Sony KDL-40W4500 / KDL-40W4710 / KDL-40W4720 / KDL-40W4730 / KDL-46W4500 / KDL-46W4710 / KDL-46W4720 / KDL-46W4730 / KDL-52W4500 / KDL-52W4710 / KDL-52W4730 Service Manual ▷ View online
- 8 -
SECTION 2 DISASSEMBLY
2-1. Rear Cover Removal
2-2. Stand Removal
=>
=>
=>
=>
=>
=>
=>
=>
=>
=>
=>
=>
=>
=>
=>
=>
=>
=>
=>
=>
=>
=>
=>
=>
=>
2-3. Loudspeaker Removal
2-4. Side Jack Bracket Assy Removal
Clips
Remove the rear cover fixing screws indicated and pull the rear cover
gently backwards away from the back of the TV set.
gently backwards away from the back of the TV set.
Remove the 4 stand fixing screws as indicated.
To remove the loudspeaker disconnect the speaker cables and then
pull the loudspeaker gently backwards away from the back of the TV
set.
pull the loudspeaker gently backwards away from the back of the TV
set.
To remove the side jack bracket assy release the 2 clips circled.
Screw Part number(s) and Description(s)
1) 2-580-640-01 SCREW, +BVTP2 4X16 (21 Screws)
2) 7-685-648-79 SCREW, +BVTP 3X12 TYPE2 IT-3 (3 Screws)
3) 2-580-608-01 SCREW, +PSW M5X16 (6 Screws)
2) 7-685-648-79 SCREW, +BVTP 3X12 TYPE2 IT-3 (3 Screws)
3) 2-580-608-01 SCREW, +PSW M5X16 (6 Screws)
Screw Part number(s) and Description(s)
2-580-608-01 SCREW, +PSW M5X16 (4 Screws)
=>
=>
=>
=>
1
=>
1
=>
1
=>
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
2
2
2
3
3
3
3
3
3
=>
=>
- 9 -
2-6. D4 Board Removal (52 inches)
2-7. D5 Board Removal (52 inches)
2-8. G5 Board Removal (52 inches)
2-5. BGE Board Removal
To remove the D4 board disconnect all connectors and then remove the
6 screws circled and ease the board gently away from the back of the
TV set.
6 screws circled and ease the board gently away from the back of the
TV set.
Note: Refer to page 4 - Hirose MDF61 connector.
To remove the BGE board disconnect all connectors and then remove
the 9 screws circled and ease the board gently away from the back of the
TV set.
the 9 screws circled and ease the board gently away from the back of the
TV set.
To remove the D5 board disconnect all connectors and then remove the
4 screws circled and ease the board gently away from the back of the
TV set.
4 screws circled and ease the board gently away from the back of the
TV set.
Note: Refer to page 4 - Hirose MDF61 connector.
Screws
Screws
Screws
Screws
Screw Part number(s) and Description(s)
2-580-629-01 SCREW, +BVST 3X8 (9 Screws)
Screw Part number(s) and Description(s)
2-580-629-01 SCREW, +BVST 3X8 (6 Screws)
Screw Part number(s) and Description(s)
2-580-629-01 SCREW, +BVST 3X8 (4 Screws)
Screws
To remove the G5 board disconnect all connectors and then remove the
6 screws circled and ease the board gently away from the back of the
TV set.
6 screws circled and ease the board gently away from the back of the
TV set.
Screw Part number(s) and Description(s)
2-580-629-01 SCREW, +BVST 3X8 (6 Screws)
- 10 -
2-9. H3E Board Removal
2-10. H4 Board Removal
2-11. IP5 Board Removal (40/46 inches)
To remove the H3E board disconnect the connector and then release the
clips circled and gently ease the board towards you and away from the
back of the TV set.
clips circled and gently ease the board towards you and away from the
back of the TV set.
To remove the H4 board disconnect the connector and then release the
clip circled and ease the board gently towards you and away from the
back of the TV set.
clip circled and ease the board gently towards you and away from the
back of the TV set.
To remove the IP5 board disconnect all connectors and then remove the
6 screws circled and ease the board gently away from the back of the
TV set.
6 screws circled and ease the board gently away from the back of the
TV set.
Note: Refer to page 4 - Hirose MDF61 connector.
Clips
Clip
Screws
Screw Part number(s) and Description(s)
2-580-629-01 SCREW, +BVST 3X8 (6 Screws)
- 11 -
3-1. How to enter the Service Mode
Service adjustments to this model can be performed using the
supplied Remote Commander RM-ED011.
supplied Remote Commander RM-ED011.
SECTION 3 SERVICE MENUS
3.
The following menu appears on the screen (See Pic.1).
4.
Move to the corresponding adjustment item using the
‘ ’ or ‘ ’ arrow buttons on the Remote Commander.
‘ ’ or ‘ ’ arrow buttons on the Remote Commander.
5.
Press the ‘ ’ arrow button to enter into the required menu
item.
item.
6.
Adjust the data value using the ‘ ’ or ‘ ’ arrow buttons on
on the Remote Commander.
on the Remote Commander.
7.
To go back at any time press the ‘Return’ button on the Remote
Commander.
Commander.
8.
Press the ‘Menu’ button on the Remote Commander to quit
the Service Mode when all adjustments have been completed.
the Service Mode when all adjustments have been completed.
Note :
•
To place the Remote Commander in ‘Service Mode’ press the
following buttons together for two seconds.
following buttons together for two seconds.
•
To use the Remote Commander in ‘Service Mode’ press the
rewind button on the Remote Commander twice.
rewind button on the Remote Commander twice.
TT will then appear in the bottom right hand corner of the TV.
+
1.
Turn on the power to the TV set and enter into the stand-by
mode.
mode.
2.
Press the following sequence of buttons on the Remote
Commander.
Commander.
Pic.1
3-2. Product Version
1.
The following menu appears on the screen when you enter the
‘Product Version’ menu (See Pic.2). Be sure to check all pages.
‘Product Version’ menu (See Pic.2). Be sure to check all pages.
Pic.2
3-3. Service Config
1.
The following menu appears on the screen when you enter the
‘Service Config’ menu (See Pic.3).
‘Service Config’ menu (See Pic.3).
Pic.3
i+
5
+
(ON SCREEN (DIGIT 5) (VOLUME +) (TV)
DISPLAY)
DISPLAY)
•
To take the Remote Commander out of ‘Service Mode’ press the
same buttons above together again for two seconds or remove
the batteries from the Remote Commander.
same buttons above together again for two seconds or remove
the batteries from the Remote Commander.
•
After carrying out the service adjustments, to prevent the
customer accessing the ‘Service Menu’ switch the TV set
OFF and then ON again.
customer accessing the ‘Service Menu’ switch the TV set
OFF and then ON again.
Rewind
Button
Button
i+
5
+
(ON SCREEN (DIGIT 5) (VOLUME +) (TV)
DISPLAY)
DISPLAY)
I/
TV
(TV POWER)
(ON SCREEN
DISPLAY)
DISPLAY)
(DIGIT 5)
(VOLUME +)
Click on the first or last page to see other KDL-40W4500 / KDL-40W4710 / KDL-40W4720 / KDL-40W4730 / KDL-46W4500 / KDL-46W4710 / KDL-46W4720 / KDL-46W4730 / KDL-52W4500 / KDL-52W4710 / KDL-52W4730 service manuals if exist.