
to increase the
value or
6
to decrease the value.
8. Repeat steps 6 and 7 for each of the following items:
002 B_DRV
003 R_BKG
004 G_BKG
005 B_BKG
9. To save the changes, press
MUTING
then press
0
.
10. To exit service mode, press
HOME
or turn the TV
power off.
KDL-46HX729/55HX729 73
SECTION 7 - SERVICE ADJUSTMENTS
RESETTING THE TV TO FACTORY
CONDITION
Use the following instructions to restore the User Adjustments and
Channel Memory settings to the preset factory conditions.
1. Turn the TV On by pressing
POWER
.
2. While holding down the on the Remote Commander,
press the
POWER button on the side of the TV.
3. The set restarts and displays the Initial Setup screen.
This may take several minutes.
RESETTING THE TV TO FACTORY CONDITION
USING SERVICE MODE
1. TV must be in standby Mode. (POWER off).
2. Press the following buttons on the Remote Commander
within a second of each other:
DISPLAY
Channel
5
Volume
+
POWER
3. If necessary, press
JUMP
or
OPTIONS
to go to DIGITAL
mode.
4. Press the following buttons on the Remote Commander
within a second of each other:
Press
8
MUTING
0
.
“SERVICE” changes to green RST.
RST executes the command and displays EXE.
EXE-RST displays green, then red indicating the TV is
writing the data.
5. When the process is complete the green SERVICE text
displays and the LED display as shown below:
TIMER
Standby
POWER
6. Cycle AC Power
(Unplug and Plug AC Cord from the AC Outlet).
The set restarts and displays the Initial Setup screen.
This may take several minutes.
KDL-46HX729/55HX729
74
Sony Corporation
Sony Technology Center
Technical Services
Service Publication Department
9-888-421-02
English
2011CJ74WEB-1
Printed in USA
© 2011.3
is a trademark of Sony Electronics
Reproduction in whole or part without written permission is prohibited. All rights reserved
Click on the first or last page to see other KDL-46HX729 / KDL-55HX729 service manuals if exist.