DOWNLOAD Sony KDL-40R450A / KDL-46R450A Service Manual ↓ Size: 2.17 MB | Pages: 27 in PDF or view online for FREE

KDL-40R450A/46R450A 21

Power Supply Board (6),
Main Board (4), Bottom Bracket (2)

Not Used

Not Used

RC Terminal (1)

Bracket, Vesa Top A (2)

Not Used

Main Board  (1) 

 

Power Supply Board (1),

RC Terminal (1)

Table Top Stand to TV (2) 

Not Used

Table Top Stand to TV (2)

Power Supply Board (7),
Main Board / Bracket SP (5)

Lower Cover (12), Bracket Vesa (2), 

Bracket AC (2), Bracket Stand (2)

Speaker Baffle (4)

Lower Cover (12), Bracket Vesa (4), 

Bracket AC (2), Bracket Stand (2), 

SCREW +BVTP 3X12 TYPE2 IT-3

SCREW, +PSW M4X12

GEAR SCREW M3X5 22

NA

NA

SCREW, +PSW M5X16

SCREW +BVTP 3X10 TYPE2 IT-3

SCREW, +BVTP 3X8 TYPE2 IT-3

SCREW, +BVTP 4X12 TYPE2 IT-3

7-685-648-71

2-580-602-01

4-465-806-01

2-580-608-11

7-685-647-79

7-685-646-79

2-580-639-01

Speaker Baffle (4)

KDL-40R450A/46R450A 22

 

 

2-580-608-11 

SCREW, +PSW M5X16

 

 

 

(SCREWS TO ATTACH TABLE-TOP STAND TO LCD TV)  

  

 

For product protection and safety reasons, Sony strongly recommends 

 

 

 

that you use the screws provided with the TV.  

 

 

 

CAUTION: These screws cannot be used to secure the TV  

 

 

 

to the Wall Mount Brackets.

 

 

2-580-602-01 

SCREW, +PSW M4X12

 

 

 

(KDL-46R450A ONLY)

 

 

 

(ATTACHMENT PARTS FOR WALL-MOUNT BRACKETS)

 

 

4-459-301-11 

GUIDE, QUICK SETUP (ENGLISH VERSION)

 

 

4-459-301-21 

GUIDE, QUICK SETUP (FRENCH VERSION)

 

 

4-459-301-31 

GUIDE, QUICK SETUP (SPANISH VERSION)

 

 

4-459-301-51 

GUIDE, QUICK SETUP (ENGLISH AND SPANISH VERSION)

 

 

4-458-509-11 

MANUAL, INSTRUCTION(ENGLISH VERSION)

 

 

4-458-509-21 

MANUAL, INSTRUCTION (FRENCH VERSION)

 

 

4-458-509-31 

MANUAL, INSTRUCTION (SPANISH VERSION)

 

 

4-456-270-11 

SUPPLEMENT (STAND INSTALLATION)

 

 

3-299-071-06 

FLYER, SAFETY

 

 

4-464-002-01 

GASKET (40FANF)

 

 

 

(KDL-40R450A ONLY)

 

 

4-464-000-01 

GASKET (46FANF)

 

 

 

(KDL-46R450A ONLY)

 

 

4-463-998-51  

DOUBLE SIDED TAPE A (FANF)

 

 

 

(KDL-40R450A ONLY)

 

 

4-463-999-01  

DOUBLE SIDED TAPE B (BTM)

 

 

 

(KDL-46R450A ONLY)

 

 

4-463-999-11  

DOUBLE SIDED TAPE B (TOP)

 

 

 

(KDL-46R450A ONLY)

 

 

4-414-470-01 

SUPPORT BELT KIT

 

 

1-492-065-11 

REMOTE COMMANDER (RM-YD092)

KDL-40R450A/46R450A A-1

is a trademark of Sony Electronics.

Reproduction in whole or part without written permission is prohibited. All rights reserved.

Encryption key components developed by Sony Corporation contain confidential information and shall be handled under the non-disclosure obligations provided 
in the applicable agreement with Sony Corporation (and/or its subsidiary). 
As part of this agreement specific instructions must be adhered to whenever a Circuit Board containing encryption key components is repaired and/or replaced 
pursuant to the following:

1. 

In the service manual the Circuit Board(s) containing encryption key components shall be identified with a red outline and a  .

2.  Only repair boards or components listed in the service manual shall be utilized for replacement and/or repair.

3.  Disassembly, decryption or reverse-engineering component(s) is strictly prohibited.

4.  Any board in which the Servicer replaces an encryption key component must be placed back into the set it orignally came from and the replaced 

defective component MUST BE DESTROYED. Boards cannot be swapped.

5. 

If a Circuit Board identified with a red outline and a    in the service manual is deemed to be defective:
a. 

and if a core charge is imposed and is covered under the product warranty, the defective un-repaired or modified board MUST BE RETURNED to 
Sony.

b. 

and if the core charge is NOT covered under the product warranty, the defective un-repaired or modified board MUST BE DESTROYED.

6. 

If a unit is destroyed (such as field scrap), the Circuit Board identified with a red outline and a    in the service manual MUST BE DESTROYED. 

KDL-40R450A/46R450A A-1

is a trademark of Sony Electronics.

Reproduction in whole or part without written permission is prohibited. All rights reserved.

Encryption key components developed by Sony Corporation contain confidential information and shall be handled under the non-disclosure obligations provided 
in the applicable agreement with Sony Corporation (and/or its subsidiary). 
As part of this agreement specific instructions must be adhered to whenever a Circuit Board containing encryption key components is repaired and/or replaced 
pursuant to the following:

1. 

In the service manual the Circuit Board(s) containing encryption key components shall be identified with a red outline and a  .

2.  Only repair boards or components listed in the service manual shall be utilized for replacement and/or repair.

3.  Disassembly, decryption or reverse-engineering component(s) is strictly prohibited.

4.  Any board in which the Servicer replaces an encryption key component must be placed back into the set it orignally came from and the replaced 

defective component MUST BE DESTROYED. Boards cannot be swapped.

5. 

If a Circuit Board identified with a red outline and a    in the service manual is deemed to be defective:
a. 

and if a core charge is imposed and is covered under the product warranty, the defective un-repaired or modified board MUST BE RETURNED to 
Sony.

b. 

and if the core charge is NOT covered under the product warranty, the defective un-repaired or modified board MUST BE DESTROYED.

6. 

If a unit is destroyed (such as field scrap), the Circuit Board identified with a red outline and a    in the service manual MUST BE DESTROYED.