Sony KDL-40W4500 / KDL-40W4710 / KDL-40W4720 / KDL-40W4730 / KDL-46W4500 / KDL-46W4710 / KDL-46W4720 / KDL-46W4730 / KDL-52W4500 / KDL-52W4710 / KDL-52W4730 Service Manual ▷ View online
-
4
-
CAUTION
Due to changes in the caution note
for MDF-61 connector, the caution
note has been placed in Appendix-A
for MDF-61 connector, the caution
note has been placed in Appendix-A
- 5 -
SPECIFICATIONS
Television System
Channel Coverage
Colour/Video System
Analogue:
Depending on your country/region
B/G/H, D/K, L, I
Depending on your country/region
B/G/H, D/K, L, I
Digital:
Depending on model
DVB-T/DVB-C
Depending on model
DVB-T/DVB-C
Analogue: VHF : E2-E12
UHF : E21-E69
CATV : S1-S20
HYPER : S21-S41
D/K: R1-R12, R21-R69
L: F2-F10, B-Q, F21-F69
I: UHF B21-B69
Digital: VHF/UHF
UHF : E21-E69
CATV : S1-S20
HYPER : S21-S41
D/K: R1-R12, R21-R69
L: F2-F10, B-Q, F21-F69
I: UHF B21-B69
Digital: VHF/UHF
Analogue:
PAL, SECAM
NTSC 3.58/4.43
(VIDEO IN)
PAL, SECAM
NTSC 3.58/4.43
(VIDEO IN)
Digital:
MPEG-2 MP@ML/HL, H.264/MPEG-4 AVC
HP@L4.0, MP@L3.0
MPEG-2 MP@ML/HL, H.264/MPEG-4 AVC
HP@L4.0, MP@L3.0
Input/Output Terminals [REAR]
General Specifications
1: 21-pin Euro connector
(CENELEC standard)
Inputs for Audio and Video signals.
Inputs for RGB.
Inputs for RGB.
Outputs of TV Video and Audio
signals.
signals.
Power Requirements
220 - 240V
Power Consumption/
Standby
(40 inches):
Approx 205W/0.2W (Home/Standard mode)
Approx 234W/0.2W (Shop/Vivid mode)
Approx 234W/0.2W (Shop/Vivid mode)
(46 inches):
Approx 256W/0.2W (Home/Standard mode)
Approx 282W/0.2W (Shop/Vivid mode)
Approx 282W/0.2W (Shop/Vivid mode)
(52 inches):
Approx 257W/0.2W (Home/Standard mode)
Approx 293W/0.2W (Shop/Vivid mode)
Approx 293W/0.2W (Shop/Vivid mode)
2: 21-pin Euro connector
(CENELEC standard)
(CENELEC standard)
Inputs for Audio and Video signals.
Inputs for RGB and S Video.
Inputs for RGB and S Video.
Outputs of Video and Audio signals
(Selectable). SmartLink interface.
(Selectable). SmartLink interface.
Dimensions
(40 inches):
Approx 986x684x279mm (With stand)
Approx 986x646x110mm (Without stand)
Approx 986x646x110mm (Without stand)
(46 inches):
Approx 1120x782x307mm (With stand)
Approx 1120x742x115mm (Without stand)
Approx 1120x742x115mm (Without stand)
(52 inches):
Approx 1262x871x347mm (With stand)
Approx 1262x829x119mm (Without stand)
Approx 1262x829x119mm (Without stand)
Weight
Approx 23.0kg (40 inches with stand)
Approx 19.5kg (40 inches without stand)
Approx 31.0kg (46 inches with stand)
Approx 26.5kg (46 inches without stand)
Approx 39.5kg (52 inches with stand)
Approx 33.0kg (52 inches without stand)
Approx 19.5kg (40 inches without stand)
Approx 31.0kg (46 inches with stand)
Approx 26.5kg (46 inches without stand)
Approx 39.5kg (52 inches with stand)
Approx 33.0kg (52 inches without stand)
Component In
Supported formats: 1080p, 1080i,
720p, 576p, 576i, 480p, 480i
Y: 1 Vp-p, 75 ohms, 0.3 negative
sync
720p, 576p, 576i, 480p, 480i
Y: 1 Vp-p, 75 ohms, 0.3 negative
sync
PB/CB: 0.7 Vp-p, 75 ohms
PR/CR: 0.7 Vp-p, 75 ohms
PR/CR: 0.7 Vp-p, 75 ohms
Other Features
High Picture & Sound Quality, Bravia Sync,
Full HD Resolution 1920x1080, XMB,
Live Colour Creation / WCG-CCFL Backlight,
High Dynamic Contrast Ratio, USB Input,
Full HD Resolution 1920x1080, XMB,
Live Colour Creation / WCG-CCFL Backlight,
High Dynamic Contrast Ratio, USB Input,
3 HDMI inputs, PC input, New S-Force, PAP,
MPEG Noise Reduction, Digital Media Port,
Radio Screen Saver, Picture Frame Mode,
Radio Screen Saver, Picture Frame Mode,
24P True Cinema, PAP, PIP Freeze, Photo Map.
HDMI Inputs
Video: 1080/24p, 1080p, 1080i,
720p, 576p, 576i, 480p, 480i
Audio: Two channel linear PCM
32, 44.1 and 48kHz,
16, 20 and 24 bits
Analogue audio: 500mVrms,
720p, 576p, 576i, 480p, 480i
Audio: Two channel linear PCM
32, 44.1 and 48kHz,
16, 20 and 24 bits
Analogue audio: 500mVrms,
(HDMI IN 2 only)
PC Input
Video:15 Pin D Sub Connector
Audio: Minijack
Audio: Minijack
Sound Output
DMPORT
Digital Media Port
Right and Left speaker
2 x 10W (RMS)
Digital Out
Digital Optical Jack
Audio Output: Phono jack
LAN
10BASE-T/100BASE-TX connector
CAM
Conditional Access Module Slot
Input/Output Terminals [SIDE]
Remote control system : Infrared control
Headphone jack
Stereo mini jack
Power requirements
3V dc
2 batteries IEC designation
2 batteries IEC designation
R06 (size AA)
Audio input
Phono jacks
Video input
Phono jack
USB input
USB port
HDMI input
HDMI Connector
Design and specifications are subject to change without notice.
-
6-
CONNECTORS
2 Pin Connector (SCART)
HDMI Connector
5 Pin D Sub Connector (PC)
Pin No
AV-1
AV-2
Signal
Signal Level
1
•
•
Audio Output B
(Right)
(Right)
Standard Level: 0.5V rms
Impedance: less than 1K
Impedance: less than 1K
Ω*
2
•
•
Audio Input B
(Right)
(Right)
Standard Level: 0.5V rms
Impedance: more than 10K
Impedance: more than 10K
Ω*
3
•
•
Audio Output A
(Left)
(Left)
Standard Level: 0.5V rms
Impedance: less than 1K
Impedance: less than 1K
Ω*
4
•
•
Ground (Audio)
5
•
•
Ground (Blue)
6
•
•
Audio Input A (Left)
Standard Level: 0.5V rms
Impedance: more than 10K
Impedance: more than 10K
Ω*
7
•
•
Blue Input
0.7V +/- 3dB, 75
Ω, positive
8
•
•
Function Select
(AV control)
(AV control)
High State (9.5~12V): AV mode
Low State (0~2V): TV mode
Impedance: more than 10K
Low State (0~2V): TV mode
Impedance: more than 10K
Ω*
Capacitance: less than 2nF
9
•
•
Ground (Green)
10
-
•
AV Link
11
•
•
Green Input
0.7V +/- 3dB, 75
Ω, positive
12
-
•
Open
13
•
•
Ground (Red)
14
•
•
Ground (Blanking)
15
•
•
Red Input
0.7V +/- 3dB, 75
Ω, positive
•
•
S signal Chroma Input
0.3V +/-3dB, 75
Ω, positive
16
•
•
Blanking Input
(Y Signal)
(Y Signal)
High State (1~3V)
Low State (0~0.4V)
Impedance: 75
Low State (0~0.4V)
Impedance: 75
Ω
17
•
•
Ground
(Video Output)
(Video Output)
18
•
•
Ground
(Video Input)
(Video Input)
19
•
•
Video Output
1V +/-3dB, positive sync 0.3V (-3+10dB)
20
•
•
Video Input
1V +/-3dB, positive sync 0.3V (-3+10dB)
•
•
Video Input Y
(S Signal)
(S Signal)
1V +/-3dB, positive sync 0.3V (-3+10dB)
21
•
•
Common Ground
(Shield)
(Shield)
1
3
5
7
9
11
13
15
17
19
21
2
4
6
8
10
12
14
16
18
20
19
17
15
13
11
9
7
5
3
1
18
16
14
12
10
8
6
4
2
5
4
3
2
1
10
9
8
7
6
15
14
13
12
11
Pin
No
No
Signal Assignment
Pin
No
No
Signal Assignment
Pin No
Signal Assignment
1
Red Output
6
Red Return
11
Monitor IDO in display
2
Green Output
7
Green Return
(Ground)
(Ground)
12
DCC Serial Data
3
Blue Output
8
Blue Return (Ground)
13
Horizontal Sync
4
Unused
9
+5V DC
14
Vertical Sync
5
Ground
10
Sync Return (Ground)
15
DCC Serial Clock
Pin
No
Signal Assignment
Pin No
Signal Assignment
1
TMDS Data2+
11
TDMS Clock Shield
2
TMDS Data2 Shield
12
TMDS Clock-
3
TMDS Data2-
13
CEC
4
TMDS Data1+
14
Reserved (N.C. on device)
5
TMDS Data1 Shield
15
SCL
6
TMDS Data1-
16
SDA
7
TMDS Data0+
17
DDC/CEC Ground
8
TMDS Data0 Shield
18
+5V power
9
TMDS Data0-
19
Hot Plug Detect
10
TMDS Clock+
-
7-
Ver 4.0
EGL SELF DIAGNOSTIC SOFTWARE
The identification of errors within the EG1L chassis is triggered in one of two ways :- 1: Busy or 2: Device failure to respond to IIC. In the
event of one of these situations arising the software will first try to release the bus if busy (Failure to do so will report with a continuous flash-
ing LED) and then communicate with each device in turn to establish if a device is faulty. If a device is found to be faulty the relevant device
number will be displayed through the LED (Series of flashes which must be counted).
event of one of these situations arising the software will first try to release the bus if busy (Failure to do so will report with a continuous flash-
ing LED) and then communicate with each device in turn to establish if a device is faulty. If a device is found to be faulty the relevant device
number will be displayed through the LED (Series of flashes which must be counted).
LED Error Codes and Descriptions
Self Diagnostic Screen Display
To bring up the self diagnostic screen display
i+
5
+
(ON SCREEN (DIGIT 5) (VOLUME +) (TV)
DISPLAY)
DISPLAY)
In standby mode, press the following sequence of buttons in quick succession on the remote commander as shown below:
Note that this differs from entering the service mode (volume + )
(TV POWER)
(ON SCREEN
DISPLAY)
DISPLAY)
(DIGIT 5)
(VOLUME -)
The following menu appears as shown below:
LED
Blink
Error Description
Comment
Error (Comp Ref)
2
DC_DET
Power Supply failure (12V)
DC_Err
6
Panel Det Error
PANEL_DET (VERD pin 40) - Level is below 0.83V
PAN_Err
7
Internal Temperature Error
TMP_Err
8
Audio Protection
AU-PROT (VERD pin 5) level is low
AUD_Err
9
HFR Error
Tcon_rdy (VERD pin 113) level is low or no acknowledge
from Cayeene-S/T
from Cayeene-S/T
HFR_Err
10
Digital Error
Digital CPU no response to DPI commands
DIG_err
11
NVM Error
EEPROM Error (No read/write available)
NVM_Err
12
I2C Error (VCT)
VCT I2C bus error
I2C_Err
13
Balancer Error
PANEL_DET (VERD pin 40) - level between 0.83V~2.48V)
BAL_Err
14
HDMI Error
HDCP cannot be set up correctly
HDMI_Err
15
Tuner Error
IF or PLL no response
TUN_Err
16
I2C CH1 (VERD_TAS)
I2C CH1 error
TAS_Err
17
I2C VERD_NVM/RTC)
I2C CH2 error
RTC_Err
18
Digital Demod
No Acknowledge
DEM_Err
19
USB Error
USB over-current detected
USB_Err
20
CI Error
CI_Err
21
VCT Error
VCT_Err
22
MSP Error
MSP no reponse to I2C
MSP_Err
Click on the first or last page to see other KDL-40W4500 / KDL-40W4710 / KDL-40W4720 / KDL-40W4730 / KDL-46W4500 / KDL-46W4710 / KDL-46W4720 / KDL-46W4730 / KDL-52W4500 / KDL-52W4710 / KDL-52W4730 service manuals if exist.