Sony KDL-40W4500 / KDL-40W4710 / KDL-40W4720 / KDL-40W4730 / KDL-46W4500 / KDL-46W4710 / KDL-46W4720 / KDL-46W4730 / KDL-52W4500 / KDL-52W4710 / KDL-52W4730 Service Manual ▷ View online
Appendix-A - Caution Notes
1. MDF-61 Connector (Removal)
Slide the slider to release slider
lock.
Press the centre lock tab to
release the lock and pull the
connector up
Remove connector
2. MDF-61 Connector (Refiitting)
Hold the centre of connector
Press centre of connector to insert
Slide the slider to lock connector
VER 2.0
Appendix-A - Caution Notes
3. The harness must not be crossed or twisted
4. Wire Dressing at connector
The harness must not bend more than
45 degrees from the direction of the
connector base to avoid crossing or
twisting.
45 degrees from the direction of the
connector base to avoid crossing or
twisting.
5. Wire distance at connector
The distance between each wire must
be wider than 4mm to ensure isolation
from lamp voltage.
be wider than 4mm to ensure isolation
from lamp voltage.
Appendix-A - Caution Notes
3. The harness must not be crossed or twisted
4. Wire Dressing at connector
The harness must not bend more than
45 degrees from the direction of the
connector base to avoid crossing or
twisting.
45 degrees from the direction of the
connector base to avoid crossing or
twisting.
5. Wire distance at connector
The distance between each wire must
be wider than 4mm to ensure isolation
from lamp voltage.
be wider than 4mm to ensure isolation
from lamp voltage.
Appendix-A - Caution Notes
3. The harness must not be crossed or twisted
4. Wire Dressing at connector
The harness must not bend more than
45 degrees from the direction of the
connector base to avoid crossing or
twisting.
45 degrees from the direction of the
connector base to avoid crossing or
twisting.
5. Wire distance at connector
The distance between each wire must
be wider than 4mm to ensure isolation
from lamp voltage.
be wider than 4mm to ensure isolation
from lamp voltage.